[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-12-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 (Ubuntu 3.0.0-12.20-generic 3.0.4) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.0.0-12-generic root=/dev/mapper/vg--haapa-lv--juuri ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfeb0000 (usable) [ 0.000000] BIOS-e820: 00000000dfeb0000 - 00000000dfec4000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfec4000 - 00000000dfec7000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfec7000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: FUJITSU SIEMENS ESPRIMO P5720 /D2581-A1, BIOS 6.00 R1.12.2581.A1 06/05/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 1 base 000000000 mask F00000000 write-back [ 0.000000] 2 base 100000000 mask FE0000000 write-back [ 0.000000] 3 base 0DFF00000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 1, base: 0GB, range: 4GB, type WB [ 0.000000] reg 2, base: 4GB, range: 512MB, type WB [ 0.000000] reg 3, base: 3583MB, range: 1MB, type UC [ 0.000000] total RAM covered: 4095M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3583MB, range: 1MB, type UC [ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 3, base: 4GB, range: 512MB, type WB [ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdfeb0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f7630] f7630 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfeb0000 [ 0.000000] 0000000000 - 00dfe00000 page 2M [ 0.000000] 00dfe00000 - 00dfeb0000 page 4k [ 0.000000] kernel direct mapping tables up to dfeb0000 @ dfeaa000-dfeb0000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ 11fffa000-120000000 [ 0.000000] RAMDISK: 35858000 - 36c24000 [ 0.000000] ACPI: RSDP 00000000000f7600 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 00000000dfebedce 00054 (v01 FSC PC 00060000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000dfec39fe 00074 (v01 FSC 00060000 000F4240) [ 0.000000] ACPI: DSDT 00000000dfebee22 04BDC (v01 FSC D2581/A1 00060000 MSFT 03000001) [ 0.000000] ACPI: FACS 00000000dfec6fc0 00040 [ 0.000000] ACPI: TCPA 00000000dfec3a72 00032 (v01 Phoeni x 00060000 TL 00000000) [ 0.000000] ACPI: SSDT 00000000dfec3aa4 0007A (v01 FSC CST_CPU0 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 00000000dfec3b1e 0007A (v01 FSC CST_CPU1 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 00000000dfec3b98 000B6 (v01 FSC PST_CPU0 00060000 CSF 00000001) [ 0.000000] ACPI: SSDT 00000000dfec3c4e 000B6 (v01 FSC PST_CPU1 00060000 CSF 00000001) [ 0.000000] ACPI: ASF! 00000000dfec3d04 00082 (v16 OEMID OEMTBL 00060000 PTL 00000001) [ 0.000000] ACPI: SLIC 00000000dfec3d86 00176 (v01 FSC PC 00060000 LTP 00000000) [ 0.000000] ACPI: MCFG 00000000dfec3efc 0003C (v01 PTLTD MCFG 00060000 LTP 00000000) [ 0.000000] ACPI: HPET 00000000dfec3f38 00038 (v01 PTLTD HPETTBL 00060000 LTP 00000001) [ 0.000000] ACPI: APIC 00000000dfec3f70 00068 (v01 PTLTD ? APIC 00060000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000dfec3fd8 00028 (v01 PTLTD $SBFTBL$ 00060000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b600000-ffff88011effffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000dfeb0 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1048125 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 898792 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfeb0000 - 00000000dfec4000 [ 0.000000] PM: Registered nosave memory: 00000000dfec4000 - 00000000dfec7000 [ 0.000000] PM: Registered nosave memory: 00000000dfec7000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000 [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s79616 r8192 d22784 u1048576 [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031992 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0-12-generic root=/dev/mapper/vg--haapa-lv--juuri ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4033076k/4718592k available (6104k kernel code, 526092k absent, 159424k reserved, 4880k data, 984k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2826.571 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5653.14 BogoMIPS (lpj=11306284) [ 0.004008] pid_max: default: 32768 minimum: 301 [ 0.004032] Security Framework initialized [ 0.004047] AppArmor: AppArmor initialized [ 0.004048] Yama: becoming mindful. [ 0.004384] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.006325] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.008807] Mount-cache hash table entries: 256 [ 0.008932] Initializing cgroup subsys cpuacct [ 0.008936] Initializing cgroup subsys memory [ 0.008944] Initializing cgroup subsys devices [ 0.008945] Initializing cgroup subsys freezer [ 0.008947] Initializing cgroup subsys net_cls [ 0.008949] Initializing cgroup subsys blkio [ 0.008955] Initializing cgroup subsys perf_event [ 0.008981] CPU: Physical Processor ID: 0 [ 0.008982] CPU: Processor Core ID: 0 [ 0.008984] mce: CPU supports 6 MCE banks [ 0.008992] CPU0: Thermal monitoring enabled (TM2) [ 0.008995] using mwait in idle threads. [ 0.011102] ACPI: Core revision 20110413 [ 0.016031] ftrace: allocating 25651 entries in 101 pages [ 0.020391] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063270] CPU0: Intel(R) Core(TM)2 Duo CPU E8300 @ 2.83GHz stepping 06 [ 0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.064003] ... version: 2 [ 0.064003] ... bit width: 40 [ 0.064003] ... generic registers: 2 [ 0.064003] ... value mask: 000000ffffffffff [ 0.064003] ... max period: 000000007fffffff [ 0.064003] ... fixed-purpose events: 3 [ 0.064003] ... event mask: 0000000700000003 [ 0.064003] Booting Node 0, Processors #1 Ok. [ 0.064003] smpboot cpu 1: start_ip = 98000 [ 0.152033] Brought up 2 CPUs [ 0.152037] Total of 2 processors activated (11305.55 BogoMIPS). [ 0.153677] devtmpfs: initialized [ 0.153677] PM: Registering ACPI NVS region at dfec4000 (12288 bytes) [ 0.153677] print_constraints: dummy: [ 0.153677] Time: 13:12:32 Date: 11/01/11 [ 0.153677] NET: Registered protocol family 16 [ 0.153677] Trying to unpack rootfs image as initramfs... [ 0.153677] ACPI: bus type pci registered [ 0.153677] PCI: MMCONFIG for domain 0000 [bus 00-05] at [mem 0xf8000000-0xf85fffff] (base 0xf8000000) [ 0.153677] PCI: MMCONFIG at [mem 0xf8000000-0xf85fffff] reserved in E820 [ 0.156160] PCI: Using configuration type 1 for base access [ 0.156791] bio: create slab at 0 [ 0.157515] ACPI: EC: Look up EC in DSDT [ 0.159462] ACPI: Interpreter enabled [ 0.159464] ACPI: (supports S0 S1 S3 S4 S5) [ 0.159478] ACPI: Using IOAPIC for interrupt routing [ 0.162126] ACPI: No dock devices found. [ 0.162128] HEST: Table not found. [ 0.162130] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.162465] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.163118] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.163121] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xfdff] [ 0.163122] pci_root PNP0A08:00: host bridge window [io 0xfe01-0xffff] [ 0.163124] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.163127] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] [ 0.163128] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.163130] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.163132] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] [ 0.163134] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] [ 0.163136] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf7ffffff] [ 0.163138] pci_root PNP0A08:00: host bridge window [mem 0xfc000000-0xfebfffff] [ 0.163140] pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfedfffff] [ 0.163142] pci_root PNP0A08:00: host bridge window [mem 0xfef00000-0xffafffff] [ 0.163144] pci_root PNP0A08:00: host bridge window [mem 0xffc00000-0xffefffff] [ 0.163155] pci 0000:00:00.0: [8086:29d0] type 0 class 0x000600 [ 0.163186] pci 0000:00:01.0: [8086:29d1] type 1 class 0x000604 [ 0.163209] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.163212] pci 0000:00:01.0: PME# disabled [ 0.163249] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 [ 0.163317] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f] [ 0.163379] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 [ 0.163419] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f] [ 0.163459] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 [ 0.163500] pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f] [ 0.163552] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 [ 0.163575] pci 0000:00:1a.7: reg 10: [mem 0xf2305000-0xf23053ff] [ 0.163646] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.163649] pci 0000:00:1a.7: PME# disabled [ 0.163673] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 [ 0.163686] pci 0000:00:1b.0: reg 10: [mem 0xf2300000-0xf2303fff 64bit] [ 0.163734] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.163738] pci 0000:00:1b.0: PME# disabled [ 0.163755] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 [ 0.163805] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.163808] pci 0000:00:1c.0: PME# disabled [ 0.163829] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604 [ 0.163878] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.163881] pci 0000:00:1c.4: PME# disabled [ 0.163900] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604 [ 0.163950] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.163953] pci 0000:00:1c.5: PME# disabled [ 0.163974] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 [ 0.164021] pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f] [ 0.164068] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 [ 0.164109] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf] [ 0.164149] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 [ 0.164190] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df] [ 0.164242] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 [ 0.164265] pci 0000:00:1d.7: reg 10: [mem 0xf2305400-0xf23057ff] [ 0.164344] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.164348] pci 0000:00:1d.7: PME# disabled [ 0.164369] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.164422] pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601 [ 0.164513] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.164518] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.164521] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 00ff) [ 0.164562] pci 0000:00:1f.2: [8086:2921] type 0 class 0x000101 [ 0.164576] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] [ 0.164583] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] [ 0.164590] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] [ 0.164597] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] [ 0.164606] pci 0000:00:1f.2: reg 20: [io 0x1c10-0x1c1f] [ 0.164615] pci 0000:00:1f.2: reg 24: [io 0x1c00-0x1c0f] [ 0.164656] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 [ 0.164671] pci 0000:00:1f.3: reg 10: [mem 0xf2305800-0xf23058ff 64bit] [ 0.164690] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff] [ 0.164718] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101 [ 0.164733] pci 0000:00:1f.5: reg 10: [io 0x1c68-0x1c6f] [ 0.164740] pci 0000:00:1f.5: reg 14: [io 0x1c5c-0x1c5f] [ 0.164747] pci 0000:00:1f.5: reg 18: [io 0x1c60-0x1c67] [ 0.164754] pci 0000:00:1f.5: reg 1c: [io 0x1c58-0x1c5b] [ 0.164761] pci 0000:00:1f.5: reg 20: [io 0x1c30-0x1c3f] [ 0.164769] pci 0000:00:1f.5: reg 24: [io 0x1c20-0x1c2f] [ 0.164808] pci 0000:00:1f.6: [8086:2932] type 0 class 0x001180 [ 0.164835] pci 0000:00:1f.6: reg 10: [mem 0xf2304000-0xf2304fff 64bit] [ 0.164941] pci 0000:01:00.0: [10de:0392] type 0 class 0x000300 [ 0.164948] pci 0000:01:00.0: reg 10: [mem 0xf1000000-0xf1ffffff] [ 0.164957] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.164965] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf0ffffff 64bit] [ 0.164971] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f] [ 0.164977] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.164999] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.165005] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.165008] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.165010] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.165013] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.165049] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.165052] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled) [ 0.165056] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.165061] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.165097] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 0.165100] pci 0000:00:1c.4: bridge window [io 0x0000-0x0000] (disabled) [ 0.165104] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.165109] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.165170] pci 0000:04:00.0: [14e4:167a] type 0 class 0x000200 [ 0.165194] pci 0000:04:00.0: reg 10: [mem 0xf2000000-0xf200ffff 64bit] [ 0.165299] pci 0000:04:00.0: PME# supported from D3hot D3cold [ 0.165304] pci 0000:04:00.0: PME# disabled [ 0.172025] pci 0000:00:1c.5: PCI bridge to [bus 04-04] [ 0.172029] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled) [ 0.172033] pci 0000:00:1c.5: bridge window [mem 0xf2000000-0xf20fffff] [ 0.172038] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.172105] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.172109] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.172112] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.172118] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.172120] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.172122] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode) [ 0.172124] pci 0000:00:1e.0: bridge window [io 0xfe01-0xffff] (subtractive decode) [ 0.172126] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.172128] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) [ 0.172130] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.172131] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.172133] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.172135] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.172137] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode) [ 0.172139] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff] (subtractive decode) [ 0.172141] pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfedfffff] (subtractive decode) [ 0.172143] pci 0000:00:1e.0: bridge window [mem 0xfef00000-0xffafffff] (subtractive decode) [ 0.172145] pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffefffff] (subtractive decode) [ 0.172165] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.172265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXA._PRT] [ 0.172299] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXB._PRT] [ 0.172330] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXC._PRT] [ 0.172357] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXD._PRT] [ 0.172404] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT] [ 0.172480] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.172483] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.172484] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.176162] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 7 9 10 *11 12 14 15) [ 