Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Ubuntu tietokoneissa => Aiheen aloitti: pbman - 21.10.05 - klo:20.38
-
Uusin ubuntu ei suostu käyttämään 1024 resoa. Alunperin ainoa vaihtoehto oli 640 ja kun jonkun ohjeen mukaan vaihdoin xorg.conf:iin ajuriksi "vesa" niin resoihin tuli kaksi vaihtoehtoa 640 ja 800. Ideoita?
Näytönohjein on integroitu Nvidia:n nForce, joka tunnistautuu seuraavasti: "NVIDIA Corporation NV18 [GeForce4 MX - nForce GPU]". Alunperin tuossa driver kohdassa luki "nv". Ekaa päivää Ubuntu kehissä ja näyttää kyllä lupaavalta. Linuxista on kokemusta jonkin verran.
Section "Device"
Identifier "NVIDIA Corporation NV18 [GeForce4 MX - nForce GPU]"
Driver "vesa"
BusID "PCI:2:0:0"
EndSection
Section "Monitor"
Identifier "Q15"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV18 [GeForce4 MX - nForce GPU]"
Monitor "Q15"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
-
mietin että rajoittaako esim. tunnistettu näyttö ??
koska sinulla ei ole noita horiz ja vetical lukuja ollenkaan ....
-
mietin että rajoittaako esim. tunnistettu näyttö ??
koska sinulla ei ole noita horiz ja vetical lukuja ollenkaan ....
Ei ole ei.. mitenkäs tuon korjaisi? Voinhan mä heittää siihen jotkut universaalit säädöt.. tietäs vaan mitkä on sopivat arvot ja miten ne tuohon esitetään.
Erikoistahan tuossa on sekin että virkistystaajuus on kiinteät vissiin 78 hertsiä joka on paneelille aika kova. Näytön natiivi on vissiin 60, eli siinäkin siis tuo pakotettu on väärä.
-
jaahas mulla on slackwaren xorg.conf tämmönen kohta....
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 28.0 - 110.0
VertRefresh 50.0 - 200.0
EndSection
en tiijä käykö miten ubuntuun mkun mulla tässä ubuntukoneessa on tunnistettu nnäyttö....
ootas palaan asiaan kun käyn lkattoon tosta toisesta koneesta...
;)
-
jees tässä ton celleronkoneen xorg.conf
siinä on integroitu näytönohjain ja joku vanha näyttö jota ei tunnisteta ....
toivottavasti tästä olisi apua :)
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool,
using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual
page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades
*only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically
updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
Section "Module"
Load "GLcore"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fi"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Intel Corporation 82810E DC-133 CGC [Chipset Graphics
Controller]"
Driver "i810"
BusID "PCI:0:1:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-40
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82810E DC-133 CGC [Chipset Graphics
Controller]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection