Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Asentaminen ja käyttöönotto => Aiheen aloitti: Tintti - 08.05.06 - klo:19.49
-
En saa asennetuksi päivityksiä rikkinäisen paketin takia, saan vain seuraavan virhe ilmoituksen:
Software index is broken
It is impossible to install or remove any software. Please use the package manager "Synaptic" or run "sudo apt-get install -f" in a terminal to fix this issue at first.
Kun koetan korjata synaptic package managerista saan seuraavan virheilmoituksen:
E: /var/cache/apt/archives/lilypond_2.6.3-9~breezy1_i386.deb: subprocess pre-installation script returned error exit status 1
Myöskään sudo apt-get install -f ei onnistu.
Koetin poistaa rikkinäisen ohjelman synapticista eikä sekään onnistunut. Sain seuraavan ilmoituksen:
E: lilypond-data: subprocess post-installation script returned error exit status 1
Mikä on vialla?
Tuo ilmoitus tulee aina kun asennan tai poistan ohjelmia.
-
En saa asennetuksi päivityksiä rikkinäisen paketin takia, saan vain seuraavan virhe ilmoituksen:
...
Mikä on vialla?
Pitää olla aika varovainen tiedostolähteiden kanssa.
Vinkit ongelmaratkaisemiseksi löytyy Windowsista Linuxiin ABC -sivuilta:
http://tapsa.terae.net/linux/knoppix/hdd-install.htm#dpkg-deb
(Sivu käsitteleen vanhan Knoppixin kiintolevyasennusta, mutta se on sovellettavissa enemmän tai vähemmän suoraa Ubuntuun).
http://packages.ubuntu.com/cgi-bin/search_packages.pl?keywords=lilypond&searchon=names&subword=1&version=breezy&release=all
-
Ei onnistunut. Erroria tulee edelleen.
-
Ei onnistunut. Erroria tulee edelleen.
Pientä täsmällisyyttä, pyydän. Mitä noista Tapsan sivuilla tarjotuista komennoista koitit ja mitkä olivat tarkat virheilmoitukset.
Asennan juuri lilypond:ia Dapperiin. Tuntuu uppoavan aivan kauniisti. (Ohjelma ainakin asentui).
Jos homma ei onnistu annettujen ohjeiden avulla - pitänee ottaa käyttöön epätoivoinen suunnitelma B.
Mutta pistä pyydetyt tiedot, niin voimme ainakin alkaa arvailemaan, millainen olisi suunnitelmaa B.
-
-Tapsan sivujen mukaan
yritin päätteellä apt-get -f install
Luetaan pakettiluetteloita... Valmis
Muodostetaan riippuvuussuhteiden puu... Valmis
Seuraavat paketit POISTETAAN:
lilypond-data
0 päivitetty, 0 uutta asennusta, 1 poistettavaa ja 0 päivittämätöntä.
1 ei asennettu kokonaan tai poistettiin.
Noudettavaa arkistoa 0t.
Purkamisen jälkeen vapautuu 15,4Mt levytilaa.
Haluatko jatkaa [K/e]? k
(Reading database ... 80332 files and directories currently installed.)
Removing lilypond-data ...
/var/lib/dpkg/info/lilypond-data.postrm: line 23: /usr/bin/kpsewhich: Tiedostoa tai hakemistoa ei ole
dpkg: error processing lilypond-data (--remove):
subprocess post-removal script returned error exit status 1
Errors were encountered while processing:
lilypond-data
E: Sub-process /usr/bin/dpkg returned an error code (1)
-Sitten: ...asenna paketti seuraavasti:
cd /var/cache/apt/archives
dpkg -i --force-overwrite libsm6_4.3.0.dfsg.1-4_i386.deb
tiina@b-215-165:/var/cache/apt/archives$ sudo dpkg -i --force-overwrite libsm6_4.3.0.dfsg.1-4_i386.deb
dpkg: error processing libsm6_4.3.0.dfsg.1-4_i386.deb (--install):
cannot access archive: Tiedostoa tai hakemistoa ei ole
Errors were encountered while processing:
libsm6_4.3.0.dfsg.1-4_i386.deb
tiina@b-215-165:/var/cache/apt/archives$
-Sitten yritin poistaa
dpkg --purge libsm6
Siitä seurasi:
tiina@b-215-165:/var/cache/apt/archives$ sudo dpkg --purge libsm6
dpkg: dependency problems prevent removal of libsm6:
oclock depends on libsm6.
