Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Asentaminen ja käyttöönotto => Aiheen aloitti: Heko - 12.10.09 - klo:11.17
-
Hei,
Tarvitsen työssä windowssia joten joudun sen asentamaan nyt rinnalle. Kysynkin että miten minun olisi nyt parasta toimia, kun ubuntu on asennettu ja toimii täydellisesti. Asennan windowssin erilliselle kovalevylle, ja sillon olen irroittanut ubuntun levyn asemasta. Windows menee ide asemalle ja ubuntu on sata asemalle, kerran kokeilen näin niin ide levy tyhjeni täysin, voinko odottaa nyt samanlaista reaktiota?
Onko jollain vinkkejä tai opasta miten toimia? Olisin todella kiitollinen. Kiinnostaisi myös tietää voinko selata /home tiedostoja windowssilla?
Ystävällisin terveisin,
Heikki K.
-
http://wiki.ubuntu-fi.org/Asentaminen_Windowsin_rinnalle
en ole varma mutta windowsin asennettuasi kannattaisi vasta ubuntu asentaa ja jättää wuindows levykin paikoilleen jolloin ubuntu tunnistaisi sen ja osaisi lisää grub menuun. foorumilla taitaa kyllä tästä asiasta olla jos kuin monta ketjua. kokeile hakua
-
Jos et tarvitse Windowsissa nopeaa 3D-grafiikkaa tai videotoistoa, virtualisoitu asennus voisi olla hyvä vaihtoehto. Silloin myös kotihakemiston jakaminen onnistuu paremmin, eli voit lukemisen lisäksi kirjoittaa turvallisesti tiedostoihin Windowsin puolelta.
VMWare Server/Player ja VirtualBox ovat toimivia ilmaisia ratkaisuja.
-
Tarvitsisin kyllä tuota 3d grafiikkaa windowssissa, videotoistoa en niinkään.
Jakke77, onhan noita oppaita toisinpäin olemassa mutta ei näinpäin valitettavasti. Eikä ole kyllä yhtään ketjua missä joku kertoisi miten toimia, kaikki kehottavat tekemään toisinpäin. En vaan haluaisi alkaa asentamaan hyvin toimivaa ja konffittua ubuntua uudelleen.
-
Nyt tulee mutulla, viisaammat korjatkoon: Onnistuuko tuo niin, että asennuksessa valitsee osioinnin itse ja asentaa sinne tyhjälle levylle. Asennuksen jälkeen sitten asentaa vielä Grubin uudelleen?
-
Tuskin se ide levy tyhjeni, windows vaan ei osaa lisätä itseään grubiin niin se täytyy tehdä käsin. Sen takia toi onnistuukin toisin päin paremmin kun ubuntu tekee grubin ja tunnistaa windowsin. Katso tästä ketjusta nimim. cute1 viestit, varsinkin se jälkimmäinen. http://forum.ubuntu-fi.org/index.php?topic=25361.0
-
Katso tästä ketjusta nimim. cute1 viestit, varsinkin se jälkimmäinen.
Mistä ketjusta? ???
-
Katso tästä ketjusta nimim. cute1 viestit, varsinkin se jälkimmäinen.
Mistä ketjusta? ???
http://forum.ubuntu-fi.org/index.php?topic=25361.0 <<<<<<<<<<< Tuo!
-
Eli nyt tein miten ajattelin. Otin sata-kovon irti joka sisältää Ubuntun. Laitoin koneeseen kiinni vanhan ide levyn jonne asensin windows 7.
fdisk -lu näyttää tältä:
Levy /dev/sda: 1000.2 Gt, 1000204886016 tavua
255 päätä, 63 sektoria/ura, 121601 sylinteriä, yhteensä 1953525168 sektoria
Yksiköt = 1 * 512 = 512 -tavuiset sektorit
Levyn tunniste: 0x0002d3ef
Laite Käynn Alku Loppu Lohkot Id Järjestelmä
/dev/sda1 * 63 21478904 10739421 83 Linux
/dev/sda2 21478905 27342629 2931862+ 82 Linux-sivutus / Solaris
/dev/sda3 27342630 1953520064 963088717+ 83 Linux
Levy /dev/sdb: 81.9 Gt, 81964302336 tavua
255 päätä, 63 sektoria/ura, 9964 sylinteriä, yhteensä 160086528 sektoria
Yksiköt = 1 * 512 = 512 -tavuiset sektorit
Levyn tunniste: 0x000c3b55
Laite Käynn Alku Loppu Lohkot Id Järjestelmä
/dev/sdb1 * 2048 206847 102400 7 HPFS/NTFS
Osion 1 loppu ei ole sylinterin rajalla.
