Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Laitealue => Aiheen aloitti: runeh - 03.02.11 - klo:21.22
-
Juu myönnetään pihalla ollaan kuin lumiukko tuon kaukkarin suhteen ???
Viritin on Hauppauge Nova-DVB-t USB http://www.hauppauge.co.uk/site/products/data_novatstick.html (http://www.hauppauge.co.uk/site/products/data_novatstick.html)
(Ei saman värisiä kuin linkissä, mutta sama tuotekoodi)
cat /proc/bus/input/devices
I: Bus=0003 Vendor=2040 Product=7070 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:02.1-3/ir0
S: Sysfs=/devices/pci0000:00/0000:00:02.1/usb1/1-3/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=3
B: KEY=14afc336 294284f 0 0 0 4 80158000 2190 40000801 9e96c0 0 900240 10004ffc
Eli LIRC.n asetuksista ei löydy kakea&vastaanotinta.
Minkä valitsen Remote control configurationista:
(Pelkästään Hauppaugen)
Hauppauge DVB-s card (ver. 2.1)
Hauppauge HVR-1100
Hauppauge HVR-1300
Hauppauge Nova-T 500
Hauppauge TV card
Entäs tämä:
IR transmitter, if present:
None
Custom
Command IR : Direct TV Receiver
Command IR : Dish Receiver
Command IR : Motorola Cable box
Command IR : Pioneer Cable box
Command IR : Scientific Atlanta Cable box
Command IR : Sky Satellite Receiver
Microsoft Windows Media Center V2 (usb) : Direct TV Receiver
Microsoft Windows Media Center V2 (usb) : Dish Receiver
Microsoft Windows Media Center V2 (usb) : Motorola Cable box
Microsoft Windows Media Center V2 (usb) : Pioneer Cable box
Microsoft Windows Media Center V2 (usb) : Scientific Atlanta Cable box
Microsoft Windows Media Center V2 (usb) : Sky Satellite Receiver
Serial Port (UART) : Direct TV Receiver
Serial Port (UART) : Dish Receiver
Serial Port (UART) : Motorola Cable box
Serial Port (UART) : Pioneer Cable box
Serial Port (UART) : Scientific Atlanta Cable box
Serial Port (UART) : Sky Satellite Receiver
USB-UIRT2 : Direct TV Receiver
USB-UIRT2 : Dish Receiver
USB-UIRT2 : Motorola Cable box
USB-UIRT2 : Pioneer Cable box
USB-UIRT2 : Scientific Atlanta Cable box
USB-UIRT2 : Sky Satellite Receiver
[nm: jaoin aiheen VDR-keskustelusta (http://forum.ubuntu-fi.org/index.php?topic=29787.msg294015#msg294015)]
-
Eli LIRC.n asetuksista ei löydy kakea&vastaanotinta.
Minkä valitsen Remote control configurationista:
Kokeile vaihtoehtoa "Linux input layer (/dev/input/eventX)". Sama käy kaikkiin evdev-laitteina näkyviin vastaanottimiin.
Entäs tämä:
IR transmitter, if present:
Sinulla ei ole koneessa IR-lähetintä, etkä edes halua ohjata muita laitteita tietokoneen avulla, joten "None".
VDR:n tapauksessa remote-liitännäinen voisi kyllä olla helpompi ratkaisu kuin Lirc, mutta kokeile nyt sitä ensin kun aloitit. Myös Kaffeine on varmaankin mahdollista saada toimimaan Lircin kautta.
-
Huomenta nm :)
Kokeilinkin tuota "Linux input layer (/dev/input/eventX)" vaihtoehtoa, mutta ei tapahdu mitään irw.llä eikä vdr.ssä.
Saan tälläisen virheen kylmä käynnistyksen jälkeen "rc submit urb failed"
Pikainen googlaaminen heitti ensimmäisiä hakuja viitaten kaukosäätimeen...
# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="Linux input layer (/dev/input/eventX)"
REMOTE_MODULES=""
REMOTE_DRIVER="devinput"
REMOTE_DEVICE="/dev/input/event4"
REMOTE_SOCKET=""
REMOTE_LIRCD_CONF="devinput/lircd.conf.devinput"
REMOTE_LIRCD_ARGS=""
#Chosen IR Transmitter
TRANSMITTER="None"
TRANSMITTER_MODULES=""
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE=""
TRANSMITTER_SOCKET=""
TRANSMITTER_LIRCD_CONF=""
TRANSMITTER_LIRCD_ARGS=""
#Enable lircd
START_LIRCD="true"
#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD="false"
#Try to load appropriate kernel modules
LOAD_MODULES="true"
# Default configuration files for your hardware if any
LIRCMD_CONF=""
#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn't have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to "false"
FORCE_NONINTERACTIVE_RECONFIGURATION="false"
START_LIRCMD=""
# Remote settings required by gnome-lirc-properties
REMOTE_MODEL="DVB-T"
REMOTE_VENDOR="DVICO"
# Receiver settings required by gnome-lirc-properties
RECEIVER_MODEL="USB\ Remote"
RECEIVER_VENDOR="DViCO"
-
Saan tälläisen virheen kylmä käynnistyksen jälkeen "rc submit urb failed"
Pikainen googlaaminen heitti ensimmäisiä hakuja viitaten kaukosäätimeen...