libxt6 depends on libsm6.
xclock depends on libsm6.
beforelight depends on libsm6.
xfd depends on libsm6.
k3b depends on libsm6.
nautilus-sendto depends on libsm6.
xkbutils depends on libsm6.
libwnck18 depends on libsm6.
python2.4-gnome2 depends on libsm6.
xprop depends on libsm6.
k3b-mp3 depends on libsm6.
editres depends on libsm6.
openoffice.org2-core depends on libsm6.
gnome-applets depends on libsm6.
gnome-spell depends on libsm6.
gnomemeeting depends on libsm6; however:
Package libsm6 is to be removed.
xbiff depends on libsm6.
zenity depends on libsm6.
mozilla-mplayer depends on libsm6.
libgtkhtml3.8-15 depends on libsm6.
xfontsel depends on libsm6.
xscreensaver-gl depends on libsm6.
xload depends on libsm6.
libgucharmap4 depends on libsm6.
gnome-system-tools depends on libsm6.
gstreamer0.8-misc depends on libsm6.
evolution depends on libsm6; however:
Package libsm6 is to be removed.
gthumb depends on libsm6.
xscreensaver depends on libsm6.
vino depends on libsm6; however:
Package libsm6 is to be removed.
rss-glx depends on libsm6.
gv depends on libsm6 | xlibs (>> 4.1.0); however:
Package libsm6 is to be removed.
Package xlibs is not installed.
gnome-utils depends on libsm6.
xvncviewer depends on libsm6.
libpolyp0 depends on libsm6.
libgnomecupsui1.0-1 depends on libsm6.
firefox-gnome-support depends on libsm6.
xsetroot depends on libsm6.
evolution-plugins depends on libsm6.
xwininfo depends on libsm6.
smproxy depends on libsm6.
nautilus depends on libsm6; however:
Package libsm6 is to be removed.
xgc depends on libsm6.
xsm depends on libsm6.
gucharmap depends on libsm6; however:
Package libsm6 is to be removed.
xrdb depends on libsm6.
xauth depends on libsm6.
libstartup-notification0 depends on libsm6 | xlibs (>> 4.1.0); however:
Package libsm6 is to be removed.
Package xlibs is not installed.
python2.4-gnome2-extras depends on libsm6; however:
Package libsm6 is to be removed.
evolution-exchange depends on libsm6; however:
Package libsm6 is to be removed.
libxaw7 depends on libsm6.
kcontrol depends on libsm6.
libxmu6 depends on libsm6.
update-notifier depends on libsm6.
libedataserverui1.2-6 depends on libsm6.
file-roller depends on libsm6.
kdelibs-bin depends on libsm6.
gnome-volume-manager depends on libsm6.
gnome-session depends on libsm6; however:
Package libsm6 is to be removed.
xaw3dg depends on libsm6.
xconsole depends on libsm6.
libeel2-2 depends on libsm6.
xtrap depends on libsm6.
gaim depends on libsm6.
evince depends on libsm6; however:
Package libsm6 is to be removed.
xwd depends on libsm6.
libmetacity0 depends on libsm6.
xmessage depends on libsm6.
gcalctool depends on libsm6; however:
Package libsm6 is to be removed.
gnome-control-center depends on libsm6; however:
Package libsm6 is to be removed.