/dev/sdb2 206848 160083967 79938560 7 HPFS/NTFS
Windows on asennettu osioon /dev/sdb2, nyt kiinnostaisi tietää miten saan Grubiin tuon Windows 7, jotta grub menusta saisin valita sen käyntiin halutessani.
Toimiiko se nyt suoraan lisäämällä menu.lst tiedostoon seuraavat rivit?
title Windows 7
root (hd1,1)
makeactive
chainloader +1
---
Ystävällisin terveisin,
Heikki.K
-
Toimiiko se nyt suoraan lisäämällä menu.lst tiedostoon seuraavat rivit?
title Windows 7
root (hd1,1)
makeactive
chainloader +1
Saattaahan tuo toimiakin. Jos ei käynnisty, kokeile lisätä tuon root-rivin jälkeen:
map (hd0) (hd1)
map (hd1) (hd0)
-
Sanoi että "Selected disk does not exist"", onko ideoita?
-
Vaihtamalla kovojen järjestystä biossista voin valita kummaltako bootataan ensin ja näin valita käytänkö Windows 7vai Ubuntua.
Olisi toki parempi jos se onnistuisi GRUB menusta, jotta tuo kauniimpikin osapuoli voisi hoidella office hommia windowssin puolella kun open officella se ei kuulemma onnistu. Olisiko jollain vinkkejä miten tämän nyt toteuttaisi?
Ystävällisin terveisin,
Heikki.K
-
Sanoi että "Selected disk does not exist"", onko ideoita?
Kovalevyn jumpperi on väärässä asennossa, eli todennäköisesti masterina. Laita winukkalevyn jumpperi slave-asentoon, niin luulisi tulevan olevaksi.. :)
-
Ei auttanut, nyt mietityttää. Biossissa pitää vaihtaa IDE kovo ykkös HDD:ksi jotta boottaus siltä onnistuu, kummaltakin kovalevyltä boottaus ei onnistu.
-
Kannattaisi ehkä laittaa se Windows-levy suosiolla ykköseksi, kun kerran asensitkin Windowsin niin. Sitten pitäisi vain asentaa GRUB kyseisen levyn MBR:ään. Kokeile tätä ohjetta: http://wiki.ubuntu-fi.org/Grub-kaynnistyslataaja
-
Windows ensin ensimmäiselle levylle, sitten Windowsin omalla ohjelmalla teet varaamatonta tilaa Ubuntulle tai alustat ext3. Nyt pitäisi asennusohjelma tunnistaa levyn tai osion. Ubuntun asennusohjelma asentaa Grubin, jos kaikki menee kuten pitää. Asentaessa kysytään haluaako oikeuksia Windowsille, sanamuotoa en muista, mutta ruksia pitää. Myöhemminkin voi oikeuksia lisätä.
-
Windows ensin ensimmäiselle levylle, sitten Windowsin omalla ohjelmalla teet varaamatonta tilaa Ubuntulle tai alustat ext3.
Heko varmaankin haluaa säilyttää nykyisen Ubuntu-asennuksensa, joka sijaitsee toisella kiintolevyllä.
-
Windows ensin ensimmäiselle levylle, sitten Windowsin omalla ohjelmalla teet varaamatonta tilaa Ubuntulle tai alustat ext3.
Heko varmaankin haluaa säilyttää nykyisen Ubuntu-asennuksensa, joka sijaitsee toisella kiintolevyllä.
Anteeksi huomaamattomuuteni. Näitä pitkiä viestiketjuja ei tule aina luettua ajatuksen kanssa.
