Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Laitealue => Aiheen aloitti: veivi - 14.01.08 - klo:16.52
-
Käytössäni on Kubuntu 7.10 Gutsy Gibbon ja Nvidia driver version 100.14.19
Ongelma: Jokaisen uudelleen käynnistämisen jälkeen näytön virkistystaajuus tipahtaa 60 Hz, jolloin ongelma on ratkaistava kirjoittamalla konsoleen § nvidia-settings ja asentaa hertsit 100:aan. Miten saisin tuon 100Hz pysymään vakiona?
Ja tässä ote /etc/X11/xorg.conf -tiedostoa
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Wed Sep 12 14:30:30 PDT 2007
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
#Section "InputDevice"
# Identifier "Configured Mouse"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/input/mice"
# Option "Protocol" "ImPS/2"
# Option "ZAxisMapping" "4 5"
# Option "Emulate3Buttons" "true"
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fi"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "evdev"
Option "CorePointer"
Option "Name" "Logitech USB Gaming Mouse"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons" "false"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "SyncMaster"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 160.0
# 1280x1024 @ 100Hz hsync: 108.5kHz
Modeline "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
EndSection
Section "Device"
Identifier "nVidia Corporation NV43 [GeForce 6600 GT]"
Driver "nvidia"
Option "NoLogo" "False"
BusID "PCI:5:0:0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6600 GT"
BusID "PCI:5:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV43 [GeForce 6600 GT]"
Monitor "SyncMaster"
DefaultDepth 24
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "2048x1536" "1920x1440" "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1280x1024 +0+0; 1024x768 +0+0; 832x624 +0+0; 800x600 +0+0; 720x400 +0+0; 640x480 +0+0"
Option "SLI" "Auto"
SubSection "Display"
Depth 24
Modes "nvidia-auto-select"
EndSubSection
EndSection
t. veivi
-
Ongelma on lähes ratkaistu, eli hertsit pysyy buutin jälkeen :)
Mutta...näyttäisi siltä, että koneeni käyttää kaksia eri ajureita (nv ja nvidian rajoitettuja 100.14.19) ja tähän haluaisin kyllä pikaisesti neuvoa, miten toimia?
Alla on hieman kerrottu siitä mitä olen tähän saakka tehnyt
1. Varmuuskopio omaan kotikansioon
sudo cp /etc/X11/xorg.conf /home/käyttäjätunnuksesi/xorg.conf_backup
2. Tämä komento muokkasi xorg.conf-tiedostoa haluamaani suuntaan
sudo nvidia-xconfig --add-argb-glx-visuals
3. Otin xorgista kopion työpöydälle, jota aloin muokkaamaan
sudo cp /etc/X11/xorg.conf /home/käyttäjätunnuksesi/Desktop/xorg.conf
4. Poistin tiedoston: /home/käyttäjätunnuksesi/.kde/share/config/displayconfigrc (kotikansio->näytä->näytä piilotiedotot) ja sitten koneen buuttaus
sudo shutdown -r now
5. Seuraavaksi valitsen nvidian asetukset (resoluutio 1280x1024 ja 100Hz) painan apply ja quit
sudo nvidia-settings
6. Kokeilen säilyvätkö asetukset-> Ctrl+Alt+backspace->kirjaudun uudelleen sisään ja tarkistan-> nvidian asetukset ;D
7. Jos jotain sattui menemän mönkään, niin otin käyttöön alkuperäiset xorg.conffat ja yritin uudelleen :'(
sudo cp /home/käyttäjätunnuksesi/xorg.conf /etc/X11/xorg.conf
startx
Ja tältä se näyttää nyt
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Wed Sep 12 14:30:30 PDT 2007
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Sep 12 14:29:35 PDT 2007
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
#Section "InputDevice"
# Identifier "Configured Mouse"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/input/mice"
# Option "Protocol" "ImPS/2"
# Option "ZAxisMapping" "4 5"
# Option "Emulate3Buttons" "true"
### Monitors -----------------------------------------------
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "int10"
Load "vbe"
Load "glx"
Load "v4l"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fi"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "evdev"
Option "CorePointer"
Option "Name" "Logitech USB Gaming Mouse"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons" "false"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "SyncMaster"
VendorName "Samsung"
ModelName "Syncmaster 959NF"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 160.0
# Monitori 100Hz -------------------------------------------------------------------------
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
Modeline "1280x1024_100" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
Modeline "1280x960_100" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
Modeline "1024x768_100" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
Modeline "800x600_100" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 160.0
Gamma 1
# Monitori 100Hz -------------------------------------------------------------------------
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