No tarjoilitko sitten lämmintä boottia? Sait kuitenkin kaukosäätimen jo jossain vaiheessa toimimaan, joten kyllä se on mahdollista saada pelaamaan myös Lircin kanssa.
Huomaa myös että kaukosäätimen laite voi vaihtua bootissa, eli /dev/input/event4:n sijaan se voi joskus olla vaikkapa /dev/input/event3. Suoran osoituksen sijaan voit käyttää /dev/input/by-id/... tai by-path-linkkejä tai tehdä kaukosäätimelle oman linkin udev-säännöllä.
Voit testata IR-vastaanottimen toimintaa lukemalla suoraan evdev-laitteita. Päätteessä: cat /dev/input/event4 (ja painele sitten kaukosäätimen nappeja). Lircin toimintaa voi testata irw:llä.
-
Juu ei.. Ei onnaa.
Mites oisko siihen remote liitännäiseen ohjetta?
-
Juu ei.. Ei onnaa.
Mikä kohta? Yritä saada jotain ulos sieltä laitteelta cat-komennolla. Ajuripuoli on saatava ensin sellaiseen kuntoon, että vastaanotin antaa elonmerkkejä.
Sammuta Lirc, ettei se varaa laitteita itselleen (sudo service lirc stop).
-
Ei tuu mitään tuolla cat.llä
Poistan nyt LIRC.n ja voisin kokasta sitä remote-liitännäistä.. tuleepahan nää si testailtua :)
-
Ei tuu mitään tuolla cat.llä
Poistan nyt LIRC.n ja voisin kokasta sitä remote-liitännäistä.. tuleepahan nää si testailtua :)
Testaa remote-liitännäistä vasta sitten kun saat evdevin toimimaan. Turhaa työtä muuten.
Eli jos ajuri herjasi IR:stä, käynnistä järjestelmä uudelleen tai ota tikku irti ja kytke takaisin. Tarkista sitten kernelin loki uudelleen ja kokeile laitteita. Muista myös tarkistaa event-laitteen numero, että osaat kokeilla oikeaa tiedostoa.
-
Poistin LIRC.n , käynnistin koneen, päätteessä cat /dev/input/event4
ei tullu ruudulle mitään kun painelin kakea.
cat /proc/bus/input/devices
I: Bus=0003 Vendor=2040 Product=7070 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:02.1-4/ir0
S: Sysfs=/devices/pci0000:00/0000:00:02.1/usb1/1-4/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=3
B: KEY=14afc336 294284f 0 0 0 4 80158000 2190 40000801 9e96c0 0 900240 10004ffc
dmesg
[ 7.281657] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
[ 7.281913] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 7.282270] DVB: registering new adapter (Hauppauge Nova-T Stick)
[ 7.298685] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[ 7.298690] alloc irq_desc for 20 on node -1
[ 7.298692] alloc kstat_irqs on node -1
[ 7.298702] HDA Intel 0000:00:07.0: PCI INT B -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20
[ 7.298705] hda_intel: Disable MSI for Nvidia chipset
[ 7.298742] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 7.493031] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[ 7.704039] DiB0070: successfully identified
[ 7.704109] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-4/input/input4
[ 7.704161] dvb-usb: schedule remote query interval to 50 msecs.
[ 7.704164] dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
[ 7.704532] dib0700: rc submit urb failed
[ 7.704533]
[ 7.704661] usbcore: registered new interface driver dvb_usb_dib0700
[ 8.093031] hda_codec: ALC888: BIOS auto-probing.
[ 8.112162] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1734
[ 8.112251] usbcore: registered new interface driver usblp
[ 10.577473] EXT3-fs (sdb2): using internal journal
[ 13.054217] type=1400 audit(1296829405.097:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1155 comm="apparmor_parser"
[ 13.054424] type=1400 audit(1296829405.097:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1155 comm="apparmor_parser"
[ 13.054543] type=1400 audit(1296829405.097:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1155 comm="apparmor_parser"
[ 13.220680] type=1400 audit(1296829405.261:13): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1154 comm="apparmor_parser"
[ 13.255872] type=1400 audit(1296829405.297:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1169 comm="apparmor_parser"
[ 13.371122] type=1400 audit(1296829405.417:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1170 comm="apparmor_parser"
[ 13.371139] type=1400 audit(1296829405.417:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1162 comm="apparmor_parser"
[ 13.371405] type=1400 audit(1296829405.417:17): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1170 comm="apparmor_parser"
[ 13.371423] type=1400 audit(1296829405.417:18): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1162 comm="apparmor_parser"
[ 13.439920] type=1400 audit(1296829405.485:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1156 comm="apparmor_parser"
[ 14.841063] r8169 0000:03:00.0: eth0: link down
[ 14.841233] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.821029] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 16.821032] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[ 16.821034] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 16.821035] vboxdrv: the usage of hardware performance counters by
[ 16.821036] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 16.821038] vboxdrv: Found 2 processor cores.
[ 16.821251] vboxdrv: fAsync=1 offMin=0xb5f offMax=0xb5f
[ 16.822019] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 16.822022] vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001).
[ 17.847593] usb 1-2: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[ 44.512069] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 44.550564] ISOFS: changing to secondary root
[ 62.944494] Netfilter messages via NETLINK v0.30.
[ 93.954281] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 94.644024] Clocksource tsc unstable (delta = -339111940 ns)
[ 217.453286] lo: Disabled Privacy Extensions
(remote-plugin on nyt asennettu)
-
dib0700: rc submit urb failed
Tuosta virheestä pitäisi päästä eroon. Kokeile ensin vaikkapa vanhemmalla firmwarella, eli siirrä tiedosto /lib/firmware/dvb-usb-dib0700-1.20.fw muualle ja tee symbolinen linkki vanhempaan versioon. Onnistuu komennoilla:
sudo mv /lib/firmware/dvb-usb-dib0700-1.20.fw /
sudo ln -s /lib/firmware/dvb-usb-dib0700-1.10.fw /lib/firmware/dvb-usb-dib0700-1.20.fw
Sammuta sitten VDR (sudo service vdr stop), ota tikku irti, laita takaisin ja tarkista dmesg. Latautuuko firmware ja tuleeko sama virhe edelleen?
Jos tästä ei ollut apua, siirrä uudempi firmware takaisin:
sudo mv /dvb-usb-dib0700-1.20.fw /lib/firmware/
Kokeile sitten uudempia ajureita. Paketin saa yaVDR:n PPA:sta. Tässä suora linkki, jos et käytä samasta paikasta ladattua VDR:ää: https://launchpad.net/~yavdr/+archive/stable-vdr/+files/v4l-dvb-dkms_0%7E20101018.15139_all.deb
-
Tein tähän saakka:
Koodia:
sudo mv /lib/firmware/dvb-usb-dib0700-1.20.fw /
sudo ln -s /lib/firmware/dvb-usb-dib0700-1.10.fw /lib/firmware/dvb-usb-dib0700-1.20.fw
Sammuta sitten VDR (sudo service vdr stop), ota tikku irti, laita takaisin ja tarkista dmesg. Latautuuko firmware ja tuleeko sama virhe edelleen?
Virhe hävisi, mutta firmware ei lataannu. dmesg
[ 23.453969] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
[ 23.454517] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 23.455756] type=1400 audit(1296832202.416:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=655 comm="apparmor_parser"
[ 23.456180] DVB: registering new adapter (Hauppauge Nova-T Stick)
[ 23.458623] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 23.459604] nvidia: module license 'NVIDIA' taints kernel.
[ 23.459608] Disabling lock debugging due to kernel taint
[ 23.533505] HDA Intel 0000:00:07.0: PCI->APIC IRQ transform: INT B -> IRQ 34
[ 23.533509] hda_intel: Disable MSI for Nvidia chipset
[ 23.533561] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 23.565025] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 23.566336] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 23.566339] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 23.566341] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 23.595944] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 23.699071] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[ 23.916334] DiB0070: successfully identified
[ 23.916334] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-4/input/input2
[ 23.916334] dvb-usb: schedule remote query interval to 50 msecs.
[ 23.916334] dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
[ 23.916635] usbcore: registered new interface driver dvb_usb_dib0700
[ 24.160005] hda_codec: ALC888: BIOS auto-probing.
[ 24.546920] nvidia 0000:04:00.0: PCI->APIC IRQ transform: INT A -> IRQ 34
[ 24.546920] nvidia 0000:04:00.0: setting latency timer to 64
[ 24.546920] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 24.548106] NVRM: loading NVIDIA UNIX x86 Kernel Module 270.18 Tue Jan 18 21:44:45 PST 2011
[ 24.692751] EXT3-fs (sdb2): using internal journal
[ 26.170615] type=1400 audit(1296832205.132:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1082 comm="apparmor_parser"
[ 26.170891] type=1400 audit(1296832205.132:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1082 comm="apparmor_parser"
[ 26.198621] r8169 0000:03:00.0: eth0: link down
[ 26.198778] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.201283] ppdev: user-space parallel port driver
[ 26.206733] parport_pc 00:07: reported by Plug and Play BIOS
[ 26.206776] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 26.300146] lp0: using parport0 (interrupt-driven).
[ 26.347526] NVRM: failed to register with the ACPI subsystem!
[ 26.653060] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 26.653063] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[ 26.653064] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 26.653065] vboxdrv: the usage of hardware performance counters by
[ 26.653066] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 26.653068] vboxdrv: Found 2 processor cores.
[ 26.654018] vboxdrv: fAsync=1 offMin=0x14c29 offMax=0x14c29
[ 26.654757] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 26.654759] vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001).
[ 27.850199] usb 1-2: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[ 30.688757] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 30.719222] ISOFS: changing to secondary root
[ 37.428681] NVRM: failed to unregister from the ACPI subsystem!
[ 37.489237] NVRM: failed to register with the ACPI subsystem!
