Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Asentaminen ja käyttöönotto => Aiheen aloitti: adjektiivi - 08.08.08 - klo:21.07
-
Elikkä tälläistä heittää aina kun kone aukeaa 40.495983] PnP: PnPACPI method_name__crs failure for PnP0c01
onko vaarallista? kuinka voisin vakuttaa tähän ettei tätä tulisi?
Ennen tuota tekstiä lukee GRUB loading 5 tai sinne päin? tästäkin jos joku osaisi kertoa. niin ei vaivaisi.
lyösin juttua tuosta grubista että se on jonkun lainen alkulataaja, mutta eikai siitä haittaa ole kun se teksti tulee?
-
Valikko->Sovellukset->Apuohjelmat->Pääte
cat /var/log/syslog | grep -i 'pnpacpi'dmesg | grep -i 'pnpacpi'
Noiden komentojen tulosteet tänne.
Häiritseekö tuo millään lailla koneen suoritusta?
Toimiiko kaikki?
-
en tiedä mihin tuo 40.495983] PnP: PnPACPI method_name__crs failure for PnP0c01 vaikuttaa, mutta työpöydän nappulat ja resot saattavat muuttua ihan kummallisiksi kun käynnistän koneen uudelleen tai lukitsen näytön.
-
Valikko->Sovellukset->Apuohjelmat->Pääte
cat /var/log/syslog | grep -i 'pnpacpi'dmesg | grep -i 'pnpacpi'
Noiden komentojen tulosteet tänne.
Häiritseekö tuo millään lailla koneen suoritusta?
Toimiiko kaikki?
a245@2345:~$ cat /var/log/syslog | grep -i 'pnpacpi'
Aug 8 12:09:26 2345 kernel: [ 30.388440] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
Aug 8 12:24:14 2345 kernel: [ 30.558224] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
Aug 8 15:24:00 2345 kernel: [ 55.677298] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
Aug 8 16:56:36 2345 kernel: [ 39.496247] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
Aug 8 19:59:19 2345 kernel: [ 40.902411] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
Aug 8 20:53:20 2345 kernel: [ 56.689490] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
Aug 8 20:55:11 2345 kernel: [ 39.470091] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
a245@2345:~$
a245@2345:~$ dmesg | grep -i 'pnpacpi'
[ 39.470091] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
a245@2345:~$
-
osaisiko joku auttaa? googlettamalla en löytänyt oikeen vastausta, voi johtua huonosta lontoon kielen taidostakin ;D
tuntuu että se jumittaa koneen käynnistystä pikkuisen, ainakin verrattuna mitä toisella koneella käynnityy ilman tuota failure tekstiä.
bootchart näyttää näin: mutta en tiedä sitten näkyykö se tuolla jos jumittaa?
(http://xs130.xs.to/xs130/08350/hardy-20080831-2294.png.xs.jpg) (http://xs.to/xs.php?h=xs130&d=08350&f=hardy-20080831-2294.png)
-
Onko koneessa kiinni monta lisälaitetta?
Virhe johtuu luultavasti väärin tunnistetusta tai huonosti tuetusta laitteesta.
Kokeile poistaa lisälaitteita ja tarkkaile "dmesg"in tulostetta.
en tiedä mihin tuo 40.495983] PnP: PnPACPI method_name__crs failure for PnP0c01 vaikuttaa, mutta työpöydän nappulat ja resot saattavat muuttua ihan kummallisiksi kun käynnistän koneen uudelleen tai lukitsen näytön.
Mikä näytönohjain?
-
lisälaitteita ovat nettipiuha ja kvm kytkin, ja luulisi että se sama failure teksti toistuisi toisessakin koneessa jos kvm kytkimestä johtuisi?
näyttis on nvidia geforce 8400gs
dmesg
0.000000] ACPI: APIC 7FEE7A40, 0084 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] ACPI: SSDT 7FEE82E0, 0304 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
[ 0.000000] swsusp: Registered nosave memory region: 0000000000098000 - 0000000000099000
[ 0.000000] swsusp: Registered nosave memory region: 0000000000099000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519906
[ 0.000000] Kernel command line: root=UUID=2be58421-5a3c-497f-b9b2-d73e155c3ca0 ro quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2000.586 MHz processor.