-
Hei,
Ei onnistu minun taidoillani tuo grubin asentaminen tuonne windows kovolle. Ajoin netistä tällaisen skriptin:
https://sourceforge.net/projects/bootinfoscript/ (https://sourceforge.net/projects/bootinfoscript/)
ja tulos oli:
============================= Boot Info Summary: ==============================
=> Grub0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Windows is installed in the MBR of /dev/sdb
sda1: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.04
Boot files/dirs: /boot/grub/menu.lst /etc/fstab
sda2: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb1: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /bootmgr /Boot/BCD /grldr
sdb2: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /Windows/System32/winload.exe
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Levy /dev/sda: 1000.2 Gt, 1000204886016 tavua
255 päätä, 63 sektoria/ura, 121601 sylinteriä, yhteensä 1953525168 sektoria
Yksiköt = 1 * 512 = 512 -tavuiset sektorit
Levyn tunniste: 0x0002d3ef
Partition Boot Start End Size Id System
/dev/sda1 * 63 21,478,904 21,478,842 83 Linux
/dev/sda2 21,478,905 27,342,629 5,863,725 82 Linux swap / Solaris
/dev/sda3 27,342,630 1,953,520,064 1,926,177,435 83 Linux
Drive: sdb ___________________ _____________________________________________________
Levy /dev/sdb: 81.9 Gt, 81964302336 tavua
255 päätä, 63 sektoria/ura, 9964 sylinteriä, yhteensä 160086528 sektoria
Yksiköt = 1 * 512 = 512 -tavuiset sektorit
Levyn tunniste: 0x000c3b55
Partition Boot Start End Size Id System
/dev/sdb1 * 2,048 206,847 204,800 7 HPFS/NTFS
/dev/sdb2 206,848 160,083,967 159,877,120 7 HPFS/NTFS
blkid -c /dev/null: ____________________________________________________________
/dev/sda1: UUID="be74509e-8c94-44f8-93eb-5666b98a64cd" TYPE="ext3"
/dev/sda2: TYPE="swap" UUID="336bd2e1-3577-4b62-b545-ab2d4463fe72"
/dev/sda3: UUID="4b09b66f-3fcd-49d8-9c51-c9ce6295d498" TYPE="ext3"
/dev/sdb1: UUID="2CD0452FD0450116" LABEL="JM-drjestelmM-dn varaama" TYPE="ntfs"
/dev/sdb2: UUID="D49C62D09C62AD24" TYPE="ntfs"
=============================== "mount" output: ===============================
/dev/sda1 on / type ext3 (rw,relatime,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
varrun on /var/run type tmpfs (rw,nosuid,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
lrm on /lib/modules/2.6.28-16-generic/volatile type tmpfs (rw,mode=755)
/dev/sda3 on /home type ext3 (rw,relatime)
securityfs on /sys/kernel/security type securityfs (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/viittis/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=viittis)
=========================== sda1/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=be74509e-8c94-44f8-93eb-5666b98a64cd ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=be74509e-8c94-44f8-93eb-5666b98a64cd
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-16-generic
uuid be74509e-8c94-44f8-93eb-5666b98a64cd
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=be74509e-8c94-44f8-93eb-5666b98a64cd ro quiet splash
initrd /boot/initrd.img-2.6.28-16-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode)
uuid be74509e-8c94-44f8-93eb-5666b98a64cd
kernel /boot/vmlinuz-2.6.28-16-generic root=UUID=be74509e-8c94-44f8-93eb-5666b98a64cd ro single
initrd /boot/initrd.img-2.6.28-16-generic
title Ubuntu 9.04, kernel 2.6.28-15-generic
uuid be74509e-8c94-44f8-93eb-5666b98a64cd
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=be74509e-8c94-44f8-93eb-5666b98a64cd ro quiet splash
initrd /boot/initrd.img-2.6.28-15-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-15-generic (recovery mode)
uuid be74509e-8c94-44f8-93eb-5666b98a64cd
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=be74509e-8c94-44f8-93eb-5666b98a64cd ro single