0.176206] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 7 9 10 *11 12 14 15) [ 0.176247] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 7 *9 10 11 12 14 15) [ 0.176287] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 7 9 10 *11 12 14 15) [ 0.176328] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 7 9 *10 11 12 14 15) [ 0.176368] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 7 9 10 *11 12 14 15) [ 0.176410] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 7 9 10 11 12 14 15) *5 [ 0.176445] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 7 9 10 11 12 14 15) *0, disabled. [ 0.176539] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.176542] vgaarb: loaded [ 0.176543] vgaarb: bridge control possible 0000:01:00.0 [ 0.176694] SCSI subsystem initialized [ 0.176737] libata version 3.00 loaded. [ 0.176771] usbcore: registered new interface driver usbfs [ 0.176779] usbcore: registered new interface driver hub [ 0.176800] usbcore: registered new device driver usb [ 0.176866] PCI: Using ACPI for IRQ routing [ 0.176869] PCI: pci_cache_line_size set to 64 bytes [ 0.176943] reserve RAM buffer: 000000000009dc00 - 000000000009ffff [ 0.176945] reserve RAM buffer: 00000000dfeb0000 - 00000000dfffffff [ 0.177017] NetLabel: Initializing [ 0.177019] NetLabel: domain hash size = 128 [ 0.177020] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.177031] NetLabel: unlabeled traffic allowed by default [ 0.177062] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.177067] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.177071] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.180143] Switching to clocksource hpet [ 0.183504] Switched to NOHz mode on CPU #0 [ 0.183641] Switched to NOHz mode on CPU #1 [ 0.185567] AppArmor: AppArmor Filesystem Enabled [ 0.185592] pnp: PnP ACPI init [ 0.185608] ACPI: bus type pnp registered [ 0.185980] pnp 00:00: [bus 00-ff] [ 0.185983] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.185984] pnp 00:00: [io 0x0d00-0xfdff window] [ 0.185986] pnp 00:00: [io 0xfe01-0xffff window] [ 0.185988] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.185989] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.185991] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.185992] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.185994] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.185996] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.185997] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.185999] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.186001] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.186002] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.186004] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.186005] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.186009] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.186011] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.186013] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.186014] pnp 00:00: [mem 0xe0000000-0xf7ffffff window] [ 0.186016] pnp 00:00: [mem 0xfc000000-0xfebfffff window] [ 0.186018] pnp 00:00: [mem 0xfed00000-0xfedfffff window] [ 0.186019] pnp 00:00: [mem 0xfef00000-0xffafffff window] [ 0.186021] pnp 00:00: [mem 0xffc00000-0xffefffff window] [ 0.186068] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.186152] pnp 00:01: [io 0x002e-0x002f] [ 0.186154] pnp 00:01: [mem 0xfed40000-0xfed44fff] [ 0.186181] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.186262] pnp 00:02: [mem 0xffb00000-0xffbfffff] [ 0.186288] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.186359] pnp 00:03: [io 0x0010-0x001f] [ 0.186361] pnp 00:03: [io 0x0022-0x002d] [ 0.186362] pnp 00:03: [io 0x0030-0x003f] [ 0.186364] pnp 00:03: [io 0x0050-0x0053] [ 0.186365] pnp 00:03: [io 0x0062-0x0063] [ 0.186367] pnp 00:03: [io 0x0065-0x006f] [ 0.186368] pnp 00:03: [io 0x0074-0x007f] [ 0.186369] pnp 00:03: [io 0x0090-0x009f] [ 0.186371] pnp 00:03: [io 0x00a2-0x00b1] [ 0.186372] pnp 00:03: [io 0x00b2-0x00b3] [ 0.186374] pnp 00:03: [io 0x00b4-0x00bf] [ 0.186375] pnp 00:03: [io 0x00ec-0x00ef] [ 0.186376] pnp 00:03: [io 0x0072-0x0073] [ 0.186378] pnp 00:03: [io 0x004e-0x004f] [ 0.186379] pnp 00:03: [io 0x04d0-0x04d1] [ 0.186381] pnp 00:03: [io 0x1000-0x107f] [ 0.186382] pnp 00:03: [io 0x1100-0x110f] [ 0.186384] pnp 00:03: [io 0x1180-0x11bf] [ 0.186385] pnp 00:03: [io 0x0500-0x057f] [ 0.186386] pnp 00:03: [io 0x0800-0x080f] [ 0.186388] pnp 00:03: [io 0x0810-0x081f] [ 0.186389] pnp 00:03: [io 0xfe00] [ 0.186390] pnp 00:03: [io 0xff00] [ 0.186392] pnp 00:03: [mem 0xfec00000-0xfecfffff] [ 0.186393] pnp 00:03: [mem 0xfee00000-0xfeefffff] [ 0.186394] pnp 00:03: [mem 0xf8000000-0xfbffffff] [ 0.186396] pnp 00:03: [mem 0xfed19000-0xfed19fff] [ 0.186397] pnp 00:03: [mem 0xfed14000-0xfed17fff] [ 0.186399] pnp 00:03: [mem 0xfed18000-0xfed18fff] [ 0.186471] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 0.186473] system 00:03: [io 0x1000-0x107f] has been reserved [ 0.186475] system 00:03: [io 0x1100-0x110f] has been reserved [ 