[ 51.541351] Netfilter messages via NETLINK v0.30.
(Pääsin tästä eroon "Clocksource tsc unstable (delta = -339111940 ns" laittamalla BIOS.sta ACPI.n Disabled)
Siirrän uudemman firen takaisin ja kokeilen noita uusia v4l ajureita.
-
Virhe hävisi, mutta firmware ei lataannu.
Firmwarea ei ladata silloin kun tikku on lämpimässä tilassa: found a 'Hauppauge Nova-T Stick' in warm state
Tikun pitäisi olla varmaan kauemmin virratta.
Mutta olisit kokeillut IR:ää nyt kun virhettä ei tullut.
-
Oh nou :-[
Laitoin uudet firet takas--> virhe palasi...
No laitan ne vanhat back ja siis miten nyt kokeilen IR.ää?
Nyt on muuten event2
I: Bus=0003 Vendor=2040 Product=7070 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:02.1-4/ir0
S: Sysfs=/devices/pci0000:00/0000:00:02.1/usb1/1-4/input/input2
U: Uniq=
H: Handlers=kbd event2
B: EV=3
B: KEY=14afc336 294284f 0 0 0 4 80158000 2190 40000801 9e96c0 0 900240 10004ffc
-
No laitan ne vanhat back ja siis miten nyt kokeilen IR.ää?
Nyt on muuten event2
cat /dev/input/event2
-
Okey nyt tapahtuu! Mutta cat.llä heitti lupa evätty, ajoin sudolla (ruudulla ei näy mitään kakea painellessa) dmesg
[ 645.191439] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 645.391278] dib0700: firmware started successfully.
[ 645.895278] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
[ 645.895329] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 645.895334] DVB: registering new adapter (Hauppauge Nova-T Stick)
[ 646.111235] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[ 646.327218] DiB0070: successfully identified
[ 646.327287] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-4/input/input3
[ 646.331324] dvb-usb: schedule remote query interval to 50 msecs.
[ 646.331327] dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
[ 646.331327] dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
[ 665.757970] [UFW BLOCK] IN=ppp0 OUT= MAC= SRC=94.137.254.38 DST=85.78.216.209 LEN=131 TOS=0x00 PREC=0x00 TTL=113 ID=11150 PROTO=UDP SPT=61899 DPT=37979 LEN=111 MARK=0x14
[ 730.825687] [UFW BLOCK] IN=ppp0 OUT= MAC= SRC=95.78.17.92 DST=85.78.216.209 LEN=131 TOS=0x00 PREC=0x00 TTL=245 ID=59731 PROTO=UDP SPT=37564 DPT=37979 LEN=111 MARK=0x14
[ 742.744906] [UFW BLOCK] IN=ppp0 OUT= MAC= SRC=118.243.87.232 DST=85.78.216.209 LEN=131 TOS=0x00 PREC=0x00 TTL=114 ID=14066 PROTO=UDP SPT=18253 DPT=37979 LEN=111 MARK=0x14
[ 762.179600] dib0700: Unknown remote controller key: 1C 5 1 0
[ 762.283593] dib0700: Unknown remote controller key: 1C 5 1 0
[ 762.387586] dib0700: Unknown remote controller key: 1C 5 1 0
[ 762.751563] dib0700: Unknown remote controller key: 1C 6 0 0
[ 762.855557] dib0700: Unknown remote controller key: 1C 6 0 0
[ 762.959548] dib0700: Unknown remote controller key: 1C 6 0 0
[ 763.271528] dib0700: Unknown remote controller key: 1C 12 1 0
[ 763.427605] dib0700: Unknown remote controller key: 1C 12 1 0
[ 763.531514] dib0700: Unknown remote controller key: 1C 12 1 0
[ 763.739497] dib0700: Unknown remote controller key: 1C 6 0 0
[ 763.843490] dib0700: Unknown remote controller key: 1C 6 0 0
[ 763.947483] dib0700: Unknown remote controller key: 1C 6 0 0
[ 764.207467] dib0700: Unknown remote controller key: 1C 5 1 0
[ 764.311459] dib0700: Unknown remote controller key: 1C 5 1 0
[ 765.351391] dib0700: Unknown remote controller key: 1C 20 0 0
[ 765.455384] dib0700: Unknown remote controller key: 1C 20 0 0
[ 765.559380] dib0700: Unknown remote controller key: 1C 20 0 0
[ 765.975350] dib0700: Unknown remote controller key: 1C 21 1 0
[ 766.079343] dib0700: Unknown remote controller key: 1C 21 1 0
[ 766.183336] dib0700: Unknown remote controller key: 1C 21 1 0
[ 767.171272] dib0700: Unknown remote controller key: 1C 11 0 0
[ 767.275264] dib0700: Unknown remote controller key: 1C 11 0 0
[ 767.379257] dib0700: Unknown remote controller key: 1C 11 0 0
[ 767.587245] dib0700: Unknown remote controller key: 1C 10 1 0
[ 767.691238] dib0700: Unknown remote controller key: 1C 10 1 0
[ 767.795230] dib0700: Unknown remote controller key: 1C 10 1 0
[ 768.783165] dib0700: Unknown remote controller key: 1C 14 0 0
[ 768.887160] dib0700: Unknown remote controller key: 1C 14 0 0
[ 768.991151] dib0700: Unknown remote controller key: 1C 14 0 0
[ 769.563116] dib0700: Unknown remote controller key: 1C 15 1 0
[ 769.667107] dib0700: Unknown remote controller key: 1C 15 1 0
[ 769.771100] dib0700: Unknown remote controller key: 1C 15 1 0
[ 770.135076] dib0700: Unknown remote controller key: 1C 17 0 0
