Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Asentaminen ja käyttöönotto => Aiheen aloitti: Sazoro - 02.07.06 - klo:12.10
-
Asensin kubuntun (siis ubuntun lisäksi)ja nyt ei näytön asetukset toimi enkä saa niitä muutettua siitä valikosta. antaa liian pienen koon. Ubuntussa homma toimi automaattisesti mutta ei tässä. Kuinka pääsisin muuttamaan asetukset oikein?
-
sudo dpkg-reconfigure xserver-xorg
-
Muuten ihan hyvä neuvo, kiitoksia vaan mutta kun eteen avautuu pelkkä enkunkielinen "juttu" enkä osaa tarpeeksi jotta ymmärtäisin mihin kaikkeen vastaa ok ja mihin en. Eikö ole jotain muuta tapaa tehdä tuota?
-
Mitä sanoo komento
cat /etc/X11/xorg.conf
-
Resoluutiotako yrität muuttaa? Mihin resoon? Mikä näytönohjain? Ja näytä tosiaan toi xorg.conf tuloste.
-
En tiedä mikä näytönohjain mutta gnomessa toimii ihan ok. Pitäisi saada 1028x1024 mutta sellaista ei köydy tuosta graafisesta työkalusta.
Tuo komento antaa tällaisen:
zoja@zoja-desktop:~$ cat /etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fi"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. Radeon RV100 QY [Radeon 7000/VE]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "99G"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon RV100 QY [Radeon 7000/VE]"
Monitor "99G"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes " "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
zoja@zoja-desktop:~$
-
Eli muuta SubSection "Display"
Depth 24
Modes "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection kohdasta ensimmäiseksi se resoluutio jota haluat että käytetään.
-
Juu mutta millä käskyllä pääsen muuttamaan noita asetuksia?
-
Juu mutta millä käskyllä pääsen muuttamaan noita asetuksia?
Kirjoita komentoriviin: sudo gedit /etc/X11/xorg.conf (Avaa tekstinkäsittelyohjelman).
-
Juu mutta millä käskyllä pääsen muuttamaan noita asetuksia?
No, no. Vililikku kertoi tuo maagisen loitsun jo ensimmäisessä viestissään. Tosin
tuo editointi käy helpommin editorilla käpistelemällä /etc/X11/xorg.conf tiedostoa. Esim.
sudo vi /etc/X11/xorg.conf
Vi on perustekstieditori, joka löytyy kaikista Linux-jakeluista.
Periaatteessa kun koneellesi on asennettu kaksi Ubuntu-jakelua, voit verrata niiden /etc/X11/xorg.conf tiedostoja. On jopa mahdollista, että kopioit toimivan xorg.conffin jakeluun, jossa xorg.conf ei toimi.
Ubuntu ja Kubuntu ovat niin samanlaisia jakeluja, ettei niiden asentaminen erikseen ole hirveän fiksua. Ubuntuun voi asentaa tarvittavat KDE-kamat ja vastaavasti Kubuntuun Gnome-palikat.
-
Suurkiitos. Nyt toimii.