Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Asentaminen ja käyttöönotto => Aiheen aloitti: jkateva - 05.09.06 - klo:21.16
-
Asensin koneeseeni Kubuntun, mutta mielestäni en saa näytönohjaimen ajureita toimimaan. En saa siis laitettua 1024x768 suurempaa resoluutiota, eikä Display/Hardware kohdassa tunnisteta näyttöä eikä näytönohjainta... Mikä avuksi? Asensin Adeptilla nvidia-glx paketin ja kirjoittelin konsoliin sen jälkeen "sudo nvidia-glx-config enable". Eikä näytä auttavan...
-
eli varmaan se xorg.conf filun sisältö kannattaapi tulostaa tänne..
cat /etc/X11/xorg.conf
-
Asensin koneeseeni Kubuntun, mutta mielestäni en saa näytönohjaimen ajureita toimimaan. En saa siis laitettua 1024x768 suurempaa resoluutiota, eikä Display/Hardware kohdassa tunnisteta näyttöä eikä näytönohjainta... Mikä avuksi? Asensin Adeptilla nvidia-glx paketin ja kirjoittelin konsoliin sen jälkeen "sudo nvidia-glx-config enable". Eikä näytä auttavan...
Dapperissa pitää vielä asentaa nvidia-kernel-common paketti, joko adeptilla tai suoraan päätteellä sudo apt-get install nvidia-kernel-common. Ja toisekseen herjaako tuo "sudo nvidia-glx-config enable" komento mitään siinä päätteessä.
-
Dapperissa pitää vielä asentaa nvidia-kernel-common paketti, joko adeptilla tai suoraan päätteellä sudo apt-get install nvidia-kernel-common. Ja toisekseen herjaako tuo "sudo nvidia-glx-config enable" komento mitään siinä päätteessä.
nvidia-kernel-common on asennettu ja nvidia-glx. Tuo "sudo nvidia-glx-config enable" herjaa:
Error: your X configuration has been altered.
This script cannot proceed automatically. If you believe that this
not correct, you can update the md5sum entry executing the following
command:
md5sum /etc/X11/xorg.conf | sudo tee /var/lib/x11/xorg.conf.md5sum
otherwise edit manually /etc/X11/xorg.conf to change the Driver section
from nv to nvidia.
xorg.conf sisältö:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fi"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "NVIDIA Corporation NVIDIA Default Card"
Driver "nv"
BusID "PCI:5:0:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NVIDIA Default Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
-
no tuohon ainakin:
Section "Device"
Identifier "NVIDIA Corporation NVIDIA Default Card"
Driver "nv"
BusID "PCI:5:0:0"
EndSection
Driver tilalle: nvidia
ja tuohon:
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NVIDIA Default Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
voit naputella enemman resoluutioita itse.. eli siis:
cd /etc/X11/
sudo cp xorg.conf xorg.conf_backup
sudo kate xorg.conf
ja sinne vaan kirjotteleen..
-
Ja kohdasta
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Poista rivi Load "dri"
-
Mitä tuo dri-rivi on ja mihin vaikuttaa?
-
Mitä tuo dri-rivi on ja mihin vaikuttaa?
http://dri.freedesktop.org/wiki/
Kait ATI-ohjaimet sitä haluavat. Nvidiasta en tiiä, yleisesti kaikissa ohjeissa sanotaan että ati käyttäjät laittakaa tää ja nvidia käyttäjät älköötten.
-
Jostain luin että jos käyttää nv -ajuria se saa olla mutta jos käytää nvidia -ajuria dri saattaa sekoittaa ajurin tms.
-
jos et saa em. vinkkien jälkeen toimimaan, niin voisit kokeilla envya: http://www.albertomilone.eu/europeo/nvidia_scripts1.html . Siinä on vaan haittapuolena, että se poistaa kaikki restricted modulit. Eli jos sulla on esim. jollekin wlan-kortille (itse asentamat) ajurit, niin ne ei ton envyn asennuksen jälkeen enää toimi. Mutta kaikki alkais ainakin 7600gt:ssä pelittää sen jälkeen.
itsellänikin on 7600gt, jä tässä on mun conffi:
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fi"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
Option "Buttons" "7"
Option "ButtonMapping" "1 2 3 6 7"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "SONY TV"
#ModeLine "1216x676" 79.392 1232 1344 1472 1664 696 741 746 796 -hsync +vsync
ModeLine "1216x676" 74.250 1216 1390 1430 1650 676 725 730 750 +hsync +vsync
#ModeLine "1216x676" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
# ModeLine "1216x676" 66.5 1216 1272 1400 1584 676 677 680 700 +hsync +vsync
#DisplaySize 322 179 ½½ 412 229 !