0.186477] system 00:03: [io 0x1180-0x11bf] has been reserved [ 0.186479] system 00:03: [io 0x0500-0x057f] has been reserved [ 0.186481] system 00:03: [io 0x0800-0x080f] has been reserved [ 0.186483] system 00:03: [io 0x0810-0x081f] has been reserved [ 0.186485] system 00:03: [io 0xfe00] has been reserved [ 0.186487] system 00:03: [io 0xff00] has been reserved [ 0.186492] system 00:03: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.186494] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.186496] system 00:03: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.186498] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.186500] system 00:03: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.186502] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.186505] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.186513] pnp 00:04: [io 0x0000-0x000f] [ 0.186517] pnp 00:04: [io 0x0080-0x008f] [ 0.186518] pnp 00:04: [io 0x00c0-0x00df] [ 0.186520] pnp 00:04: [dma 4] [ 0.186549] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.186559] pnp 00:05: [io 0x0070-0x0071] [ 0.186568] pnp 00:05: [irq 8] [ 0.186594] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.186604] pnp 00:06: [io 0x00f0-0x00fe] [ 0.186609] pnp 00:06: [irq 13] [ 0.186638] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.186646] pnp 00:07: [io 0x0061] [ 0.186671] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.186715] pnp 00:08: [mem 0xfed00000-0xfed003ff] [ 0.186742] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.186769] pnp 00:09: [io 0x0060] [ 0.186770] pnp 00:09: [io 0x0064] [ 0.186775] pnp 00:09: [irq 1] [ 0.186821] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.186866] pnp 00:0a: [irq 12] [ 0.186909] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.187046] pnp: PnP ACPI: found 11 devices [ 0.187047] ACPI: ACPI bus type pnp unregistered [ 0.192738] PCI: max bus depth: 1 pci_try_num: 2 [ 0.192781] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf2100000-0xf22fffff 64bit pref] [ 0.192784] pci 0000:00:1c.5: BAR 13: assigned [io 0x3000-0x3fff] [ 0.192788] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf2400000-0xf25fffff] [ 0.192792] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf2600000-0xf27fffff 64bit pref] [ 0.192794] pci 0000:00:1c.4: BAR 13: assigned [io 0x4000-0x4fff] [ 0.192798] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf2800000-0xf29fffff] [ 0.192801] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf2a00000-0xf2bfffff 64bit pref] [ 0.192804] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff] [ 0.192807] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000) [ 0.192809] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.192811] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.192814] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.192817] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.192820] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.192822] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff] [ 0.192826] pci 0000:00:1c.0: bridge window [mem 0xf2800000-0xf29fffff] [ 0.192830] pci 0000:00:1c.0: bridge window [mem 0xf2a00000-0xf2bfffff 64bit pref] [ 0.192835] pci 0000:00:1c.4: PCI bridge to [bus 03-03] [ 0.192837] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 0.192842] pci 0000:00:1c.4: bridge window [mem 0xf2400000-0xf25fffff] [ 0.192845] pci 0000:00:1c.4: bridge window [mem 0xf2600000-0xf27fffff 64bit pref] [ 0.192850] pci 0000:00:1c.5: PCI bridge to [bus 04-04] [ 0.192853] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff] [ 0.192857] pci 0000:00:1c.5: bridge window [mem 0xf2000000-0xf20fffff] [ 0.192860] pci 0000:00:1c.5: bridge window [mem 0xf2100000-0xf22fffff 64bit pref] [ 0.192865] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.192867] pci 0000:00:1e.0: bridge window [io disabled] [ 0.192871] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.192874] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.192888] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.192891] pci 0000:00:01.0: setting latency timer to 64 [ 0.192896] pci 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.192903] pci 0000:00:1c.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.192908] pci 0000:00:1c.0: setting latency timer to 64 [ 0.192913] pci 0000:00:1c.4: enabling device (0000 -> 0003) [ 0.192918] pci 0000:00:1c.