[ 28.792158] Console: colour VGA+ 80x25
[ 28.792162] console [tty0] enabled
[ 28.792386] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 28.792630] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 28.872348] Memory: 2065920k/2095996k available (2177k kernel code, 28700k reserved, 1006k data, 368k init, 1178492k highmem)
[ 28.872354] virtual kernel memory layout:
[ 28.872355] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 28.872356] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 28.872357] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 28.872358] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 28.872358] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 28.872359] .data : 0xc03204c4 - 0xc041bdc4 (1006 kB)
[ 28.872360] .text : 0xc0100000 - 0xc03204c4 (2177 kB)
[ 28.872363] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 28.872400] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 28.872526] hpet clockevent registered
[ 28.952397] Calibrating delay using timer specific routine.. 4004.30 BogoMIPS (lpj=8008607)
[ 28.952421] Security Framework initialized
[ 28.952425] SELinux: Disabled at boot.
[ 28.952434] AppArmor: AppArmor initialized
[ 28.952438] Failure registering capabilities with primary security module.
[ 28.952444] Mount-cache hash table entries: 512
[ 28.952536] Initializing cgroup subsys ns
[ 28.952539] Initializing cgroup subsys cpuacct
[ 28.952547] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[ 28.952553] monitor/mwait feature present.
[ 28.952554] using mwait in idle threads.
[ 28.952557] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 28.952559] CPU: L2 cache: 2048K
[ 28.952561] CPU: Physical Processor ID: 0
[ 28.952562] CPU: Processor Core ID: 0
[ 28.952564] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
[ 28.952571] Compat vDSO mapped to ffffe000.
[ 28.952581] Checking 'hlt' instruction... OK.
[ 28.968762] SMP alternatives: switching to UP code
[ 28.970147] Early unpacking initramfs... done
[ 29.254982] ACPI: Core revision 20070126
[ 29.255016] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 29.266093] CPU0: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
[ 29.266109] SMP alternatives: switching to SMP code
[ 29.266743] Booting processor 1/1 eip 3000
[ 29.276868] Initializing CPU#1
[ 29.355715] Calibrating delay using timer specific routine.. 4001.13 BogoMIPS (lpj=8002271)
[ 29.355721] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
[ 29.355725] monitor/mwait feature present.
[ 29.355728] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 29.355729] CPU: L2 cache: 2048K
[ 29.355731] CPU: Physical Processor ID: 0
[ 29.355732] CPU: Processor Core ID: 1
[ 29.355734] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001 00000000
[ 29.356214] CPU1: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
[ 29.356231] Total of 2 processors activated (8005.43 BogoMIPS).
[ 29.356376] ENABLING IO-APIC IRQs
[ 29.356540] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 29.503571] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 29.523551] Brought up 2 CPUs
[ 29.523572] CPU0 attaching sched-domain:
[ 29.523574] domain 0: span 03
[ 29.523575] groups: 01 02
[ 29.523578] CPU1 attaching sched-domain:
[ 29.523579] domain 0: span 03
[ 29.523581] groups: 02 01
[ 29.523764] net_namespace: 64 bytes
[ 29.523772] Booting paravirtualized kernel on bare hardware
[ 29.524151] Time: 12:12:28 Date: 08/31/08
[ 29.524174] NET: Registered protocol family 16
[ 29.524328] EISA bus registered
[ 29.524332] ACPI: bus type pci registered
[ 29.548163] PCI: PCI BIOS revision 3.00 entry at 0xf1f00, last bus=2
[ 29.548165] PCI: Using configuration type 1
[ 29.548179] Setting up standard PCI resources
[ 29.557794] ACPI: EC: Look up EC in DSDT
[ 29.561617] ACPI: Interpreter enabled
[ 29.561622] ACPI: (supports S0 S1 S3 S4 S5)
[ 29.561636] ACPI: Using IOAPIC for interrupt routing
[ 29.565181] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 29.566065] PCI: Transparent bridge - 0000:00:1e.0
[ 29.566087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 29.566226] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 29.575211] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 29.575308] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 29.575408] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 29.575503] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 29.575597] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 29.575692] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 29.575787] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 29.575882] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[ 29.575991] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 29.576020] pnp: PnP ACPI init
[ 29.576027] ACPI: bus type pnp registered
[ 29.577379] ACPI Error (dsopcode-0548): Field [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) [20070126]
[ 29.577384] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.MEM_._CRS] (Node f7c4a990), AE_AML_BUFFER_LIMIT
[ 29.577410] ACPI Error (uteval-0233): Method execution failed [\_SB_.MEM_._CRS] (Node f7c4a990), AE_AML_BUFFER_LIMIT
[ 29.577416] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
[ 29.577467] pnp: PnP ACPI: found 10 devices
[ 29.577468] ACPI: ACPI bus type pnp unregistered
[ 29.577472] PnPBIOS: Disabled by ACPI PNP
[ 29.577655] PCI: Using ACPI for IRQ routing
[ 29.577658] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 29.611506] NET: Registered protocol family 8
[ 29.611508] NET: Registered protocol family 20
[ 29.611535] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 29.611539] hpet0: 3 64-bit timers, 14318180 Hz
[ 29.612570] AppArmor: AppArmor Filesystem Enabled
[ 29.615342] Time: tsc clocksource has been installed.