initrd /boot/initrd.img-2.6.28-15-generic
title Ubuntu 9.04, kernel 2.6.28-14-generic
uuid be74509e-8c94-44f8-93eb-5666b98a64cd
kernel /boot/vmlinuz-2.6.28-14-generic root=UUID=be74509e-8c94-44f8-93eb-5666b98a64cd ro quiet splash
initrd /boot/initrd.img-2.6.28-14-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-14-generic (recovery mode)
uuid be74509e-8c94-44f8-93eb-5666b98a64cd
kernel /boot/vmlinuz-2.6.28-14-generic root=UUID=be74509e-8c94-44f8-93eb-5666b98a64cd ro single
initrd /boot/initrd.img-2.6.28-14-generic
title Ubuntu 9.04, kernel 2.6.28-13-generic
uuid be74509e-8c94-44f8-93eb-5666b98a64cd
kernel /boot/vmlinuz-2.6.28-13-generic root=UUID=be74509e-8c94-44f8-93eb-5666b98a64cd ro quiet splash
initrd /boot/initrd.img-2.6.28-13-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-13-generic (recovery mode)
uuid be74509e-8c94-44f8-93eb-5666b98a64cd
kernel /boot/vmlinuz-2.6.28-13-generic root=UUID=be74509e-8c94-44f8-93eb-5666b98a64cd ro single
initrd /boot/initrd.img-2.6.28-13-generic
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid be74509e-8c94-44f8-93eb-5666b98a64cd
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=be74509e-8c94-44f8-93eb-5666b98a64cd ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid be74509e-8c94-44f8-93eb-5666b98a64cd
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=be74509e-8c94-44f8-93eb-5666b98a64cd ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid be74509e-8c94-44f8-93eb-5666b98a64cd
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
v
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda1 during installation
UUID=be74509e-8c94-44f8-93eb-5666b98a64cd / ext3 relatime,errors=remount-ro 0 1
# /home was on /dev/sda3 during installation
UUID=4b09b66f-3fcd-49d8-9c51-c9ce6295d498 /home ext3 relatime 0 2
# swap was on /dev/sda2 during installation
UUID=336bd2e1-3577-4b62-b545-ab2d4463fe72 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda1: Location of files loaded by Grub: ===================
6.0GB: boot/grub/menu.lst
5.9GB: boot/grub/stage2
6.0GB: boot/initrd.img-2.6.28-11-generic
5.9GB: boot/initrd.img-2.6.28-13-generic
6.0GB: boot/initrd.img-2.6.28-14-generic
5.9GB: boot/initrd.img-2.6.28-15-generic
6.0GB: boot/initrd.img-2.6.28-16-generic
5.9GB: boot/vmlinuz-2.6.28-11-generic
5.9GB: boot/vmlinuz-2.6.28-13-generic
5.9GB: boot/vmlinuz-2.6.28-14-generic
6.0GB: boot/vmlinuz-2.6.28-15-generic
6.0GB: boot/vmlinuz-2.6.28-16-generic
6.0GB: initrd.img
5.9GB: initrd.img.old
6.0GB: vmlinuz
6.0GB: vmlinuz.old
Asennettuna siis ei ole vista vaan Windows 7. Osaisiko joku tämän perusteella kertoa minulle toimivan ja helpohkon ratkaisun miten lisätä tuo W7 tuonne grubiin.
Ystävällisin terveisin,
Heikki.K
-
Ei onnistu minun taidoillani tuo grubin asentaminen tuonne windows kovolle.
Sitten taitaa olla Ubuntun uudelleenasennus edessä.
Asennettuna siis ei ole vista vaan Windows 7. Osaisiko joku tämän perusteella kertoa minulle toimivan ja helpohkon ratkaisun miten lisätä tuo W7 tuonne grubiin.
Annoin jo ratkaisun, jolla periaatteessa pitäisi toimia. Ei toiminut, joten joudut varmaankin tekemään Windows-levystä koneen ykköslevyn ja kirjoittamaan Grubin sinne joko manuaalisesti tai asentamalla Ubuntun uudelleen.
Vai kokeilitko edes niitä map (hd... -rivejä? Entä jos käytät rootin sijaan rootnoverifyta:
title Windows 7
rootnoverify (hd1,1)
makeactive
map (hd0) (hd1)
map (hd1) (hd0)
chainloader +1
Tai ehkä näin:
title Windows 7
map (hd0) (hd1)
map (hd1) (hd0)
rootnoverify (hd0,1)
makeactive
chainloader +1
-
Hei,
Kiitos vinkeistä, mutta mikään ei näytä toimivan. Ostan tässä jokupäivä uuden sata levyn niin eiköhän ala toimia, veikkaan että kiinni tuosta IDE romusta.
Terveisin
Heikki.K