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.192922] pci 0000:00:1c.4: setting latency timer to 64 [ 0.192929] pci 0000:00:1c.5: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.192932] pci 0000:00:1c.5: setting latency timer to 64 [ 0.192938] pci 0000:00:1e.0: setting latency timer to 64 [ 0.192941] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.192943] pci_bus 0000:00: resource 5 [io 0x0d00-0xfdff] [ 0.192945] pci_bus 0000:00: resource 6 [io 0xfe01-0xffff] [ 0.192946] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] [ 0.192948] pci_bus 0000:00: resource 8 [mem 0x000d0000-0x000d3fff] [ 0.192950] pci_bus 0000:00: resource 9 [mem 0x000d4000-0x000d7fff] [ 0.192951] pci_bus 0000:00: resource 10 [mem 0x000d8000-0x000dbfff] [ 0.192953] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000dffff] [ 0.192955] pci_bus 0000:00: resource 12 [mem 0x000e0000-0x000e3fff] [ 0.192957] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xf7ffffff] [ 0.192958] pci_bus 0000:00: resource 14 [mem 0xfc000000-0xfebfffff] [ 0.192960] pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfedfffff] [ 0.192962] pci_bus 0000:00: resource 16 [mem 0xfef00000-0xffafffff] [ 0.192963] pci_bus 0000:00: resource 17 [mem 0xffc00000-0xffefffff] [ 0.192965] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.192967] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf1ffffff] [ 0.192969] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.192971] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] [ 0.192972] pci_bus 0000:02: resource 1 [mem 0xf2800000-0xf29fffff] [ 0.192974] pci_bus 0000:02: resource 2 [mem 0xf2a00000-0xf2bfffff 64bit pref] [ 0.192976] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] [ 0.192978] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf25fffff] [ 0.192980] pci_bus 0000:03: resource 2 [mem 0xf2600000-0xf27fffff 64bit pref] [ 0.192982] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 0.192983] pci_bus 0000:04: resource 1 [mem 0xf2000000-0xf20fffff] [ 0.192985] pci_bus 0000:04: resource 2 [mem 0xf2100000-0xf22fffff 64bit pref] [ 0.192987] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.192989] pci_bus 0000:05: resource 5 [io 0x0d00-0xfdff] [ 0.192990] pci_bus 0000:05: resource 6 [io 0xfe01-0xffff] [ 0.192992] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff] [ 0.192994] pci_bus 0000:05: resource 8 [mem 0x000d0000-0x000d3fff] [ 0.192996] pci_bus 0000:05: resource 9 [mem 0x000d4000-0x000d7fff] [ 0.192997] pci_bus 0000:05: resource 10 [mem 0x000d8000-0x000dbfff] [ 0.192999] pci_bus 0000:05: resource 11 [mem 0x000dc000-0x000dffff] [ 0.193001] pci_bus 0000:05: resource 12 [mem 0x000e0000-0x000e3fff] [ 0.193002] pci_bus 0000:05: resource 13 [mem 0xe0000000-0xf7ffffff] [ 0.193004] pci_bus 0000:05: resource 14 [mem 0xfc000000-0xfebfffff] [ 0.193006] pci_bus 0000:05: resource 15 [mem 0xfed00000-0xfedfffff] [ 0.193007] pci_bus 0000:05: resource 16 [mem 0xfef00000-0xffafffff] [ 0.193009] pci_bus 0000:05: resource 17 [mem 0xffc00000-0xffefffff] [ 0.193041] NET: Registered protocol family 2 [ 0.193158] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.194087] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.197663] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.198153] TCP: Hash tables configured (established 524288 bind 65536) [ 0.198155] TCP reno registered [ 0.198165] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.198211] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.198334] NET: Registered protocol family 1 [ 0.198511] pci 0000:01:00.0: Boot video device [ 0.198516] PCI: CLS 32 bytes, default 64 [ 0.198518] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.198521] Placing 64MB software IO TLB between ffff8800dbeaa000 - ffff8800dfeaa000 [ 0.198522] software IO TLB at phys 0xdbeaa000 - 0xdfeaa000 [ 0.198536] Simple Boot Flag at 0x43 set to 0x1 [ 0.198802] audit: initializing netlink socket (disabled) [ 0.198812] type=2000 audit(1320153152.192:1): initialized [ 0.224728] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.245157] VFS: Disk quotas dquot_6.5.2 [ 0.245205] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.245675] fuse init (API version 7.16) [ 0.245742] msgmni has been set to 7877 [ 0.246001] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.246026] io scheduler noop registered [ 0.246028] io scheduler deadline registered [ 0.246059] io scheduler cfq registered (default) [ 0.246142] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.246168] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.246203] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.246243] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.246301] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.246342] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X [ 0.246398] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.246438] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X [ 0.246509] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.246526] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.246558] intel_idle: MWAIT substates: 0x22220 [ 0.246560] intel_idle: does not run on family 6 model 23 [ 0.246624] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.246629] ACPI: Power Button [PWRB] [ 0.246668] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.246671] ACPI: Power Button [PWRF] [ 0.246692] ACPI: acpi_idle registered with cpuidle [ 0.246718] Marking TSC unstable due to TSC halts in idle [ 0.247572] ERST: Table is not found! [ 0.247613] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.468905] Freeing initrd memory: 20272k freed [ 0.500932] Linux agpgart interface v0.103 [ 0.501865] brd: module loaded [ 0.502258] loop: module loaded [ 0.502375] ata_piix 0000:00:1f.2: version 2.13 [ 0.502398] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.502403] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 0.502442] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.502650] scsi0 : ata_piix [ 0.502718] scsi1 : ata_piix [ 0.502804] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c10 irq 14 [ 0.502808] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1c18 irq 15 [ 0.502825] ata_piix 0000:00:1f.