gnome-netstatus-applet depends on libsm6; however:
Package libsm6 is to be removed.
bitmap depends on libsm6.
gnome-media depends on libsm6; however:
Package libsm6 is to be removed.
xditview depends on libsm6.
gnome-pilot depends on libsm6; however:
Package libsm6 is to be removed.
xpmutils depends on libsm6.
libxtrap6 depends on libsm6.
xmag depends on libsm6.
xman depends on libsm6.
libgnome-desktop-2 depends on libsm6.
libarts1c2 depends on libsm6; however:
Package libsm6 is to be removed.
libsm-dev depends on libsm6 (= 1:6.0.4-4).
listres depends on libsm6.
gnome-cups-manager depends on libsm6.
xstdcmap depends on libsm6.
totem-gstreamer depends on libsm6; however:
Package libsm6 is to be removed.
xvidtune depends on libsm6.
rhythmbox depends on libsm6; however:
Package libsm6 is to be removed.
libpanel-applet2-0 depends on libsm6.
gstreamer0.8-x depends on libsm6.
dbus depends on libsm6.
libmagick6 depends on libsm6.
libgnome2-perl depends on libsm6; however:
Package libsm6 is to be removed.
xterm depends on libsm6.
gnomebaker depends on libsm6.
gtkhtml3.8 depends on libsm6.
valknut depends on libsm6.
xmore depends on libsm6.
galeon depends on libsm6; however:
Package libsm6 is to be removed.
xkill depends on libsm6.
sound-juicer depends on libsm6.
libgnomeui-0 depends on libsm6; however:
Package libsm6 is to be removed.
xlogo depends on libsm6.
xclipboard depends on libsm6.
libexchange-storage1.2-0 depends on libsm6.
xine-ui depends on libsm6.
k3blibs depends on libsm6.
xlsclients depends on libsm6.
xlsatoms depends on libsm6.
xmms depends on libsm6.
kdebase-bin depends on libsm6.
libqt3-mt depends on libsm6.
viewres depends on libsm6.
timidity depends on libsm6; however:
Package libsm6 is to be removed.
kdelibs4c2 depends on libsm6.
imlib1 depends on libsm6.
x11perf depends on libsm6.
nautilus-cd-burner depends on libsm6.
metacity depends on libsm6.
gconf-editor depends on libsm6; however:
Package libsm6 is to be removed.
gnome-system-monitor depends on libsm6.
eog depends on libsm6.
xcalc depends on libsm6.
appres depends on libsm6.
xeyes depends on libsm6.
xscreensaver-data depends on libsm6.
firestarter depends on libsm6 | xlibs (>> 4.1.0); however:
Package libsm6 is to be removed.
Package xlibs is not installed.
gdm depends on libsm6; however:
Package libsm6 is to be removed.
xset depends on libsm6.
gimp depends on libsm6.
libbonoboui2-0 depends on libsm6.
dpkg: error processing libsm6 (--purge):
dependency problems - not removing
Errors were encountered while processing:
libsm6
tiina@b-215-165:/var/cache/apt/archives$
Vielä koetin sudo dpkg -r lilypond-data
tiina@b-215-165:~$ sudo dpkg -r lilypond-data
(Reading database ... 80332 files and directories currently installed.)
Removing lilypond-data ...
/var/lib/dpkg/info/lilypond-data.postrm: line 23: /usr/bin/kpsewhich: Tiedostoa tai hakemistoa ei ole
dpkg: error processing lilypond-data (--remove):
subprocess post-removal script returned error exit status 1
Errors were encountered while processing:
lilypond-data
tiina@b-215-165:~$
Että silleen. Tuli aika litania, liekkö joku konsti jäänyt sitten koettamatta.