[ 29.615357] Switched to high resolution mode on CPU 0
[ 29.615452] Switched to high resolution mode on CPU 1
[ 29.639337] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 29.639341] system 00:01: ioport range 0x800-0x87f has been reserved
[ 29.639344] system 00:01: ioport range 0x294-0x297 has been reserved
[ 29.639348] system 00:01: ioport range 0x880-0x88f has been reserved
[ 29.639359] system 00:07: ioport range 0x400-0x4bf has been reserved
[ 29.639369] system 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 29.669685] PCI: Bridge: 0000:00:01.0
[ 29.669687] IO window: d000-dfff
[ 29.669690] MEM window: f8000000-fbffffff
[ 29.669693] PREFETCH window: e0000000-efffffff
[ 29.669696] PCI: Bridge: 0000:00:1e.0
[ 29.669698] IO window: e000-efff
[ 29.669702] MEM window: fde00000-fdefffff
[ 29.669705] PREFETCH window: disabled.
[ 29.669719] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 29.669723] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 29.669732] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 29.669741] NET: Registered protocol family 2
[ 29.707248] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 29.707465] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 29.707829] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 29.708017] TCP: Hash tables configured (established 131072 bind 65536)
[ 29.708020] TCP reno registered
[ 29.719325] checking if image is initramfs... it is
[ 39.240221] Freeing initrd memory: 7311k freed
[ 39.240861] audit: initializing netlink socket (disabled)
[ 39.240874] audit(1220184757.257:1): initialized
[ 39.241061] highmem bounce pool size: 64 pages
[ 39.242656] VFS: Disk quotas dquot_6.5.1
[ 39.242717] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 39.242824] io scheduler noop registered
[ 39.242826] io scheduler anticipatory registered
[ 39.242828] io scheduler deadline registered
[ 39.242839] io scheduler cfq registered (default)
[ 39.242930] Boot video device is 0000:01:00.0
[ 39.242935] PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
[ 39.243020] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 39.243052] assign_interrupt_mode Found MSI capability
[ 39.243080] Allocate Port Service[0000:00:01.0:pcie00]
[ 39.243275] isapnp: Scanning for PnP cards...
[ 39.595963] isapnp: No Plug & Play device found
[ 39.616478] Real Time Clock Driver v1.12ac
[ 39.616625] hpet_resources: 0xfed00000 is busy
[ 39.616661] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 39.617587] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 39.617642] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 39.617754] PNP: No PS/2 controller found. Probing ports directly.
[ 39.620159] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 39.620163] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 39.638696] mice: PS/2 mouse device common for all mice
[ 39.638815] EISA: Probing bus 0 at eisa.0
[ 39.638842] EISA: Detected 0 cards.
[ 39.638844] cpuidle: using governor ladder
[ 39.638846] cpuidle: using governor menu
[ 39.638918] NET: Registered protocol family 1
[ 39.638942] Using IPI No-Shortcut mode
[ 39.638967] registered taskstats version 1
[ 39.639054] Magic number: 4:781:229
[ 39.639123] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 39.639124] EDD information not available.
[ 39.639280] Freeing unused kernel memory: 368k freed
[ 39.819430] fuse init (API version 7.9)
[ 39.831784] ACPI: Fan [FAN] (on)
[ 39.836778] ACPI: SSDT 7FEE7E00, 01B7 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 39.837024] ACPI: SSDT 7FEE8210, 00CE (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 39.837158] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 39.837167] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 39.838384] ACPI: Thermal Zone [THRM] (20 C)
[ 39.975455] usbcore: registered new interface driver usbfs
[ 39.975475] usbcore: registered new interface driver hub
[ 39.975497] usbcore: registered new device driver usb
[ 39.976440] USB Universal Host Controller Interface driver v3.0
[ 39.976487] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
[ 39.976497] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 39.976500] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 39.976750] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 39.976776] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000ff00
[ 39.976893] usb usb1: configuration #1 chosen from 1 choice
[ 39.976913] hub 1-0:1.0: USB hub found
[ 39.976917] hub 1-0:1.0: 2 ports detected
[ 40.081947] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
[ 40.081958] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 40.081962] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 40.081983] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 40.082009] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000fe00
[ 40.082103] usb usb2: configuration #1 chosen from 1 choice
[ 40.082123] hub 2-0:1.0: USB hub found
[ 40.082128] hub 2-0:1.0: 2 ports detected
[ 40.133796] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 40.133799] e100: Copyright(c) 1999-2006 Intel Corporation
[ 40.149669] SCSI subsystem initialized
[ 40.167419] libata version 3.00 loaded.