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.502829] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.502871] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.503032] scsi2 : ata_piix [ 0.503085] scsi3 : ata_piix [ 0.503164] ata3: SATA max UDMA/133 cmd 0x1c68 ctl 0x1c5c bmdma 0x1c30 irq 22 [ 0.503167] ata4: SATA max UDMA/133 cmd 0x1c60 ctl 0x1c58 bmdma 0x1c38 irq 22 [ 0.503419] Fixed MDIO Bus: probed [ 0.503436] PPP generic driver version 2.4.2 [ 0.503462] tun: Universal TUN/TAP device driver, 1.6 [ 0.503463] tun: (C) 1999-2004 Max Krasnyansky [ 0.503524] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.503536] ehci_hcd 0000:00:1a.7: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 0.503551] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.503554] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.503580] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.503609] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.507491] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.507503] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf2305000 [ 0.520019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.520137] hub 1-0:1.0: USB hub found [ 0.520141] hub 1-0:1.0: 6 ports detected [ 0.520199] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.520207] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.520210] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.520234] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.520256] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.524156] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.524168] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf2305400 [ 0.540015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.540103] hub 2-0:1.0: USB hub found [ 0.540106] hub 2-0:1.0: 6 ports detected [ 0.540157] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.540166] uhci_hcd: USB Universal Host Controller Interface driver [ 0.540181] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.540185] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.540188] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.540216] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.540238] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 [ 0.540322] hub 3-0:1.0: USB hub found [ 0.540326] hub 3-0:1.0: 2 ports detected [ 0.540372] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 0.540378] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.540381] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.540407] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.540428] uhci_hcd 0000:00:1a.1: irq 18, io base 0x00001840 [ 0.540513] hub 4-0:1.0: USB hub found [ 0.540516] hub 4-0:1.0: 2 ports detected [ 0.540558] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 0.540563] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.540566] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.540592] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.540622] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860 [ 0.540704] hub 5-0:1.0: USB hub found [ 0.540707] hub 5-0:1.0: 2 ports detected [ 0.540752] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.540757] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.540760] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.540782] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.540803] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001880 [ 0.540893] hub 6-0:1.0: USB hub found [ 0.540900] hub 6-0:1.0: 2 ports detected [ 0.540945] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.540950] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.540952] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.540974] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.540995] uhci_hcd 0000:00:1d.1: irq 22, io base 0x000018a0 [ 0.541086] hub 7-0:1.0: USB hub found [ 0.541089] hub 7-0:1.0: 2 ports detected [ 0.541135] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.541139] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.541142] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.541170] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.541201] uhci_hcd 0000:00:1d.2: irq 21, io base 0x000018c0 [ 0.541281] hub 8-0:1.0: USB hub found [ 0.541284] hub 8-0:1.0: 2 ports detected [ 0.541357] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.544021] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.544026] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.544106] mousedev: PS/2 mouse device common for all mice [ 0.544205] rtc_cmos 00:05: RTC can