-
Aloitetaan ihan alusta, tuo lilypondin poistoskripti valittaa tiedoston /usr/bin/kpsewhich puuttumisesta, tee sellainen.
sudo nano /usr/bin/kpsewhich kirjoita siihen vaikka oma nimesi ja tallenna (ctrl+o ja ctrl+x). Sitten koitat vaikka uudelleen sen paketin poistoa (dpkg -r komento). Toinen mahdollinen lähestymistapa on poistaa paketinhallintaohjelman välivarastosta alkuperäinen paketti sudo rm /var/cache/apt/archives/lilypond_2.6.3-9~breezy1_i386.deb ja sitten asentaa se uudelleen sudo apt-get install --reinstall lilypond jos alkup. paketti oli jotenkin viallinen.
Tuo annettu ohje oli esimerkkitapaus, sinun ei olisi pitänyt yrittää poistaa pakettia libsm6, vaan kaikki operaatiot tulisi kohdistaa pakettiin lilypond.
-
Tein kanniston ohjeiden mukaan sudo nano /usr/bin/kpsewhich ja tallensin sen. Tämän jälkeen koetin poistaa sitä:
tiina@b-215-165:~$ sudo dpkg -r lilypond-data
dpkg: status database area is locked by another process
tiina@b-215-165:~$ sudo dpkg -r lilypond-data
dpkg: error processing lilypond-data (--remove):
Package is in a very bad inconsistent state - you should
reinstall it before attempting a removal.
Errors were encountered while processing:
lilypond-data
Sitten yritin sitä välivarastosta poistoa
tiina@b-215-165:~$ sudo rm /var/cache/apt/archives/lilypond_2.6.3-9~breezy1_i38 6.deb
Minkä jälkeen yritin asentaa uudelleen:
tiina@b-215-165:~$ sudo apt-get install --reinstall lilypond
Luetaan pakettiluetteloita... Valmis
Muodostetaan riippuvuussuhteiden puu... Valmis
Suositellut paketit:
lilypond-doc
Seuraavat UUDET paketit asennetaan:
lilypond
0 päivitetty, 1 uutta asennusta, 0 poistettavaa ja 0 päivittämätöntä.
2 ei asennettu kokonaan tai poistettiin.
Noudettavaa arkistoa 1129kt/5865kt.
Purkamisen jälkeen käytetään 2974kt lisää levytilaa.
Nouda:1 http://archive.ubuntu.com breezy-backports/universe lilypond 2.6.3-9~br eezy1 [1129kB]
Noudettiin 1129kt ajassa 7s (158kt/s)
Esiräätälöidään paketteja...
Selecting previously deselected package lilypond-data.
(Reading database ... 80333 files and directories currently installed.)
Preparing to replace lilypond-data 2.6.3-9~breezy1 (using .../lilypond-data_2.6 .3-9~breezy1_all.deb) ...
Unpacking replacement lilypond-data ...
/var/lib/dpkg/info/lilypond-data.postrm: line 23: /usr/bin/kpsewhich: Lupa evät ty
dpkg: warning - old post-removal script returned error exit status 1
dpkg - trying script from the new package instead ...
/var/lib/dpkg/tmp.ci/postrm: line 23: /usr/bin/kpsewhich: Lupa evätty
dpkg: error processing /var/cache/apt/archives/lilypond-data_2.6.3-9~breezy1_al l.deb (--unpack):
subprocess new post-removal script returned error exit status 1
/var/lib/dpkg/tmp.ci/postrm: line 23: /usr/bin/kpsewhich: Lupa evätty
dpkg: error while cleaning up:
subprocess post-removal script returned error exit status 1
Unpacking lilypond (from .../lilypond_2.6.3-9~breezy1_i386.deb) ...
