Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Laitealue => Aiheen aloitti: uhappo - 14.05.09 - klo:14.48
-
Nostetaas tätä jälleen kerran
Elikkäs, toimiiko jollain HP:laisella ATIn kanssa HDMI?
Mä en saa 23" näyttöäni (enkä saanu paria HDMI-töllöäkään) näyttämään oikein HDMI-liitännällä. Tekstit on mössöä, esim conkyn tekstit näyttää just about tosi kehnolta. Sit omituinen, ihan kuin kuvat ja videon katselu näyttäis ok:lta. Sit kun tyrkkää liitännän VGA:lla niin välittömästi näyttää hyvältä, aikuisten oikeasti.
Mulla siis läppärissä ATI Radeon HD 3450.
Hjälp?
-
Mikä reso käytössä, koska se vaikuttaa aika paljon kuvan terävyyteen (Järjestelmä > Asetukset > Näytön tarkkuus)?
-
Mikä reso käytössä, koska se vaikuttaa aika paljon kuvan terävyyteen (Järjestelmä > Asetukset > Näytön tarkkuus)?
Tää mjonitor on Samsung SyncMaster 2333HD ja ohjekirja antaa natiiviresoks 1920x1080, 16:9-kuvasuhteella, display preferenssissä on juuri samat lukemat. 1680x1050 ei näytä niin karmealta, mut se on yhtä vääristynyt kuin oma arvomaailma. IRCissä kyselin taannoin asiaa, mut ainut johtolanka minkä sain on että ATI ,vai läppärikö anyway, skaalaa väärin tota HDMI:tä? Onko sinne päinkään diagnoosi? Jos kohdallaan niin mites hoitoennuste?
-
Ei ole kokemusta ATI:sta, mutta kannattaa kokeilla seuraavaa:
http://ubuntuforums.org/showthread.php?t=1003099&highlight=nvidia+dvi+overscan&page=2
Siis pitää luoda oma Modeline ja kokeilla miten HDMI siihen suhtautuu.
-
Tänks. Selasin ton läpi ja kyllähän tuolla popula on onnistunut nvidialla, hieman hirvittää lähteä ATIlle noita tekemään, voip aika varmasti mennä sekaisin pakka. Ei oo ihan niin varmuutta ja selkoa että mitä tossa tehdään.
-
Kannattaa ehdottomasti kokeilla. Mitään ei häviä. ATI toimii periaatteessa ihan samoin. Telkkari ilmoittaa sitten jos ei onnistu. Itse sain DVI=>HDMI liitoksen toimimaan 32" LCD:hen. Tosin pientä overscannia jäi mut ei haittaa.
Lähinnä noista ohjeista kannattaa hakea oikeat Modelinet. Itse en pysty säätämään kuin resoluutiota (kuvan paikkaa ei voi säätää).
Mutta olen tyytyväinen 1920x1080i käyttäjä.
-
Tässä on mun xorg.conf, siis VGA-kytköksellä
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
SubSection "Display"
Virtual 3200 1080
EndSubSection
EndSection
Section "Module"
Load "glx"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "fglrx"
EndSection
Mitähän pitäis lisätä ja minne, tuntuu että aika ohuella jäällä oon jos lähden yksin tota indiana jonesmaisesti kokeilemaan
-
Alkuun laitan linkin omaan xorg.conf:iin:
http://forum.ubuntu-fi.org/index.php?topic=26786.0
Sitten alla pari vinkkiä sun versioon. Muista että joudut luomaan oman Modelinen.
Joten tämä EI toimi sellaisenaan. Lisää ohjeita on netti pullollaan.
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Monitor"
Identifier "Configured Monitor"
Modeline "1920x1080" 74.25 1820 2008 2052 2200 980 1084 1094 1124 +hsync +vsync Interlace
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
SubSection "Display"
#Virtual 3200 1080
Modes "1920x1080"
EndSubSection
EndSection
Section "Module"
Load "glx"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "fglrx"
EndSection
-
Tässä on xrandrin tulosta HDMI päällä
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 3200 x 1080
LCD connected (normal left inverted right x axis y axis)
1280x800 60.0 +
1280x768 60.0
1280x720 60.0
1024x768 60.0
1152x648 60.0
800x600 60.0
720x480 60.0
640x480 60.0
640x400 60.0
512x384 60.0
400x300 60.0
320x240 60.0
320x200 60.0
DFP_EXTTMDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 160mm x 90mm
1920x1080 24.0 + 60.0 50.0 30.0 25.0
1776x1000 60.0 30.0
1680x1050 60.0 60.0
1400x1050 60.0
1280x1024 75.0 75.0 60.0 60.0
1440x900 59.9 59.9
1280x960 60.0 60.0
1280x800 60.0*
1152x864 75.0 75.0 60.0 60.0
1280x768 59.9
1280x720 60.0 50.0
1024x768 75.0 75.0 70.1 70.1 60.0 60.0
1152x648 60.0
800x600 72.2 72.2 75.0 75.0 60.3 60.3 56.2 56.2
720x576 50.0
720x480 59.9
640x480 72.8 75.0 72.8 75.0 60.0
640x400 75.1 59.9
512x384 60.0 74.9
400x300 75.0 60.7
320x240 75.6 60.0
320x200 75.5 60.1
CRT1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 518mm x 32mm
1920x1080 59.9 +
1776x1000 60.0
1680x1050 60.0
1400x1050 60.0
1280x1024 75.0 60.0
1440x900 59.9
1280x960 60.0
1280x800 60.0*
1152x864 75.0 60.0
1280x768 59.9
1280x720 60.0
1024x768 75.0 70.1 60.0
1152x648 60.0
800x600 72.2 75.0 70.0 60.3 56.2
720x480 60.0
640x480 75.0 72.8 75.0 60.0
640x400 75.1 59.9
512x384 60.0 74.9
400x300 75.0 60.7
320x240 75.6 60.0
320x200 75.5 60.1
TV disconnected (normal left inverted right x axis y axis)
EDIT: Eikäkä mulla oli tossa myös VGA-liitin kiinni, mut HDMI oli valittu näytöstä inputiks
EDIT2: Nyt kun kattoo tarkemmin tota, niin mitäs ihmettä tää rivi tarkoittaa?
1920x1080 24.0 + 60.0 50.0 30.0 25.0
-
Saat paremmat tiedot tuon Nvidian ohjeen mukaan. Eli käynnistetään X verbose tilassa ja lokitetaan tulos. Siitä saa napattua Modelinen suoraan.
Ei ole kokemusta juuri xrandr käytöstä koska ei oikein tuntunut pelittävän mun kokoonpanossa.