Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Asentaminen ja käyttöönotto => Aiheen aloitti: KuuSiTo - 14.02.08 - klo:20.41
-
Haluisin XP:n oletusjärjestelmäksi joten mites se hoituu? Mahdollisimman vahvasti väännettynä rautalangasta ;D
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=05890c2f-bbe0-4c4e-aee6-670788a27149 ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash noapic nolapic locale=fi_FI
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 7.10, kernel 2.6.22-14-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=05890c2f-bbe0-4c4e-aee6-670788a27149 ro quiet splash noapic nolapic locale=fi_FI
initrd /boot/initrd.img-2.6.22-14-generic
quiet
title Ubuntu 7.10, kernel 2.6.22-14-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=05890c2f-bbe0-4c4e-aee6-670788a27149 ro single
initrd /boot/initrd.img-2.6.22-14-generic
title Ubuntu 7.10, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
-
Haluisin XP:n oletusjärjestelmäksi joten mites se hoituu?
Koko /boot/grub/menu.lst tiedostossasi ei ole lainkaan määritelty Window-käynnistystä.
# examples
title Windows 95/98/NT/2000
root (hd0,0)
makeactive
chainloader +1
Poistamalla ko. kappaleesta #-merkit, voi homma toimia. Tosin tuo oli vain esimerkki.
Ihan suoraa asennuksessa kyllä Ubuntu kysyy, asennetaanko muita järjestelmiä käynnistyväksi.
Jos ruksi on laitettu oikeaan kohtaan, toimisi multiboot kuten pitää.
man grub
tai lukemalla ajatuksen kanssa ko. menu.lst, asia voisi jo selvitä.
-
Laitat windows XP käynnistyshässäkän tuon yläpuolelle. Selvität vain missä tuo windows sijaitsee...
## ## End Default Options ##
title Microsoft Windows XP
root (hd1,0)
makeactive
chainloader +1
title Ubuntu 7.10, kernel 2.6.22-14-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=05890c2f-bbe0-4c4e-aee6-670788a27149 ro quiet splash noapic nolapic locale=fi_FI
initrd /boot/initrd.img-2.6.22-14-generic
quiet
En tiedä sitten mitä tuon default arvon muuttaminen vaikuttaa
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
-
Laitat windows XP käynnistyshässäkän tuon yläpuolelle. Selvität vain missä tuo windows sijaitsee...
## ## End Default Options ##
title Microsoft Windows XP
root (hd1,0)
makeactive
chainloader +1
title Ubuntu 7.10, kernel 2.6.22-14-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.22-14-generic root=UUID=05890c2f-bbe0-4c4e-aee6-670788a27149 ro quiet splash noapic nolapic locale=fi_FI
initrd /boot/initrd.img-2.6.22-14-generic
quiet
En tiedä sitten mitä tuon default arvon muuttaminen vaikuttaa
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
Joko näin tai sitten vaihdat tuon 'default=0' kohdan osoittamaan siihen, monentenako windows on listalla.
-
Sen juuri haluaisin tietää, että monentenako se on ja se XP on sitte Windows Media Center edition ;)
-
Sen juuri haluaisin tietää, että monentenako se on ja se XP on sitte Windows Media Center edition ;)
Lasket kaikki title kohdat ylhäältä alaspäin, joissa ei ole tuota risuaitaa kommenttina... tästä tulee järjestys.