/var/lib/dpkg/tmp.ci/preinst: line 19: /usr/bin/kpsewhich: Lupa evätty
dpkg: error processing /var/cache/apt/archives/lilypond_2.6.3-9~breezy1_i386.de b (--unpack):
subprocess pre-installation script returned error exit status 1
Errors were encountered while processing:
/var/cache/apt/archives/lilypond-data_2.6.3-9~breezy1_all.deb
/var/cache/apt/archives/lilypond_2.6.3-9~breezy1_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Erroria jälleen :)
-
Jaahas meni ilmeisesti oikeudet jotenkin solmuun, poista se tiedosto mitä aikaisemmin käskin sörkkimään,
sudo rm /usr/bin/kpsewhich ja aja sudo apt-get install --reinstall lilypond loitsu uudelleen.
-
Kanniston ohjeen mukaan:
tiina@b-215-165:~$ sudo rm /usr/bin/kpsewhich
Password:
tiina@b-215-165:~$ sudo apt-get install --reinstall lilypond
Luetaan pakettiluetteloita... Valmis
Muodostetaan riippuvuussuhteiden puu... Valmis
Suositellut paketit:
lilypond-doc
Seuraavat UUDET paketit asennetaan:
lilypond
0 päivitetty, 1 uutta asennusta, 0 poistettavaa ja 0 päivittämätöntä.
2 ei asennettu kokonaan tai poistettiin.
Noudettavaa arkistoa 0t/5865kt.
Purkamisen jälkeen käytetään 2974kt lisää levytilaa.
Esiräätälöidään paketteja...
(Reading database ... 80333 files and directories currently installed.)
Preparing to replace lilypond-data 2.6.3-9~breezy1 (using .../lilypond-data_2.6.3-9~breezy1_all.deb) ...
Unpacking replacement lilypond-data ...
/var/lib/dpkg/info/lilypond-data.postrm: line 23: /usr/bin/kpsewhich: Tiedostoa tai hakemistoa ei ole
dpkg: warning - old post-removal script returned error exit status 1
dpkg - trying script from the new package instead ...
/var/lib/dpkg/tmp.ci/postrm: line 23: /usr/bin/kpsewhich: Tiedostoa tai hakemistoa ei ole
dpkg: error processing /var/cache/apt/archives/lilypond-data_2.6.3-9~breezy1_all.deb (--unpack):
subprocess new post-removal script returned error exit status 1
/var/lib/dpkg/tmp.ci/postrm: line 23: /usr/bin/kpsewhich: Tiedostoa tai hakemistoa ei ole
dpkg: error while cleaning up:
subprocess post-removal script returned error exit status 1
Unpacking lilypond (from .../lilypond_2.6.3-9~breezy1_i386.deb) ...
/var/lib/dpkg/tmp.ci/preinst: line 19: /usr/bin/kpsewhich: Tiedostoa tai hakemistoa ei ole
dpkg: error processing /var/cache/apt/archives/lilypond_2.6.3-9~breezy1_i386.deb (--unpack):
subprocess pre-installation script returned error exit status 1
Errors were encountered while processing:
/var/cache/apt/archives/lilypond-data_2.6.3-9~breezy1_all.deb
/var/cache/apt/archives/lilypond_2.6.3-9~breezy1_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
tiina@b-215-165:~$
Taitaa mennä Ubuntu uudelleen asennukseen. Silleen ongelma ainaskin ratkeaisi.
-
Ääh, ei nyt vielä asennella mitään uusiksi. Googlelta vastauksen sain, asenna paketti tetex-bin
sudo aptitude install tetex-bin ei se mitään asenna, mutta lataa sen kumminkin, sitten sörkit sitä dpkg;llä, eli sudo dpkg -i /var/cache/apt/archives/tetex-bin<PAINA_TÄSSÄ_TABULAATTORI_NÄPPÄINTÄ> Tän jälkeen pitäis onnistua.