[ 770.239069] dib0700: Unknown remote controller key: 1C 17 0 0
[ 771.330998] dib0700: Unknown remote controller key: 1C 8 1 0
[ 771.434990] dib0700: Unknown remote controller key: 1C 8 1 0
[ 771.538983] dib0700: Unknown remote controller key: 1C 8 1 0
[ 771.694973] dib0700: Unknown remote controller key: 1C 5 0 0
[ 771.798966] dib0700: Unknown remote controller key: 1C 5 0 0
[ 772.006944] dib0700: Unknown remote controller key: 1C 4 1 0
[ 772.162943] dib0700: Unknown remote controller key: 1C 4 1 0
[ 772.370929] dib0700: Unknown remote controller key: 1C 7 0 0
[ 815.356151] [UFW BLOCK] IN=ppp0 OUT= MAC= SRC=83.93.23.240 DST=85.78.216.209 LEN=90 TOS=0x00 PREC=0x00 TTL=118 ID=25889 PROTO=UDP SPT=12375 DPT=37979 LEN=70 MARK=0x14
Mitäs nyt?
-
Mitäs nyt?
Ajuri ei tunnista kaukosäätimen koodeja, eli ajuriversio on luultavasti liian vanha. Kokeile seuraavaksi sitä yaVDR:n pakettia.
-
Ehin jo asentaa sen v4l.n
-
Ehin jo asentaa sen v4l.n
Käynnistitkö koneen uudelleen?
-
en ::) reboot!!
-
Ei vaikutusta... cat /dev/input/event2 ei herjannu enää "lupa evätty" mutta siis ruudulla ei mitään kun painelee kaken nappuloita.
-
Ei vaikutusta... cat /dev/input/event2 ei herjannu enää "lupa evätty" mutta siis ruudulla ei mitään kun painelee kaken nappuloita.
Entäpä dmesg? Oliko event2 oikea laite?
-
cat /proc/bus/input/devices
I: Bus=0003 Vendor=2040 Product=7070 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:02.1-4/ir0
S: Sysfs=/devices/pci0000:00/0000:00:02.1/usb1/1-4/input/input2
U: Uniq=
H: Handlers=kbd event2
B: EV=3
B: KEY=14afc336 294284f 0 0 0 4 80158000 2190 40000801 9e96c0 0 900240 10004ffc
dmesg
[ 22.904550] dib0700: loaded with support for 14 different device-types
[ 22.907145] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
[ 22.907877] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 22.907930] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 22.908130] DVB: registering new adapter (Hauppauge Nova-T Stick)
[ 22.945455] HDA Intel 0000:00:07.0: PCI->APIC IRQ transform: INT B -> IRQ 34
[ 22.945459] hda_intel: Disable MSI for Nvidia chipset
[ 22.945483] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 23.137049] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[ 23.356007] DiB0070: successfully identified
[ 23.356073] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-4/input/input2
[ 23.356117] dvb-usb: schedule remote query interval to 50 msecs.
[ 23.356120] dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
[ 23.360111] usbcore: registered new interface driver dvb_usb_dib0700
[ 23.568005] hda_codec: ALC888: BIOS auto-probing.
[ 23.852396] nvidia 0000:04:00.0: PCI->APIC IRQ transform: INT A -> IRQ 34
[ 23.852396] nvidia 0000:04:00.0: setting latency timer to 64
[ 23.852396] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 23.852429] NVRM: loading NVIDIA UNIX x86 Kernel Module 270.18 Tue Jan 18 21:44:45 PST 2011
[ 24.228028] EXT3-fs (sdb2): using internal journal
[ 280.749816] type=1400 audit(1296836012.712:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1055 comm="apparmor_parser"
[ 280.750090] type=1400 audit(1296836012.712:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1055 comm="apparmor_parser"
[ 280.972913] ppdev: user-space parallel port driver
[ 281.012785] parport_pc 00:07: reported by Plug and Play BIOS
[ 281.012829] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 281.081522] type=1400 audit(1296836013.044:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1082 comm="apparmor_parser"
[ 281.081747] type=1400 audit(1296836013.044:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1083 comm="apparmor_parser"
[ 281.081958] type=1400 audit(1296836013.044:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1083 comm="apparmor_parser"
[ 281.082078] type=1400 audit(1296836013.044:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1083 comm="apparmor_parser"
[ 281.085482] type=1400 audit(1296836013.048:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1086 comm="apparmor_parser"
[ 281.088248] type=1400 audit(1296836013.052:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1087 comm="apparmor_parser"
[ 281.088532] type=1400 audit(1296836013.052:14): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1087 comm="apparmor_parser"
[ 281.088743] type=1400 audit(1296836013.052:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1084 comm="apparmor_parser"
[ 281.108155] lp0: using parport0 (interrupt-driven).
