Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Laitealue => Aiheen aloitti: matsukan - 25.05.12 - klo:17.39
-
Mikään kanava ei toimi mutta kanavalistaus haetaan kyllä. Kanavien vaihtamien ei toimi.
dmesg | grep -i dvb
[ 10.854585] DVB: registering new adapter (Mantis DVB adapter)
[ 11.736184] DVB: registering adapter 0 frontend 0 (Philips TDA10023 DVB-C)...
ja
lscpi
05:00.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI Bridge Controller [Ver 1.0] (rev 01)
Onko kellään vinkkiä siitä mistä pitäisi lähteä purkamaan ja etsimään vikaa?
Mitään virhelokia ei tulostu ainakaan dmesg ja syslogiin.
scan -c
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
dumping lists (0 services)
Done.
-
Mikään kanava ei toimi mutta kanavalistaus haetaan kyllä. Kanavien vaihtamien ei toimi.
Enpä tiedä, mutta minulla on ikivanha kortti ja toimii kuin junan vessa.
ari@ari:~$ dmesg | grep -i dvb
[ 11.780129] DVB: registering new adapter (FlexCop Digital TV device)
[ 13.659523] b2c2-flexcop: found 'Zarlink MT352 DVB-T' .
[ 13.659526] DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)...
[ 13.659581] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
ari@ari:~$ lspci
03:00.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
T. Ari
-
Veikkaisin ettei modulit lataudu kokeile
sudo modprobe tda10023; sudo modprobe mantis
Jos tämä autaa lisää tda10023 ja mantis /etc/modules tiedostoon. Lspci:llä saat tarkempaa tietoa mitkä ajurit ja modulit on käytössä kun lisäät -vvn loppuun lspci -vvn
Mutta ajurit taitaa olla kunnossa jos kaffeine löytää kortin.
-
Juu kanavia löytyy mutta program guide on tyhjä.
esim tässä kaffeine ilmoittaa yle:sta :
-
Tuli sellainenkin mieleen että tuolla kortilla ei saa muistaakseni minkäänlaista kuvaa jos kortinlukija on kiinni. Kyseessä lienee terratec cinergy C kortti?
-
Juu muttei kortinlukijaa.
Missä olisi ohjeet channel.conf:n tekemiseen koska asun alueella jossa ei varsinaisesti ole valmiiksi tuota fi-*** tiedostoa.
-
Loppujen lopuksi tein tuon fi-* tiedoston ja sen jälkeen tein mplayerille channels.conf tiedoston ohjeiden mukaisesti ja teevee kuvaa ulos kortista.
Mtv3 tuotti seuraavankaltaista tekstiä mutta FOX toistui ongelmitta
VIDEO MPEG2(pid=1259) AUDIO MPA(pid=3276) NO SUBS (yet)! PROGRAM N. 0
VIDEO: MPEG2 720x576 (aspect 3) 25.000 fps 4000.0 kbps (500.0 kbyte/s)
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[vdpau] Error when calling vdp_device_create_x11: 1
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 53.35.0 (external)
Mismatching header version 53.32.2
Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
==========================================================================
==========================================================================
Requested audio codec family [mpg123] (afm=mpg123) not available.
Enable it at compilation.
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 2 ch, floatle, 256.0 kbit/8.33% (ratio: 32000->384000)
Selected audio codec: [ffmp2float] afm: ffmpeg (FFmpeg MPEG layer-1 and layer-2 audio)
==========================================================================
AO: [pulse] 48000Hz 2ch floatle (4 bytes per sample)
Starting playback...
Unsupported PixelFormat 61
Unsupported PixelFormat 53
Unsupported PixelFormat 81
Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.
VO: [xv] 720x576 => 1024x576 Planar YV12
A:2167.2 V:2167.7 A-V: -0.452 ct: -0.080 24/ 24 15% 0% 49.5% 10 0
[mp2float @ 0x7f2b1d7784c0]Header missing
[mp2float @ 0x7f2b1d7784c0]Header missing
[mpeg2video @ 0x7f2b1d7784c0]ac-tex damaged at 6 13
[mpeg2video @ 0x7f2b1d7784c0]Warning MVs not available
[mpeg2video @ 0x7f2b1d7784c0]concealing 0 DC, 0 AC, 0 MV errors
A:2172.3 V:2169.3 A-V: 2.950 ct: -0.244 65/ 65 9% 0% 208.1% 50 0
************************************************
**** Your system is too SLOW to play this! ****
************************************************
Possible reasons, problems, workarounds:
- Most common: broken/buggy _audio_ driver
- Try -ao sdl or use the OSS emulation of ALSA.
- Experiment with different values for -autosync, 30 is a good start.
- Slow video output
- Try a different -vo driver (-vo help for a list) or try -framedrop!
- Slow CPU
- Don't try to play a big DVD/DivX on a slow CPU! Try some of the lavdopts,
e.g. -vfm ffmpeg -lavdopts lowres=1:fast:skiploopfilter=all.
- Broken file
- Try various combinations of -nobps -ni -forceidx -mc 0.
- Slow media (NFS/SMB mounts, DVD, VCD etc)
- Try -cache 8192.
- Are you using -cache to play a non-interleaved AVI file?
- Try -nocache.
Read DOCS/HTML/en/video.html for tuning/speedup tips.
If none of this helps you, read DOCS/HTML/en/bugreports.html.
A:2179.6 V:2171.8 A-V: 7.780 ct: -0.488 126/126 7% 0% 248.0% 111 0
No bind found for key 'MOUSE_BTN2'.
A:2260.7 V:2198.7 A-V: 61.992 ct: -0.529 800/800 5% 0% 287.0% 785 0
Exiting... (Quit)
i:~/.mplayer$ mplayer "dvb://FOX"MPlayer svn r34540 (Ubuntu), built with gcc-4.6 (C) 2000-2012 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing dvb://FOX.
dvb_tune Freq: 250000000
TS file format detected.
VIDEO MPEG2(pid=2000) AUDIO MPA(pid=2100) NO SUBS (yet)! PROGRAM N. 0
VIDEO: MPEG2 720x576 (aspect 3) 25.000 fps 10000.0 kbps (1250.0 kbyte/s)
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
[vdpau] Error when calling vdp_device_create_x11: 1
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 53.35.0 (external)
Mismatching header version 53.32.2
Selected video codec: [ffmpeg2] vfm: ffmpeg (FFmpeg MPEG-2)
Kortti ainakin toimii mikä on tärkeintä.
-
Niin tietenkin terminaalissa tulee tätä kun käynnistää kaffeine :
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave
.
Oisko kenelläkkään korjausehdostusta:
https://bugs.launchpad.net/ubuntu/+source/kde4libs/+bug/959151
https://git.reviewboard.kde.org/r/103699/
-
solved
poistin .kde hakemiston ja ilmeisesti se ratkaisi ongelman.