-
tiina@b-215-165:~$ sudo aptitude install tetex-bin
Password:
Luetaan pakettiluetteloita... Valmis
Muodostetaan riippuvuussuhteiden puu... Valmis
Luen tilatietoja
Alustan pakettien tiloja... Valmis
Nämä UUDET paketit asennetaan automaattisesti:
libt1-5 libwww-ssl0 perl-tk psutils tetex-base tetex-doc texi2html
Nämä UUDET paketit asennetaan:
libt1-5 libwww-ssl0 perl-tk psutils tetex-base tetex-bin tetex-doc
texi2html
0 päivitettyä pakettia, 8 uutta asennusta, 0 poistettavaa ja 0 päivittämätöntä.
Tarvitsee noutaa 49,6MB/54,3MB arkistoista. Levytilaa kuluu 116MB purkamisen jäl keen.
Haluatko jatkaa? [Kyllä=y/ei=n/?] k
Virheellinen komento. Anna hyväksytty komento tai '?' saadaksesi apua.
Haluatko jatkaa? [Kyllä=y/ei=n/?] y
Kirjoitan tilatietoja... Valmis
Nouda:1 http://archive.ubuntu.com breezy/universe perl-tk 1:800.025-2 [2380kB]
Nouda:2 http://us.archive.ubuntu.com breezy/main tetex-base 2.0.2c-8 [14,4MB]
Nouda:3 http://security.ubuntu.com breezy-security/main libwww-ssl0 5.4.0-9ubunt u0.5.10 [448kB]
Nouda:4 http://security.ubuntu.com breezy-security/main tetex-bin 2.0.2-30ubuntu 3.5 [3885kB]
Nouda:5 http://us.archive.ubuntu.com breezy/main libt1-5 5.0.2-3 [141kB]
Nouda:6 http://us.archive.ubuntu.com breezy/main tetex-doc 2.0.2c-8 [28,2MB]
Nouda:7 http://us.archive.ubuntu.com breezy/main psutils 1.17-17 [81,3kB]
Nouda:8 http://us.archive.ubuntu.com breezy/main texi2html 1.66-1.2 [93,8kB]
Noudin 49,6MB ajassa 3m37s (228kB/s)
Esiräätälöidään paketteja...
(Reading database ... 80333 files and directories currently installed.)
Preparing to replace lilypond-data 2.6.3-9~breezy1 (using .../lilypond-data_2.6. 3-9~breezy1_all.deb) ...
Unpacking replacement lilypond-data ...
/var/lib/dpkg/info/lilypond-data.postrm: line 23: /usr/bin/kpsewhich: Tiedostoa tai hakemistoa ei ole
dpkg: warning - old post-removal script returned error exit status 1
dpkg - trying script from the new package instead ...
/var/lib/dpkg/tmp.ci/postrm: line 23: /usr/bin/kpsewhich: Tiedostoa tai hakemist oa ei ole
dpkg: error processing /var/cache/apt/archives/lilypond-data_2.6.3-9~breezy1_all .deb (--unpack):
subprocess new post-removal script returned error exit status 1
/var/lib/dpkg/tmp.ci/postrm: line 23: /usr/bin/kpsewhich: Tiedostoa tai hakemist oa ei ole
dpkg: error while cleaning up:
subprocess post-removal script returned error exit status 1
Selecting previously deselected package tetex-base.
Unpacking tetex-base (from .../tetex-base_2.0.2c-8_all.deb) ...
Selecting previously deselected package libt1-5.
Unpacking libt1-5 (from .../libt1-5_5.0.2-3_i386.deb) ...
Selecting previously deselected package libwww-ssl0.
Unpacking libwww-ssl0 (from .../libwww-ssl0_5.4.0-9ubuntu0.5.10_i386.deb) ...
Selecting previously deselected package tetex-bin.
Unpacking tetex-bin (from .../tetex-bin_2.0.2-30ubuntu3.5_i386.deb) ...
Selecting previously deselected package tetex-doc.
Unpacking tetex-doc (from .../tetex-doc_2.0.2c-8_all.deb) ...
Selecting previously deselected package perl-tk.
Unpacking perl-tk (from .../perl-tk_1%3a800.025-2_i386.deb) ...