[ 282.257354] r8169 0000:03:00.0: eth0: link down
[ 282.257519] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 282.595736] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 282.595739] vboxdrv: Successfully done.
[ 282.595741] vboxdrv: Found 2 processor cores.
[ 282.596152] vboxdrv: fAsync=1 offMin=0x57d6d2 offMax=0x57d6d2
[ 282.596558] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 282.596560] vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001).
[ 283.230662] usb 1-2: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[ 284.004764] NVRM: failed to register with the ACPI subsystem!
[ 298.835223] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 298.979856] ISOFS: changing to secondary root
[ 313.019245] Netfilter messages via NETLINK v0.30.
[ 326.288534] NVRM: failed to unregister from the ACPI subsystem!
[ 326.344290] NVRM: failed to register with the ACPI subsystem!
[ 394.930012] dib0700: Unknown remote controller key: 1C 1 0 0
[ 395.034006] dib0700: Unknown remote controller key: 1C 1 0 0
[ 395.138001] dib0700: Unknown remote controller key: 1C 1 0 0
[ 395.501980] dib0700: Unknown remote controller key: 1C 2 1 0
[ 395.605975] dib0700: Unknown remote controller key: 1C 2 1 0
[ 395.709971] dib0700: Unknown remote controller key: 1C 2 1 0
[ 395.917958] dib0700: Unknown remote controller key: 1C 3 0 0
[ 396.021952] dib0700: Unknown remote controller key: 1C 3 0 0
[ 396.125946] dib0700: Unknown remote controller key: 1C 3 0 0
[ 396.281940] dib0700: Unknown remote controller key: 1C 6 1 0
[ 396.437929] dib0700: Unknown remote controller key: 1C 6 1 0
[ 396.697915] dib0700: Unknown remote controller key: 1C 6 0 0
[ 396.801910] dib0700: Unknown remote controller key: 1C 6 0 0
[ 396.957901] dib0700: Unknown remote controller key: 1C 6 0 0
[ 397.165890] dib0700: Unknown remote controller key: 1C 8 1 0
[ 397.321881] dib0700: Unknown remote controller key: 1C 8 0 0
[ 397.633864] dib0700: Unknown remote controller key: 1C 21 1 0
[ 397.789852] dib0700: Unknown remote controller key: 1C 21 1 0
[ 397.893850] dib0700: Unknown remote controller key: 1C 21 1 0
[ 398.049842] dib0700: Unknown remote controller key: 1C 20 0 0
[ 398.205832] dib0700: Unknown remote controller key: 1C 20 0 0
[ 398.413821] dib0700: Unknown remote controller key: 1C 21 1 0
[ 398.517815] dib0700: Unknown remote controller key: 1C 21 1 0
[ 398.725844] dib0700: Unknown remote controller key: 1C 20 0 0
[ 398.829798] dib0700: Unknown remote controller key: 1C 20 0 0
[ 399.193778] dib0700: Unknown remote controller key: 1C 17 1 0
[ 399.297774] dib0700: Unknown remote controller key: 1C 17 1 0
[ 399.401767] dib0700: Unknown remote controller key: 1C 17 1 0
[ 400.077730] dib0700: Unknown remote controller key: 1C 25 1 0
[ 400.233722] dib0700: Unknown remote controller key: 1C 14 0 0
[ 400.337716] dib0700: Unknown remote controller key: 1C 14 0 0
[ 400.753693] dib0700: Unknown remote controller key: 1C 17 1 0
[ 401.117674] dib0700: Unknown remote controller key: 1C 17 0 0
[ 401.325662] dib0700: Unknown remote controller key: 1C 17 1 0
[ 402.365605] dib0700: Unknown remote controller key: 1C 11 0 0
[ 402.469599] dib0700: Unknown remote controller key: 1C 11 0 0
[ 402.677581] dib0700: Unknown remote controller key: 1C 10 1 0
[ 402.781585] dib0700: Unknown remote controller key: 1C 10 1 0
[ 403.353551] dib0700: Unknown remote controller key: 1C 6 1 0
[ 403.457545] dib0700: Unknown remote controller key: 1C 6 1 0
[ 403.665534] dib0700: Unknown remote controller key: 1C 9 0 0
[ 403.821525] dib0700: Unknown remote controller key: 1C 9 0 0
[ 403.977517] dib0700: Unknown remote controller key: 1C 5 1 0
[ 404.081511] dib0700: Unknown remote controller key: 1C 5 1 0
[ 404.289499] dib0700: Unknown remote controller key: 1C 2 0 0
[ 404.549485] dib0700: Unknown remote controller key: 1C 6 1 0
[ 404.653479] dib0700: Unknown remote controller key: 1C 6 1 0
[ 404.965462] dib0700: Unknown remote controller key: 1C 5 1 0
