Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Asentaminen ja käyttöönotto => Aiheen aloitti: jukih - 17.02.07 - klo:11.22
-
Jatkan tässä keskustelua ongelmasta, jonka alunperin esitin tuolla kiitokset osiossa.
http://forum.ubuntu-fi.org/index.php?topic=8449.40
Lyhyesti: ongelmana on Kubuntun käynnistys viime kernelipäivityksen jälkeen (ei välttämättä siihen kuitenkaan liity?). Saan vain mustan ikkunan, josta kuitenkin olen palstaneuvojien avulla päässyt eteenpäin ctrl alt F1:llä. Antamalla komentokehotteeseen 'startx' käynnistyy X ja pääsen Gnome graafiseen tilaan (jopa suuri resoluutio tuettuna).
Sisäänkirjautuessa (ennen startx:ää) tulee virheilmoitus
"configuration error - unkown item 'FAIL_DELAY' "
Olen yrittänyt myös apt-get update ja apt-get distro-upgrade komentoja, jotka sinänsä menevät läpi (ihan kaikkia varastoja ei taida löytyä mutta näin se on ollut jo kauan, en usko että tässä tilanne on muuttunut).
(Myös
sudo dpkg-reconfigure -phigh xserver-xorg
on kokeiltu.)
Näytönohjain on siis ATI radeon 9600 ja monitori EIZO Flexscan L557 (LCD näyttö).
Alla asiaan liittyen xorg.conf sisältö.
Yksi juttu vielä: sammutettaessa tulee jotain valituksia tuosta wacom-driverista.
Apuja, ehdotuksia?
======================
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "ServerFlags"
Option "AIGLX" "off"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "fi"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30.0 - 65.0
VertRefresh 50.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
-
Ratkaisin tämän nyt sitten uudelleenasennuksella. Ensin Dapper CD:ltä ja sitten distro upgrade Edgyyn.
Nyt ainakin Gnome-puoli toimii. Onneksi olin alunperin asentanut seuraavasti osioiden:
juuri / 6.8 GB
/home 29 GB
/boot 133 MB
/linux-swap 1.1 GB
Nyt sitten formatoin muut mutta /homen jätin ennalleen. Näin "arvotieto" ja monet asetuksista säilyivät.
Jos jotakuta kiinnostaa niin ohessa xorg-tiedoston nykyinen sisältö, Äkkiseltään en ymmärrä miksei edellinen toiminut. Ehkei vika ollutkaan tässä.
==== xorg.conf =================
...
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fi"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 51.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "0"
EndSection
-
Ratkaisin tämän nyt sitten uudelleenasennuksella. Ensin Dapper CD:ltä ja sitten distro upgrade Edgyyn.
Nyt ainakin Gnome-puoli toimii. Onneksi olin alunperin asentanut seuraavasti osioiden:
juuri / 6.8 GB
/home 29 GB
/boot 133 MB
/linux-swap 1.1 GB
Nyt sitten formatoin muut mutta /homen jätin ennalleen. Näin "arvotieto" ja monet asetuksista säilyivät.
Täydennys: huomasin, että kovalevy oli kovin täynnä - noin 100% käyttöaste Linux osioissa. Tämä saattoi olla perimmäinen syy?? ???
-
Pistäthän jatkossa pidemmät tekstirivit [ code] [ /code] tagien sisään
Jotta olisi helpompi selailla pitkää listaa
-
Pistäthän jatkossa pidemmät tekstirivit [ code] [ /code] tagien sisään
Jotta olisi helpompi selailla pitkää listaa
Nyt on tuokin tehty -
Palasin tänne, kun asia tuli taas ajankohtaiseksi Gutsyyn päivittämisen yhteydessä.
Taas katsellaan mustaa ruutua.
No, ehkä se tästä päivityspakettien myötä vielä valkenee.
-
Mmmm, laitapa vesa ajuriksi, ja sitten käynnistät uudelleen. Jos pääset gutsyyn, niin voisit koettaa restricted-driver-manageria (vai mikä se nyt oli). Se kuulema toimii monella.
-
Mmmm, laitapa vesa ajuriksi, ja sitten käynnistät uudelleen. Jos pääset gutsyyn, niin voisit koettaa restricted-driver-manageria (vai mikä se nyt oli). Se kuulema toimii monella.
Kiitoksia. Itse asiassa olin jo päässyt eteenpäin antamalla tässäkin tapauksessa komentorivillä
sudo dpkg-reconfigure -phigh xserver-xorg
Noiden restricted ajureitten käyttöä pitää vielä kokeilla. Tällä hetkellä kone on selvästi hitaampi kuin Feisty -aikoina. Mistä lie johtuva?