Selecting previously deselected package psutils.
Unpacking psutils (from .../psutils_1.17-17_i386.deb) ...
Selecting previously deselected package texi2html.
Unpacking texi2html (from .../texi2html_1.66-1.2_all.deb) ...
Errors were encountered while processing:
/var/cache/apt/archives/lilypond-data_2.6.3-9~breezy1_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Oih! Jotain ikävää tapahtui asennuksessa. Yritän toipua:
Setting up libt1-5 (5.0.2-3) ...
Setting up texi2html (1.66-1.2) ...
Setting up tetex-base (2.0.2c-8) ...
Creating config file /etc/texmf/mktex.cnf with new version
Creating config file /etc/texmf/dvips/config.builtin35 with new version
Creating config file /etc/texmf/updmap.d/00updmap.cfg with new version
Creating config file /etc/texmf/dvipdfm/config with new version
Creating config file /etc/texdoctk/texdocrc with new version
Setting up libwww-ssl0 (5.4.0-9ubuntu0.5.10) ...
Setting up perl-tk (800.025-2) ...
Setting up amsn (0.94-1) ...
Setting up tetex-bin (2.0.2-30ubuntu3.5) ...
Creating config file /etc/texmf/texmf.d/05TeXMF.cnf with new version
Creating config file /etc/texmf/texmf.d/15Plain.cnf with new version
Creating config file /etc/texmf/texmf.d/45TeXinputs.cnf with new version
Creating config file /etc/texmf/texmf.d/55Fonts.cnf with new version
Creating config file /etc/texmf/texmf.d/65BibTeX.cnf with new version
Creating config file /etc/texmf/texmf.d/75DviPS.cnf with new version
Creating config file /etc/texmf/texmf.d/85Misc.cnf with new version
Creating config file /etc/texmf/texmf.d/90TeXDoc.cnf with new version
Creating config file /etc/texmf/texmf.d/95NonPath.cnf with new version
Generating /etc/texmf/texmf.cnf ...
Creating config file /etc/texmf/texmf.cnf with new version
done
Generating /var/lib/texmf/web2c/fmtutil.cnf ... done
Regenerating /var/lib/texmf/web2c/updmap.cfg ... done
Running initex. This may take some time. ...
fmtutil: /var/lib/texmf/web2c/latex.fmt installed.
fmtutil: /var/lib/texmf/web2c/pdflatex.fmt installed.
fmtutil: /var/lib/texmf/web2c/pdftex.fmt installed.
fmtutil: /var/lib/texmf/web2c/tex.fmt installed.
fmtutil: /var/lib/texmf/web2c/cont-en.efmt installed.
fmtutil: /var/lib/texmf/web2c/elatex.efmt installed.
fmtutil: /var/lib/texmf/web2c/etex.efmt installed.
fmtutil: /var/lib/texmf/web2c/latex.efmt installed.
fmtutil: /var/lib/texmf/web2c/mptopdf.efmt installed.
fmtutil: /var/lib/texmf/web2c/pdfelatex.efmt installed.
fmtutil: /var/lib/texmf/web2c/pdfetex.efmt installed.
fmtutil: /var/lib/texmf/web2c/pdflatex.efmt installed.
fmtutil: /var/lib/texmf/web2c/mf.base installed.
Running updmap. This may take some time. ...
If you want to change the default settings,
use /usr/bin/texconfig to configure teTeX.
Fixing permissions and group of ls-R as specified by debconf ...
Setting up psutils (1.17-17) ...
Setting up tetex-doc (2.0.2c-8) ...
mktexlsr: Updating /usr/local/share/texmf/ls-R...
mktexlsr: Updating /var/lib/texmf/ls-R...
mktexlsr: Updating /var/lib/texmf/ls-R-TEXMFMAIN...
mktexlsr: Updating /var/cache/fonts/ls-R...
mktexlsr: Done.
