Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Ubuntu tietokoneissa => Aiheen aloitti: s66s66 - 23.01.06 - klo:10.09
-
Asensin otsikon mukaisen printterin (Ubuntu 5.10).
Tein mielestäni kaiken oikein asennuksessa, ja printteri näkyy Ubuntussa ok,
mutta laite ei reagoi mitenkään printtaukseen (kokeilin printtausta geditistä ja firefoxixta ...).
Onko joku kokenut vastaavaa, mikä avuksi ...?
-
Onko joku kokenut vastaavaa, mikä avuksi ...?
Huoh :( LinuxPrinting.Org jälleen kerran.
http://www.linuxprinting.org/show_printer.cgi?recnum=HP-DeskJet_720C
"HP DeskJet 720C
Color inkjet printer, max. 600x600 dpi, works Perfectly"
Mikä on vaikeampaa kuin käyttää Foorumin hakukonetta?
-
Kiitos vastauksesta, vaan eipä toimi vieläkään ...
Kokeilin tuota toistakin ajuria tuloksetta ...
-
Yhteydet on varmasti sitten kunnossa sinne tulostimeen päin vehje on online ja piuhat on ehjiä ja kiinni. 90 % rautavioista johtuu rikkinäisistä liittimistä ja piuhoista. Toimiiko tulostin jollain toisella OS:lla
-
WinME:ssä, joka on toisena OS:nä samassa koneessa, printteri toimii ok.
Ubntussa printtaus näyttää menevän printterijonoon muutamaksi sekunniksi kuten pitääkin, mutta mitään ei tapahdu printterissä ...
-
Onko sinulla amd64, jos on niin on aika epätoivoista saada toimimaan. Mitä olen threadeja lukenut ubuntuforumilta tämä on ongelma ubuntun 64 versiossa, HP:n deskjetit eivät vain toimi niissä. Voit kokeilla ubuntun 32 bittistä livecd (http://se.releases.ubuntu.com/5.10/ubuntu-5.10-live-i386.iso):tä. Olisi tietenkin hyvä saada toimimaan 64:sellakin tämä. En tiedä sitten mitä varten tämä (http://dir.filewatcher.com/d/Ubuntu/amd64/text/djtools_1.2.5build1_amd64.deb.154794.html) on.
-
Ratkaisu ongelmaan löytyi Ubuntun UK-sivulta:
http://ubuntuforums.org/showthread.php?t=75286&page=2&highlight=HP+710
_______________
Lainaus viestiketjusta:
I had have similar problem with a hp 710c
The solution was in the /etc/pnm2ppa.conf
I use pnm2ppa because 710 is only supported by this
In this document apears the following text
#-----------set the printer model---------------------------
# The printer model will normally be set by a -v <model> command
# line argument. Otherwise, if not set in the configuration file
# it defaults to the 710/720 series. Remove/comment out the line
# "version 0" below to get the default choice.
#
# If there is more than one "version" entry activated, the last one
# will be used. The printer version can also be set with the command line
# option e.g., "-v 720".
version
#version 720 # 710, 712, 722 also acceptable
#version 820
#version 1000
I only have to put the model in the version line
the tex now is
#-----------set the printer model---------------------------
# The printer model will normally be set by a -v <model> command
# line argument. Otherwise, if not set in the configuration file
# it defaults to the 710/720 series. Remove/comment out the line
# "version 0" below to get the default choice.
#
# If there is more than one "version" entry activated, the last one
# will be used. The printer version can also be set with the command line
# option e.g., "-v 720".
version 710
#version 720 # 710, 712, 722 also acceptable
#version 820
#version 1000
I suppose that with anothers printers the system configuration tool don't select the printer.
-
Ratkaisu ongelmaan löytyi Ubuntun UK-sivulta:
http://ubuntuforums.org/showthread.php?t=75286&page=2&highlight=HP+710
Hienoa! Nyt vain olisi paikallaan pistää palautetta http://www.linuxprinting.org/show_printer.cgi?recnum=HP-DeskJet_720C
sivulle.