Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Laitealue => Aiheen aloitti: jussike - 18.11.08 - klo:21.39
-
HP Omnibook xt6050:ssa näytönohjaimen ja näytön automaattitunnistus toimi hyvin Ubuntu 6.06:ssa, mutta ei enää kokeilemissani 7.10, 8.04, 8.10.
Tässä toimiva xorg.conf uudempiin versioihin. Testattu toimivaksi Ubuntu Hardy Heron 8.04.1. Tein ton yhdistelemällä uutta ja vanhaa (Ubuntu 6.06) xorg.conffia, kun kumpikaan ei suoraan toiminut. Yrityksen ja erehdyksen kautta siis. Ongelma ei ole distrokohtainen, ainakin Debianissa sama juttu: Etch:ssä toimii automaatilla, Lennyssä ei.
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fi"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "i810"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Synaptics Touchpad"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
-
Jouduin taas tekemisiin tämän romun kanssa.
Pari havaintoa.
Ylläoleva konffi ei näyttäisi toimivan live-cd:llä, mutta asennuksessa kyllä.
Kone jäätyilee Hardylla, mutta kernel-optio irqpoll näyttäisi auttavan. (kop kop)
-
Hei
Ite ostin kyseihen hp:n joskus ja huomasin tuon että 7.04 uudempaa on turha koittaa asentaa. Kone jäi äidilleni nettikoneeksi kotoa muutettuani ja siinä pöyrii xp. Nyt ois tarkoitus laittaa siihen ubuntu. Kysymys kuuluu vaan että miten sen tuohon saa asennettua?
-
Aivan hirveä laite.
6.06 toimii, 7.04 en ole kokeillut.
Uudemmilla jäätyminen on väistämätöntä. Irqpoll ei auttanut.
Päädyin asentamaan siihen kokonaan eri distron.
-
mkä sulla on nyt siinä käytössä? täysi vaan saada siihen joku linux. ja mieluiten sellainen jossa toimisi tai saisi toimimaan mokkulan(huawei e169 tai option 225).
-
Centosin siihen laitoin, en muista versiota. Katsoin vaan sellaisen distron, että siinä ois mahdollisimman pitkä tuki ja vanha Xorg. Kone ei ole mulla, joten en voi tarkistaa mitään.
-
kiitokset, jos tota siinä koittais.
EDIT: Uusin CentOS 5.3 näyttää ainakin live-cd:ltä toimivan..
-
Sain taas itselleni em. hp:n. Centos ei tuntunut kivalta niin koitin tuota yllä olevaa xorg.confia ja hyvin toimii 8.04.4 kanssa. Ainut mikä ei toimi on splash eli ruutuu pysyy mustana kirjautumis ikkunaan asti.
-
:) Hyvä niin.