Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Asentaminen ja käyttöönotto => Aiheen aloitti: Sorkkarauta - 30.07.06 - klo:14.58
-
Asensin Ubuntun ja toimii mainiosti. Ikävä kyllä Windows -vaihtoehto katosi käynnistyksen yhteydessä. Mitä pitäisi tehdä jotta saisin sen takaisin?
???
-
Et nyt kertonut onko sinulla useampia kovalevyjä kuin yksi ja mille Ubuntu on asennettu.
Sen saa selville näinkin: kirjoita päätteeseen Ubuntussa sudo fdisk -l ja copypasteta tänne mitä siitä tulee.
Kerro myös, mitä tiedosto /boot/grub/menu.lst sisältää (cat /boot/grub/menu.lst)
Näillä tiedoilla voin auttaa enemmän.
-
Et nyt kertonut onko sinulla useampia kovalevyjä kuin yksi ja mille Ubuntu on asennettu.
Sen saa selville näinkin: kirjoita päätteeseen Ubuntussa sudo fdisk -l ja copypasteta tänne mitä siitä tulee.
Kerro myös, mitä tiedosto /boot/grub/menu.lst sisältää (cat /boot/grub/menu.lst)
Näillä tiedoilla voin auttaa enemmän.
Minulla on kaksi kiintolevyä jossa hdb on Ubuntulle varattu. Wintoosa pyörii sitten hda:lla vastaavasti.
Ja sitten se menu.lst:
default fat_stage1_5 menu.lst~ stage1
device.map jfs_stage1_5 minix_stage1_5 stage2
e2fs_stage1_5 menu.lst reiserfs_stage1_5 xfs_stage1_5
pupu@pupu-desktop:/boot/grub$ cat menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/hdb1 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd1,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery mode) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
title Ubuntu, kernel 2.6.15-26-386
root (hd1,0)
kernel /boot/vmlinuz-2.6.15-26-386 root=/dev/hdb1 ro quiet splash
initrd /boot/initrd.img-2.6.15-26-386
savedefault
boot
title Ubuntu, kernel 2.6.15-26-386 (recovery mode)
root (hd1,0)
kernel /boot/vmlinuz-2.6.15-26-386 root=/dev/hdb1 ro single
initrd /boot/initrd.img-2.6.15-26-386
boot
title Ubuntu, kernel 2.6.15-23-386
root (hd1,0)
kernel /boot/vmlinuz-2.6.15-23-386 root=/dev/hdb1 ro quiet splash
initrd /boot/initrd.img-2.6.15-23-386
savedefault
boot
title Ubuntu, kernel 2.6.15-23-386 (recovery mode)
root (hd1,0)
kernel /boot/vmlinuz-2.6.15-23-386 root=/dev/hdb1 ro single
initrd /boot/initrd.img-2.6.15-23-386
boot
title Ubuntu, memtest86+
root (hd1,0)
kernel /boot/memtest86+.bin
boot
-
Et nyt kertonut onko sinulla useampia kovalevyjä kuin yksi ja mille Ubuntu on asennettu.
Sen saa selville näinkin: kirjoita päätteeseen Ubuntussa sudo fdisk -l ja copypasteta tänne mitä siitä tulee.
Kerro myös, mitä tiedosto /boot/grub/menu.lst sisältää (cat /boot/grub/menu.lst)
Näillä tiedoilla voin auttaa enemmän.
Kiitos vinkeistä, osasinkin ratkaista homman itse - jos siinä nyt enää mitään ratkaistavaa oli :D
-
Kerro meillekin. Halutaan tietää ratkasu.
-
Kerro meillekin. Halutaan tietää ratkasu.
Juu, sehän oli ihan helppo loppujen lopuksi.
title Windows 95/98/NT/2000
root (hd0,0)
makeactive
chainloader +1
Kun sain tietää mikä tiedosto sitä Grubia pyörittää (menu.lst), niin oli verrattain helppo paikallistaa mistä se teki valinnat käynnistyksen yhteydessä.
Eli lisäsin menu.lst perään vain nuo ratkaisurivit ja sillä homma lähti käyntiin.