[ 40.185761] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 40.185773] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 40.185777] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 40.185801] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 40.185828] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000fd00
[ 40.185937] usb usb3: configuration #1 chosen from 1 choice
[ 40.185957] hub 3-0:1.0: USB hub found
[ 40.185961] hub 3-0:1.0: 2 ports detected
[ 40.289573] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 40.289584] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 40.289588] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 40.289610] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 40.289636] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 40.289734] usb usb4: configuration #1 chosen from 1 choice
[ 40.289754] hub 4-0:1.0: USB hub found
[ 40.289758] hub 4-0:1.0: 2 ports detected
[ 40.393420] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 40.425236] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 40.445052] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[fdeff000-fdeff7ff] Max Packet=[1024] IR/IT contexts=[8/8]
[ 40.452110] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 40.476316] e100: eth0: e100_probe: addr 0xfdefe000, irq 20, MAC addr 00:1b:fc:f8:a6:7f
[ 40.476379] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
[ 40.476390] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 40.476393] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 40.476418] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 40.480314] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 40.480320] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xfdfff000
[ 40.550016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 40.550119] usb usb5: configuration #1 chosen from 1 choice
[ 40.550140] hub 5-0:1.0: USB hub found
[ 40.550146] hub 5-0:1.0: 8 ports detected
-
[ 40.652989] ahci 0000:00:1f.2: version 3.0
[ 40.653030] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
[ 40.948350] usb 2-1: device not accepting address 2, error -71
[ 41.611195] usb 5-7: new high speed USB device using ehci_hcd and address 3
[ 41.655136] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
[ 41.655141] ahci 0000:00:1f.2: flags: 64bit ncq led clo
[ 41.655146] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 41.655382] scsi0 : ahci
[ 41.655561] scsi1 : ahci
[ 41.655662] scsi2 : ahci
[ 41.655758] scsi3 : ahci
[ 41.655828] ata1: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe100 irq 222
[ 41.655831] ata2: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe180 irq 222
[ 41.655833] ata3: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe200 irq 222
[ 41.655836] ata4: SATA max UDMA/133 abar m1024@0xfdffe000 port 0xfdffe280 irq 222
[ 41.719133] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001633e1d]
[ 41.760759] usb 5-7: configuration #1 chosen from 1 choice
[ 41.998538] usb 2-1: new full speed USB device using uhci_hcd and address 4
[ 42.131310] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 42.132125] ata1.00: ATA-7: ST3500630AS, 3.CHL, max UDMA/100
[ 42.132130] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 42.133120] ata1.00: configured for UDMA/100
[ 42.151770] usb 2-1: configuration #1 chosen from 1 choice
[ 42.154670] hub 2-1:1.0: USB hub found
[ 42.156636] hub 2-1:1.0: 4 ports detected
[ 42.467131] usb 2-1.1: new full speed USB device using uhci_hcd and address 5
[ 42.601033] usb 2-1.1: configuration #1 chosen from 1 choice
[ 42.603937] hub 2-1.1:1.0: USB hub found
[ 42.605900] hub 2-1.1:1.0: 4 ports detected
[ 42.606513] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 42.764376] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H653L, 0514, max UDMA/33, ATAPI AN
[ 42.764380] ata2.00: applying bridge limits
[ 42.920007] ata2.00: configured for UDMA/33
[ 42.922384] usb 2-1.2: new low speed USB device using uhci_hcd and address 6
[ 43.061282] usb 2-1.2: configuration #1 chosen from 1 choice
[ 43.232406] ata3: SATA link down (SStatus 0 SControl 300)
[ 43.265822] usb 2-1.3: new low speed USB device using uhci_hcd and address 7
[ 43.407725] usb 2-1.3: configuration #1 chosen from 1 choice
[ 43.539874] ata4: SATA link down (SStatus 0 SControl 300)
[ 43.540034] scsi 0:0:0:0: Direct-Access ATA ST3500630AS 3.CH PQ: 0 ANSI: 5
[ 43.540910] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H653L 0514 PQ: 0 ANSI: 5
[ 43.541116] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[ 43.541145] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 43.541156] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 43.545197] ata_piix 0000:00:1f.1: version 2.12
[ 43.545213] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[ 43.545247] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 43.546867] scsi4 : ata_piix
[ 43.547434] scsi5 : ata_piix
[ 43.547717] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
[ 43.547719] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
[ 43.547922] Driver 'sd' needs updating - please use bus_type methods
[ 43.547985] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 43.547996] sd 0:0:0:0: [sda] Write Protect is off
[ 43.547998] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 43.548011] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 43.548050] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 43.548058] sd 0:0:0:0: [sda] Write Protect is off
[ 43.548060] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 43.548074] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 43.548076] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 43.565678] sda1 sda2 < sda5 >
[ 43.587212] sd 0:0:0:0: [sda] Attached SCSI disk
[ 43.591406] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 43.591423] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 43.595997] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 43.596001] Uniform CD-ROM driver Revision: 3.20
[ 43.596045] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 43.617249] usb 2-1.1.1: new low speed USB device using uhci_hcd and address 8
[ 43.715061] ata6: port disabled. ignoring.
