Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Ubuntu tietokoneissa => Aiheen aloitti: Linkku - 10.02.07 - klo:12.48
-
Asentelin Ubuntun uudelleen kun sain sen kikkailulla täysin jumiin. Nyt uudelleen asennuksen jälkeen en saa enää Berylia käynnistymään vaikka asensin sen samojen ohjeiden avulla kuin viimeksikin. Terminaaliin kun laittaa "beryl manager" niin tulee seuraavanlainen teksi näyttöön:
**************************************************************
* Beryl system compatiblity check *
**************************************************************
Detected xserver : AIGLX
Checking Display :0.0 ...
Checking for XComposite extension : passed (v0.3)
Checking for XDamage extension : passed
Checking for RandR extension : passed
Checking for XSync extension : passed
Checking Screen 0 ...
Xlib: extension "GLX" missing on display ":0.0".
Root visual is not a GL visual
Xlib: extension "GLX" missing on display ":0.0".
beryl: Root visual is not a GL visual
beryl: Failed to manage screen: 0
beryl: No manageable screens found on display :0.0
marko@ubuntu:~$
Eli ilmeisesti jotain vielä puuttuu? Käytössä Ubuntu 6.10 ja Geforce 6800 GT.
Vinkkejä?
-
Mitä sanoo komento
glxgears | grep direct ja miltä näyttää tiedostosi /etc/x11/xorg.conf.
-
Mitä sanoo komento glxgears | grep direct
marko@ubuntu:~$ glxgears | grep direc
Xlib: extension "GLX" missing on display ":0.0".
Ja xorg.conf näyttää seuraavalta:
/etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "rt2300"
Option "XkbLayout" "fi"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV40 [GeForce 6800 GT]"
Driver "nv"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "VP2030 SERIE"
Option "DPMS"
HorizSync 30-75
VertRefresh 50-85
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV40 [GeForce 6800 GT]"
Monitor "VP2030 SERIE"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1400x1050" "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
-Marko-
-
Jatkossa käytä
codetageja.
Komenna sudo gedit /etc/X11/xorg.conf poista rivit
Load "dri"
ja
Section "DRI"
Mode 0666
EndSection
Muuta kohdasta
Driver "nv"
nv:n tilalle nvidia.
-
Kiitos vastauksesta.
Mutta Driver "nv" -> Driver "nvidia" muutoksen jälkeen graafinen liittymä ei auennut olenkaan. Muutos takaisin "nv":ksi auttoi siihen. Eli onko nvidian ajureiden asennus jotenkin epäonnistunut.
-Marko-
-
Asenna Nvidian ajurit.
sudo apt-get install nvidia-glx nvidia-kernel-common ja tee edellä mainittujen ohjeiden mukaan.