[ 405.069457] dib0700: Unknown remote controller key: 1C 6 0 0
[ 405.225448] dib0700: Unknown remote controller key: 1C 6 1 0
[ 405.381441] dib0700: Unknown remote controller key: 1C 9 1 0
[ 405.485434] dib0700: Unknown remote controller key: 1C 9 1 0
[ 405.797418] dib0700: Unknown remote controller key: 1C 5 0 0
[ 438.659618] dib0700: Unknown remote controller key: 1C 5 1 0
[ 438.763612] dib0700: Unknown remote controller key: 1C 5 1 0
[ 438.867606] dib0700: Unknown remote controller key: 1C 5 1 0
[ 439.127599] dib0700: Unknown remote controller key: 1C 6 0 0
[ 439.231575] dib0700: Unknown remote controller key: 1C 6 0 0
[ 439.335581] dib0700: Unknown remote controller key: 1C 6 0 0
[ 439.595709] dib0700: Unknown remote controller key: 1C 12 1 0
[ 439.699574] dib0700: Unknown remote controller key: 1C 12 1 0
[ 439.803555] dib0700: Unknown remote controller key: 1C 12 1 0
[ 440.011544] dib0700: Unknown remote controller key: 1C 6 0 0
[ 440.115538] dib0700: Unknown remote controller key: 1C 6 0 0
[ 440.479518] dib0700: Unknown remote controller key: 1C 5 1 0
[ 440.583513] dib0700: Unknown remote controller key: 1C 5 1 0
[ 440.947493] dib0700: Unknown remote controller key: 1C 2 0 0
[ 441.103484] dib0700: Unknown remote controller key: 1C 2 0 0
[ 441.259481] dib0700: Unknown remote controller key: 1C 2 1 0
[ 441.415468] dib0700: Unknown remote controller key: 1C 2 0 0
[ 441.571459] dib0700: Unknown remote controller key: 1C 6 1 0
[ 441.675453] dib0700: Unknown remote controller key: 1C 6 0 0
[ 441.883441] dib0700: Unknown remote controller key: 1C 5 1 0
[ 441.987436] dib0700: Unknown remote controller key: 1C 5 1 0
[ 442.143427] dib0700: Unknown remote controller key: 1C 5 0 0
[ 442.299412] dib0700: Unknown remote controller key: 1C 5 0 0
[ 442.455410] dib0700: Unknown remote controller key: 1C 5 1 0
[ 442.559404] dib0700: Unknown remote controller key: 1C 5 1 0
[ 442.715396] dib0700: Unknown remote controller key: 1C 5 0 0
[ 442.819390] dib0700: Unknown remote controller key: 1C 5 0 0
[ 442.975382] dib0700: Unknown remote controller key: 1C 8 1 0
[ 443.079377] dib0700: Unknown remote controller key: 1C 8 1 0
[ 443.287366] dib0700: Unknown remote controller key: 1C 8 0 0
[ 443.391361] dib0700: Unknown remote controller key: 1C 8 0 0
[ 443.547353] dib0700: Unknown remote controller key: 1C 8 1 0
[ 443.651346] dib0700: Unknown remote controller key: 1C 8 1 0
[ 455.818679] dib0700: Unknown remote controller key: 1C 14 0 0
[ 455.922673] dib0700: Unknown remote controller key: 1C 14 0 0
[ 456.026668] dib0700: Unknown remote controller key: 1C 14 0 0
[ 456.130662] dib0700: Unknown remote controller key: 1C 14 0 0
[ 456.546638] dib0700: Unknown remote controller key: 1C 14 1 0
[ 456.650633] dib0700: Unknown remote controller key: 1C 14 1 0
[ 456.806625] dib0700: Unknown remote controller key: 1C 14 1 0
[ 457.066611] dib0700: Unknown remote controller key: 1C 14 0 0
[ 457.170605] dib0700: Unknown remote controller key: 1C 14 0 0
[ 457.482588] dib0700: Unknown remote controller key: 1C 14 1 0
[ 457.586583] dib0700: Unknown remote controller key: 1C 14 1 0
[ 457.742565] dib0700: Unknown remote controller key: 1C 14 1 0
[ 457.846568] dib0700: Unknown remote controller key: 1C 14 1 0
[ 457.950562] dib0700: Unknown remote controller key: 1C 14 1 0
[ 458.210548] dib0700: Unknown remote controller key: 1C 14 0 0
[ 458.314542] dib0700: Unknown remote controller key: 1C 14 0 0
[ 458.574526] dib0700: Unknown remote controller key: 1C 14 1 0
[ 458.678522] dib0700: Unknown remote controller key: 1C 14 1 0
[ 458.886511] dib0700: Unknown remote controller key: 1C 14 0 0
[ 458.990505] dib0700: Unknown remote controller key: 1C 14 0 0
[ 459.146497] dib0700: Unknown remote controller key: 1C 14 1 0
[ 459.250491] dib0700: Unknown remote controller key: 1C 14 1 0
[ 459.458480] dib0700: Unknown remote controller key: 1C 14 0 0
[ 459.718466] dib0700: Unknown remote controller key: 1C 14 1 0
