Ubuntu Suomen keskustelualueet
Ubuntun käyttö => Asentaminen ja käyttöönotto => Aiheen aloitti: Marbo - 27.11.07 - klo:21.25
-
Elikkäs, tuli saatua läppäri jossa on Intellin X3100 näyttis, nyt haluaisin saada kuvan myös kahdelle näytölle. Eli läppärin omalle ja sit tft:lle. Mites tämä olis mahdollista?
Kun olen asentanu Ubuntun ja sit menen kattomaan seiltä asetuksista sellaisen kuin Näytöt Ja Kuva niin siellä on 3 eri näyttö vaihtoehtoa. On 1, 2 ja sit on taas toinen 1.
Kun vaihdain siitä jonkin muun kun tuon ylimmän ykkösen oletusnäytöksi niin se heittää sit hirveen pienen reson ja muutenkin huonon kuvan.
Saan myös valittua jomman kumman näytön kerrallaan toimimaan. Mutten molempaa, mites se onnistuis?
Toivottavasti ei menny liian sekavaksi.
-
Voipi olla että joudut säätämään xorg.conf tiedostoa manuaalisesti. Jos et tiedä miten tämä tehdään, tutustu toki Ubuntu tutuksi -wikikirjaan.
Itse sain intelin gma 900 jotain näytönohjaimen toimimaan television kanssa seuraamalla seuraavia ohjeita ja tietenkin testaamalla eri vaihtoehtoja:
http://www.thinkwiki.org/wiki/Intel_Graphics_Media_Accelerator_900
tässä vielä ohje jota en ole koittanut mutta löytyi intelin näytönohjaimelle ubuntuforums.orgista. Kannattaa käyttää myös tuon paikan hakua hyväkseen
Myös googleen jos laittaa intel tvout linux tms hakusanoja saattaa löytyä...voit myös koittaa suoraan linux x3100 tvout tms...
-
En ole vieläkään saanu toimimaan Ubuntua kahdella erinäytöllä. Tai niin olen saanut, että molemmat näyttää samaa kuvaa, miten sais niin että toinen olisi niinkuin päänäytön oikealla tai vasemmalla puolella?
HP:n sivuilta kun katsoin läppärin tietoja niin se sanoi, että näyttis olisi Intel X3100, mutta kun intelin sivuilta koitin ajureita katsella niin tuli, että näyttis kuuluisi tälläiseen sarjaan: Mobile Intel® 965 Express Chipset Family.
Osaisiko/viitsisikö joku laittaa xorg.conf:ni niin, että toimisi molemmat näytöt. Tai kertois edes miten saisin toimimaan?
Alla vielä conffini:
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
EndSection
Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "Device"
Identifier "Failsafe Device"
Boardname "vesa"
Busid "PCI:0:2:0"
Driver "intel"
Screen 0
EndSection
Section "Monitor"
Identifier "Failsafe Monitor"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
modeline "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
Gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Failsafe Device"
Monitor "Failsafe Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1600 1200
Modes "1400x1050@60" "1600x1200@65" "1280x960@75" "1600x1200@60" "1280x1024@60" "1280x960@60" "1280x1024@75" "1152x864@75" "1024x768@60" "1024x768@70" "1024x768@75" "832x624@75" "800x600@60" "800x600@75" "800x600@72" "800x600@56" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "Synaptics Touchpad"
EndSection
Section "device" #
Identifier "device1"
Boardname "vesa"
Busid "PCI:0:2:0"
Driver "intel"
Screen 1
EndSection
Section "screen" #
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
SubSection "Display"
Depth 24
Modes "640x480@60" "640x480@72" "640x480@75" "800x600@56" "800x600@72" "800x600@75" "800x600@60" "832x624@75" "1024x768@75" "1024x768@70" "1024x768@60" "1152x864@75" "1280x1024@75" "1280x960@60" "1280x1024@60" "1280x960@75" "1400x1050@60" "1600x1200@65" "1600x1200@60"
EndSubSection
EndSection
Section "monitor" #
Identifier "monitor1"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
modeline "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
Gamma 1.0
EndSection
Section "device" #
Identifier "device2"
Boardname "VESA driver (generic)"
Busid "PCI:0:2:1"
Driver "vesa"
Screen 0
EndSection
Section "screen" #
Identifier "screen2"
Device "device2"
Defaultdepth 24
Monitor "monitor2"
SubSection "Display"
Depth 24
Modes "640x480@60" "640x480@72" "640x480@75" "800x600@56" "800x600@72" "800x600@75" "800x600@60" "832x624@75" "1024x768@75" "1024x768@70" "1024x768@60" "1152x864@75" "1280x1024@75" "1280x960@60" "1280x1024@60" "1280x960@75" "1400x1050@60" "1600x1200@65" "1600x1200@60"
EndSubSection
EndSection
Section "monitor" #
Identifier "monitor2"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
modeline "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
modeline "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection
-
Mullakin on siis vaan tuo klooni päällä, koska katson leffat televisiosta niin en ole ehtinyt perehtymään tollaiseen dual screen juttuun. Ilmeisesti tarvitsisi niin osaisin auttaa paremmin. Jos jostain satut löytämään ohjeen niin kerro toki muillekkin
-
Tai kertois edes miten saisin toimimaan?
En tiedä, mutta jospa tältä sivulta pääsisi alkuun?
http://www.intellinuxgraphics.org/dualhead.html
Ystävällisin terveisin Asmo Koskinen.
-
Tai kertois edes miten saisin toimimaan?
En tiedä, mutta jospa tältä sivulta pääsisi alkuun?
http://www.intellinuxgraphics.org/dualhead.html
Ystävällisin terveisin Asmo Koskinen.
Kokeillu olen, mutta tuloksetta. Pitänee siis jatkaa etsintöjä.
-
Elikkäs kaikkille muillekkin kenellä on ongelmia tän kanssa niin tässä oiva apu.
http://www.albertomilone.com/urandr.html
-
Kiitos, nyt voinkin sitten koittaa jotain muuta kuin clone modea