Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Asentaminen ja käyttöönotto => Aiheen aloitti: cy - 02.11.06 - klo:19.02
-
Olen yrittänyt asentaa Ubuntua muutamaan otteeseen, mutta asennuksen jälkeen käynnistyksen yhteydessä ruudulle ilmestyy vain:
Grub Loading Stage 1.5
Grub Loading. please wait
ERROR 21
Koneellani on kaksi kovalevyä, toinen Ide ja toinen satalevy. Levyt on osioity seuraavasti
IDE:
Windows 20 Gt
NTFS 46 Gt
NTFS 46 Gt
SATA:
/ 10 Gt
swap 2 Gt
/home 50 Gt
NFTS 65 Gt
NFTS 65 Gt
NFTS 40 Gt
Olen yrittänyt etsiä ongelmaan ratkaisua netistä, mutta mikään ei tunnu toimivan.
-
Grub Loading. please wait
ERROR 21
http://orgs.man.ac.uk/documentation/grub/grub_14.html#SEC106
21 : Selected disk does not exist
This error is returned if the device part of a device- or full file name refers to a disk or BIOS device that is not present or not recognized by the BIOS in the system.
Eli järjestelmäsi ei boottaa tuolta sata-levyltä.
"Pienellä uudelleenjärjestelyllä" saisit varmasti Ubuntun siirrettyä IDE-levyn osiolle.
Edes koko Linuxia ei tarvisisi siirtää, riittää, kun ne osat, joita tarvitaan käynnistykseen
ja tunnistamaan sata-ohjaimesi.
Olisi toki mielenkiintoista nähdä Grubin menu.lst. Koska olet asentanut ko. osioille,
saat järjestelmän varmaankin käyntiin rescue -tilassa CD:ltä?
-
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 1
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda1 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(sd1,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery mode) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
title Ubuntu, kernel 2.6.15-26-386
root (sd0,0)
kernel /boot/vmlinuz-2.6.15-26-386 root=/dev/sda1 ro quiet splash
initrd /boot/initrd.img-2.6.15-26-386
savedefault
boot
title Ubuntu, kernel 2.6.15-26-386 (recovery mode)
root (sd0,0)
kernel /boot/vmlinuz-2.6.15-26-386 root=/dev/sda1 ro single
initrd /boot/initrd.img-2.6.15-26-386
boot
title Ubuntu, memtest86+
root (sd0,0)
kernel /boot/memtest86+.bin
boot
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hda1
title Microsoft Windows XP Professional
root (hd0,0)
savedefault
makeactive
chainloader +1
Yritin partition magicillä siirtää windows osiota hieman ide levyn alusta, jotta siihen mahtuisi /boot osio. PM ei kuitenkaan onnistu suorittamaan toimintoa enkä saa kutistettua windows osiota alle 8 Gt:n, jotta /boot osio olisi buutattavissa
-
nosto
-
Ei sitä pitäisi tarvita siirtää...
Oletko itse vaihtanut root (sd0,0) h:n ässäksi? Eka kertaa näen sellaisen nimittäin.
title Ubuntu, kernel 2.6.15-26-386
root (sd0,0)
kernel /boot/vmlinuz-2.6.15-26-386 root=/dev/sda1 ro quiet splash
initrd /boot/initrd.img-2.6.15-26-386
savedefault
boot
Kokeile (sd0,0) tilalla (hd1,0), luin jostakin ubuntuforums.org että Grubin mielesta IDE on aina ennen SATA levyä. Ja onhan osion numerot oikein? Osiot näkee hyvin sudo fdisk -l ( jossa l on pieni L).
EDIT: Niin tai jos sen sitten pitää olla ässä niin anna olla sen sitten ::) ;D