#DisplaySize 400 210
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "GeForce 7600GT"
BusID "PCI:5:0:0"
Option "ConnectedMonitor" "DFP"
Option "AllowGLXWithComposite" "true"
Option "RenderAccel" "1"
Option "HWcursor" "1"
Option "CursorShadow" "1"
Option "UseEdidDpi" "FALSE"
Option "DPI" "96 x 96"
EndSection
Section "Screen"
#Option "IgnoreEDID" "true"
Option "ConnectedMonitor" "DFP"
#Option "ExactModeTimingsDVI" "True"
# Option "TVOverScan" "6"
Identifier "Default Screen"
Device "Card0"
Monitor "SONY TV"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1216x676"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "true"
EndSection
-
nvidia-kernel-common on asennettu ja nvidia-glx. Tuo "sudo nvidia-glx-config enable" herjaa:
Error: your X configuration has been altered.
This script cannot proceed automatically. If you believe that this
not correct, you can update the md5sum entry executing the following
command:
md5sum /etc/X11/xorg.conf | sudo tee /var/lib/x11/xorg.conf.md5sum
otherwise edit manually /etc/X11/xorg.conf to change the Driver section
from nv to nvidia.
Tuossahan tuo lukee selvällä lontoon kielellä. Eli olisit vain naksauttanut päätteeseen suoraan
md5sum /etc/X11/xorg.conf | sudo tee /var/lib/x11/xorg.conf.md5sum
jonka jälkeen uudelleen
sudo nvidia-glx-config enable
-
nvidia-kernel-common on asennettu ja nvidia-glx. Tuo "sudo nvidia-glx-config enable" herjaa:
Error: your X configuration has been altered.
This script cannot proceed automatically. If you believe that this
not correct, you can update the md5sum entry executing the following
command:
md5sum /etc/X11/xorg.conf | sudo tee /var/lib/x11/xorg.conf.md5sum
otherwise edit manually /etc/X11/xorg.conf to change the Driver section
from nv to nvidia.
Tuossahan tuo lukee selvällä lontoon kielellä. Eli olisit vain naksauttanut päätteeseen suoraan
md5sum /etc/X11/xorg.conf | sudo tee /var/lib/x11/xorg.conf.md5sum
jonka jälkeen uudelleen
sudo nvidia-glx-config enable
en tiedä miten muilla, mutta ainakin itselläni tuo
md5sum /etc/X11/xorg.conf | sudo tee /var/lib/x11/xorg.conf.md5sum
komentaminen sekoitti koko Device-osaston. Kannattaa siis muistaa ottaa varmuuskopio xorg.confista ennen tuon tekemistä (# sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_pakkappi :) )
-
en tiedä miten muilla, mutta ainakin itselläni tuo
md5sum /etc/X11/xorg.conf | sudo tee /var/lib/x11/xorg.conf.md5sum
komentaminen sekoitti koko Device-osaston. Kannattaa siis muistaa ottaa varmuuskopio xorg.confista ennen tuon tekemistä (# sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_pakkappi :) )
Ei se
md5sum /etc/X11/xorg.conf | sudo tee /var/lib/x11/xorg.conf.md5sum
-komento sitä sekoita, mutta sen jälkeiset komennot ehkä. Tuo komento sen sijaa vain laskee tiedostosta /etc/X11/xorg.conf md5-summan (eri siis muuta sitä mitenkään), ja kirjoittaa kyseisen summan tiedostoon /var/lib/x11/xorg.conf.md5sum.
-
en tiedä miten muilla, mutta ainakin itselläni tuo
md5sum /etc/X11/xorg.conf | sudo tee /var/lib/x11/xorg.conf.md5sum
komentaminen sekoitti koko Device-osaston. Kannattaa siis muistaa ottaa varmuuskopio xorg.confista ennen tuon tekemistä (# sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_pakkappi :) )
Ei se
md5sum /etc/X11/xorg.conf | sudo tee /var/lib/x11/xorg.conf.md5sum
-komento sitä sekoita, mutta sen jälkeiset komennot ehkä. Tuo komento sen sijaa vain laskee tiedostosta /etc/X11/xorg.conf md5-summan (eri siis muuta sitä mitenkään), ja kirjoittaa kyseisen summan tiedostoon /var/lib/x11/xorg.conf.md5sum.
joo oikeessa oot, sori! tosiaankin kun tuon ajoin, ja sitten kun määräsin sen konffauksen, niin tämän jälkeen meni sekas.