Modeline "1280x1024_100" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
Modeline "1280x960_100" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
Modeline "1024x768_100" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
Modeline "800x600_100" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
EndSection
Section "Monitor"
#
Identifier "monitor1"
Gamma 1
EndSection
Section "Monitor"
#
Identifier "monitor2"
Gamma 1
EndSection
Section "Device"
Identifier "nVidia Corporation NV43 [GeForce 6600 GT]"
Driver "nvidia"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6600 GT"
BusID "PCI:5:0:0"
EndSection
Section "Device"
#
Identifier "device1"
Driver "nv"
VendorName "NVIDIA"
BoardName "NVIDIA GeForce 6 Series"
BusID "PCI:4:0:0"
Screen 0
EndSection
Section "Device"
#
Identifier "device2"
Driver "nvidia"
BoardName "nv"
BusID "PCI:5:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV43 [GeForce 6600 GT]"
Monitor "SyncMaster"
DefaultDepth 24
Option "AddARGBVisuals" "True"
Option "SLI" "Auto"
Option "NvAGP" "1"
Option "NoLogo" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "1280x1024_100" "1024x768_100" "1280x960_100" "800x600_100"
EndSubSection
EndSection
Section "Screen"
# Removed Option "metamodes" "1280x1024_100_0 +0+0; 1024x768_100_0 +0+0; 1280x960_100_0 +0+0; 800x600_100_0 +0+0"
# Removed Option "metamodes" "nvidia-auto-select 1024x768_100 +0+0"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "0"
Option "metamodes" "1280x1024_100_0 +0+0; 1024x768_100_0 +0+0; 1280x960_100_0 +0+0; 800x600_100_0 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
#
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultDepth 24
EndSection
Section "Screen"
#
Identifier "screen2"
Device "device2"
Monitor "monitor2"
DefaultDepth 24
EndSection
-
Kokeile järjestelmä>ylläpito>näytöt ja kuva muuta molemmat näytöt sekä näyttö 1 että näyttö 2 haluamaasi resoluutioon että virkistys taajuuteen, on jollekin ollut apu siitä.
Terveisin jori52 ;)
-
Ei onnistunut tuo :( joten tein seuraavaa:
I decided to update by drivers from 100.14.19 to 169.07 by taking the following steps:
1-Disabled restricted driver usage from Restricted Drivers Manager. (poista rajoitetut ajurit käytöstä)
2-Removed the 100.14.19 drivers (nvidia-glx-new) via Synaptic Package Manager. (poista kokonaan Synapticilla)
3-Stopped gdm/kdm and installed the latest nvidia drivers (NVIDIA-Linux-x86-169.09-pkg1.run) and also modified the "linux-restricted-modules-common" file to prevent the restricted modules from being loaded at boot (e.g. DISABLED_MODULES="nv").
4-Restarted gdm/kdm. Lähde: http://ubuntuforums.org/showthread.php?t=649875 (http://ubuntuforums.org/showthread.php?t=649875)
1. Lataa uusimmat ajurit työpöydällesi http://www.nvidia.com/object/linux_display_ia32_169.09.html (http://www.nvidia.com/object/linux_display_ia32_169.09.html)
2. Tekstitilassa X:n ollessa suljettuna
2.1 Sammuta X Ctrl+Alt+backspace
3. Paina Ctrl+Alt+F1
4. Kirjoita cd ~/Desktop
sudo /etc/init.d/kdm stop tai sudo /etc/init.d/gdm
5. Paina jälleen Ctrl+Alt+F1 (nyt pitäisi näkyä cd ~/Desktop)
sudo sh NVIDIA-Linux-x86-169.09-pkg1.run
6. Vastaa kaikkiin kohtiin YES ja Ajureiden pitäisi olla asennettuna
7. Lopuksi Disabloi nv-ajuri (e.g. DISABLED_MODULES="nv")
sudo nano /etc/default/linux-restricted-modules-common
Ja tässä uusin xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder3) Wed Sep 12 14:30:30 PDT 2007
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
#Section "InputDevice"
# Identifier "Configured Mouse"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/input/mice"
# Option "Protocol" "ImPS/2"
# Option "ZAxisMapping" "4 5"
# Option "Emulate3Buttons" "true"
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fi"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "evdev"
Option "CorePointer"
Option "Name" "Logitech USB Gaming Mouse"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons" "false"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "SyncMaster"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 160.0
ModeLine "1024x768_100" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "800x600_100" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
EndSection
Section "Device"
Identifier "nVidia Corporation NV43 [GeForce 6600 GT]"
Driver "nvidia"
Option "NoLogo" "False"
BusID "PCI:5:0:0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 6600 GT"
BusID "PCI:5:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV43 [GeForce 6600 GT]"
Monitor "SyncMaster"
DefaultDepth 24
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "1024x768" "800x600"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "metamodes" "1024x768_100_0 +0+0; 800x600_100_0 +0+0"
Option "SLI" "Auto"
SubSection "Display"
Depth 24
Modes "nvidia-auto-select"
EndSubSection
EndSection