Luetaan pakettiluetteloita... Valmis
Muodostetaan riippuvuussuhteiden puu... Valmis
Luen tilatietoja
Alustan pakettien tiloja... Valmis
tiina@b-215-165:~$ sudo dpkg -i /var/cache/apt/archives/tetex-bin_2.0.2-30ubuntu3.5_i386.deb (Reading database ... 90546 files and directories currently installed.)
Preparing to replace tetex-bin 2.0.2-30ubuntu3.5 (using .../tetex-bin_2.0.2-30ubuntu3.5_i386.deb) ...
Unpacking replacement tetex-bin ...
Setting up tetex-bin (2.0.2-30ubuntu3.5) ...
Merging information from /etc/texmf/texmf.d/ into /etc/texmf/texmf.cnf ... done
Regenerating /var/lib/texmf/web2c/fmtutil.cnf ... done
Regenerating /var/lib/texmf/web2c/updmap.cfg ... done
Running initex. This may take some time. ...
fmtutil: /var/lib/texmf/web2c/latex.fmt installed.
fmtutil: /var/lib/texmf/web2c/pdflatex.fmt installed.
fmtutil: /var/lib/texmf/web2c/pdftex.fmt installed.
fmtutil: /var/lib/texmf/web2c/tex.fmt installed.
fmtutil: /var/lib/texmf/web2c/cont-en.efmt installed.
fmtutil: /var/lib/texmf/web2c/elatex.efmt installed.
fmtutil: /var/lib/texmf/web2c/etex.efmt installed.
fmtutil: /var/lib/texmf/web2c/latex.efmt installed.
fmtutil: /var/lib/texmf/web2c/mptopdf.efmt installed.
fmtutil: /var/lib/texmf/web2c/pdfelatex.efmt installed.
fmtutil: /var/lib/texmf/web2c/pdfetex.efmt installed.
fmtutil: /var/lib/texmf/web2c/pdflatex.efmt installed.
fmtutil: /var/lib/texmf/web2c/mf.base installed.
Running updmap. This may take some time. ...
If you want to change the default settings,
use /usr/bin/texconfig to configure teTeX.
Fixing permissions and group of ls-R as specified by debconf ...
tiina@b-215-165:~$ sudo apt-get install --reinstall lilypond
Luetaan pakettiluetteloita... Valmis
Muodostetaan riippuvuussuhteiden puu... Valmis
Suositellut paketit:
lilypond-doc
Seuraavat UUDET paketit asennetaan:
lilypond
0 päivitetty, 1 uutta asennusta, 0 poistettavaa ja 0 päivittämätöntä.
1 ei asennettu kokonaan tai poistettiin.
Noudettavaa arkistoa 0t/5865kt.
Purkamisen jälkeen käytetään 2974kt lisää levytilaa.
Esiräätälöidään paketteja...
(Reading database ... 90546 files and directories currently installed.)
Preparing to replace lilypond-data 2.6.3-9~breezy1 (using .../lilypond-data_2.6.3-9~breezy1_all.deb) ...
Unpacking replacement lilypond-data ...
Unpacking lilypond (from .../lilypond_2.6.3-9~breezy1_i386.deb) ...
Setting up lilypond-data (2.6.3-9~breezy1) ...
Running /usr/bin/mktexlsr /usr/share/texmf...
mktexlsr: Updating /var/lib/texmf/ls-R-TEXMFMAIN...
mktexlsr: Done.
GNU LilyPond configuration completed.
Please read /usr/share/doc/lilypond/README.Debian to get started.
Setting up lilypond (2.6.3-9~breezy1) ...
tiina@b-215-165:~$
Katos, tais onnistua. Kiitos! :)
-
Noi on aika pahoja probleemeja kun pakettihallinta kyykkää totaalisesti jonkun paketin virheellisyyden takia, hyvä, että sulla riitti kärsivällisyys. No onneks noita ei ihan joka päivä tuu vastaan.