[ 461.226383] dib0700: Unknown remote controller key: 1C 15 0 0
[ 461.330377] dib0700: Unknown remote controller key: 1C 15 0 0
[ 461.486375] dib0700: Unknown remote controller key: 1C 15 0 0
[ 461.798352] dib0700: Unknown remote controller key: 1C 16 0 0
[ 461.902346] dib0700: Unknown remote controller key: 1C 16 0 0
[ 462.422317] dib0700: Unknown remote controller key: 1C 20 1 0
[ 462.526312] dib0700: Unknown remote controller key: 1C 20 1 0
[ 462.630302] dib0700: Unknown remote controller key: 1C 20 1 0
[ 462.838295] dib0700: Unknown remote controller key: 1C 21 0 0
[ 462.942289] dib0700: Unknown remote controller key: 1C 21 0 0
[ 463.098281] dib0700: Unknown remote controller key: 1C 21 1 0
[ 463.254272] dib0700: Unknown remote controller key: 1C 21 1 0
[ 463.358267] dib0700: Unknown remote controller key: 1C 21 0 0
[ 463.462262] dib0700: Unknown remote controller key: 1C 21 0 0
[ 463.618246] dib0700: Unknown remote controller key: 1C 21 1 0
[ 463.722665] dib0700: Unknown remote controller key: 1C 21 1 0
[ 463.878238] dib0700: Unknown remote controller key: 1C 21 1 0
[ 463.982233] dib0700: Unknown remote controller key: 1C 21 1 0
[ 466.439941] lo: Disabled Privacy Extensions
-
Kokeilepa tällaista:
sudo service vdr stop
sudo modprobe -r dvb_usb_dib0700
sudo modprobe dvb_usb_dib0700 dvb_usb_dib0700_ir_proto=0
Testaa sitten kaukosäädintä. Jos herjaa edelleen samaa dmesgissä, vaihda parametrin arvoa:
sudo modprobe -r dvb_usb_dib0700
sudo modprobe dvb_usb_dib0700 dvb_usb_dib0700_ir_proto=1
Jos ei vieläkään toimi, kokeile vielä arvolla 2:
sudo modprobe -r dvb_usb_dib0700
sudo modprobe dvb_usb_dib0700 dvb_usb_dib0700_ir_proto=2
-
Kokasin kaikki 3
sudo cat /dev/input/event2 (ruudulla ei mitään ja nyt taas pakko sudottaa)
dmesg
[ 1338.626150] dib0700: Unknown remote controller key: 1C 8 1 0
[ 1339.146146] dib0700: Unknown remote controller key: 1C 2 0 0
[ 1346.935715] usbcore: deregistering interface driver dvb_usb_dib0700
[ 1346.960137] dvb-usb: Hauppauge Nova-T Stick successfully deinitialized and disconnected.
[ 1353.942776] dib0700: loaded with support for 14 different device-types
[ 1353.942819] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
[ 1353.942819] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 1353.942819] DVB: registering new adapter (Hauppauge Nova-T Stick)
[ 1354.157931] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[ 1354.373926] DiB0070: successfully identified
[ 1354.374000] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-4/input/input5
[ 1354.374069] dvb-usb: schedule remote query interval to 50 msecs.
[ 1354.374071] dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
[ 1354.374130] usbcore: registered new interface driver dvb_usb_dib0700
-
Ei näy herjaa ainakaan tuon viimeisen latauksen jälkeen. Huomaa että siinä on taas laite vaihtunut event5:ksi.
-
umm.. kyllä se 2 pitäs olla
I: Bus=0003 Vendor=2040 Product=7070 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:02.1-4/ir0
S: Sysfs=/devices/pci0000:00/0000:00:02.1/usb1/1-4/input/input5
U: Uniq=
H: Handlers=kbd event2
B: EV=3
B: KEY=14afc336 294284f 0 0 0 4 80158000 2190 40000801 9e96c0 0 900240 10004ffc
tv@Masiina:~$ cat /dev/input/event5
cat: /dev/input/event5: Tiedostoa tai hakemistoa ei ole
-
hahaa mitäköhän tehtiin kun NUM-PAD toimii kummallisesti.. joku niistä 3.sta komento kokeilusta?
sudo modprobe -r dvb_usb_dib0700
sudo modprobe dvb_usb_dib0700 dvb_usb_dib0700_ir_proto=0
Tällä palasi NUM-PAD normiksi
sudo modprobe dvb_usb_dib0700 dvb_usb_dib0700_ir_proto=1
-
Ei taida onnistua kaukkarin säätö... :'(
No ei se mitään, en tosin googlestakaan löytänyt onnistuneita keissejä, ainakaan kyseisellä kaukosäätimellä/tikulla.
Kiitos paljon vaivannäöstä ja ajastasi nm ! :)
(kattelen välillä tätä palstaa, jos olis ilmestynyt tricksejä)
-
Kannattaa kysyä linuxtv.fi:n (http://www.linuxtv.fi/) laitteistoalueella. Siellä voi jollain olla kokemuksia.