[ 43.755149] usb 2-1.1.1: configuration #1 chosen from 1 choice
[ 43.964675] usb 2-1.1.4: new full speed USB device using uhci_hcd and address 9
[ 44.108569] usb 2-1.1.4: configuration #1 chosen from 1 choice
[ 44.113461] usbcore: registered new interface driver libusual
[ 44.113500] usbcore: registered new interface driver hiddev
[ 44.118228] Initializing USB Mass Storage driver...
[ 44.118989] scsi6 : SCSI emulation for USB Mass Storage devices
[ 44.119486] usb-storage: device found at 3
[ 44.119488] usb-storage: waiting for device to settle before scanning
[ 44.129649] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.2/2-1.2:1.0/input/input1
[ 44.146871] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1.2
[ 44.161595] input: Justcom Technology USB KVM Switch as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.0/input/input2
[ 44.170804] input,hidraw1: USB HID v1.10 Keyboard [Justcom Technology USB KVM Switch] on usb-0000:00:1d.1-1.3
[ 44.183532] input: Justcom Technology USB KVM Switch as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.1/input/input3
[ 44.214756] input,hidraw2: USB HID v1.10 Mouse [Justcom Technology USB KVM Switch] on usb-0000:00:1d.1-1.3
[ 44.228477] input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/input/input4
[ 44.246674] input,hidraw3: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:1d.1-1.1.1
[ 44.278226] input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.1/input/input5
[ 44.286634] input,hiddev96,hidraw4: USB HID v1.10 Device [Gaming Keyboard] on usb-0000:00:1d.1-1.1.1
[ 44.292280] input: G15 Keyboard G15 Keyboard as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.1/2-1.1.4/2-1.1.4:1.0/input/input6
[ 44.302601] input,hiddev97,hidraw5: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:1d.1-1.1.4
[ 44.302621] usbcore: registered new interface driver usbhid
[ 44.302626] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 44.303784] usbcore: registered new interface driver usb-storage
[ 44.303788] USB Mass Storage support registered.
[ 44.430970] Attempting manual resume
[ 44.430973] swsusp: Resume From Partition 8:5
[ 44.430975] PM: Checking swsusp image.
[ 44.431110] PM: Resume from disk failed.
[ 44.470432] kjournald starting. Commit interval 5 seconds
[ 44.470438] EXT3-fs: mounted filesystem with ordered data mode.
[ 49.110492] usb-storage: device scan complete
[ 49.116993] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 49.123480] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 49.130095] scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 49.136708] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 49.137978] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 49.138023] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 49.139098] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 49.139138] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 49.140220] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 49.140262] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 49.141343] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 49.141385] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 50.495920] Linux agpgart interface v0.102
[ 50.539855] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 50.582916] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 50.660695] input: Power Button (FF) as /devices/virtual/input/input7
[ 50.680537] ACPI: Power Button (FF) [PWRF]
[ 50.680632] input: Power Button (CM) as /devices/virtual/input/input8
[ 50.712469] ACPI: Power Button (CM) [PWRB]
[ 51.194749] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 51.194768] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 51.228421] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 51.300402] nvidia: module license 'NVIDIA' taints kernel.
[ 51.558534] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 51.558543] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 51.558635] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 52.313889] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 53.285184] lp: driver loaded but no devices found
[ 53.308344] coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong!
[ 53.308388] coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong!
[ 53.453011] TCP cubic registered
[ 53.472571] Adding 6072528k swap on /dev/sda5. Priority:-1 extents:1 across:6072528k
[ 53.772413] EXT3 FS on sda1, internal journal
[ 54.281196] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 457.252133] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 459.459574] NET: Registered protocol family 17
a245@a245-desktop:~$
tässä loput tekstitstä kun ei mahtunut samaan vietiin