wake from S4 [ 0.544290] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.544316] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.544389] device-mapper: uevent: version 1.0.3 [ 0.544439] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 0.544477] cpuidle: using governor ladder [ 0.544524] cpuidle: using governor menu [ 0.544526] EFI Variables Facility v0.08 2004-May-17 [ 0.544724] TCP cubic registered [ 0.544816] NET: Registered protocol family 10 [ 0.545177] NET: Registered protocol family 17 [ 0.545188] Registering the dns_resolver key type [ 0.545260] PM: Hibernation image not present or could not be loaded. [ 0.545270] registered taskstats version 1 [ 0.559785] Magic number: 3:650:229 [ 0.559884] rtc_cmos 00:05: setting system clock to 2011-11-01 13:12:32 UTC (1320153152) [ 0.559914] P-state transition latency capped at 20 uS [ 0.559978] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.559980] EDD information not available. [ 0.976091] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.976201] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.976306] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.976617] ata2.00: ATA-8: KINGSTON SV100S264G, D110225a, max UDMA/100 [ 0.976619] ata2.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.984116] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.984252] ata4.00: ATAPI: HL-DT-ST DVDRAM GH10N, EV03, max UDMA/100 [ 0.984492] ata1.00: ATA-7: SAMSUNG HD401LJ, ZZ100-15, max UDMA7 [ 0.984494] ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.984748] ata2.00: configured for UDMA/100 [ 0.992422] ata3.00: ATA-7: SAMSUNG HD401LJ, ZZ100-15, max UDMA7 [ 0.992424] ata3.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.992561] ata1.00: configured for UDMA/133 [ 0.992646] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD401LJ ZZ10 PQ: 0 ANSI: 5 [ 0.992748] sd 0:0:0:0: [sda] 781422768 512-byte logical blocks: (400 GB/372 GiB) [ 0.992756] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.992790] sd 0:0:0:0: [sda] Write Protect is off [ 0.992792] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.992811] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.992833] scsi 1:0:0:0: Direct-Access ATA KINGSTON SV100S2 D110 PQ: 0 ANSI: 5 [ 0.992918] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 0.992960] sd 1:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 0.993131] sd 1:0:0:0: [sdb] Write Protect is off [ 0.993134] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.993171] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.993772] sdb: sdb1 sdb2 [ 0.994048] sd 1:0:0:0: [sdb] Attached SCSI disk [ 0.997460] sda: sda1 sda2 [ 0.997695] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.000324] ata3.00: configured for UDMA/133 [ 1.000366] ata4.00: configured for UDMA/100 [ 1.000421] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD401LJ ZZ10 PQ: 0 ANSI: 5 [ 1.000492] sd 2:0:0:0: [sdc] 781422768 512-byte logical blocks: (400 GB/372 GiB) [ 1.000500] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.000543] sd 2:0:0:0: [sdc] Write Protect is off [ 1.000545] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.000580] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.003810] sdc: sdc1 sdc2 [ 1.004050] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.016030] usb 3-2: new low speed USB device number 2 using uhci_hcd [ 1.117580] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH10N EV03 PQ: 0 ANSI: 5 [ 1.230141] sr0: scsi3-mmc drive: 0x/0x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.230144] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.230211] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 1.230244] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 1.231680] Freeing unused kernel memory: 984k freed [ 1.231859] Write protecting the kernel read-only data: 10240k [ 1.232029] Freeing unused kernel memory: 20k freed [ 1.235778] Freeing unused kernel memory: 1400k freed [ 1.248693] udevd[93]: starting version 173 [ 1.298827] wmi: Mapper loaded [ 1.308981] [drm] Initialized drm 1.1.0 20060810 [ 1.311388] tg3.c:v3.119 (May 18, 2011) [ 1.311408] tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.311417] tg3 0000:04:00.0: setting latency timer to 64 [ 1.318503] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.318508] nouveau 0000:01:00.0: setting latency timer to 64 [ 1.330478] usbcore: registered new interface driver usbhid [ 1.330480] usbhid: USB HID core driver [ 1.332302] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x04b200b1) [ 1.335006] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 1.347808] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM95754) rev b002] (PCI Express) MAC address 00:19:99:31:11:58 [ 1.347812] tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 1.347814] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.347816] tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.379879] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 1.379883] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 1.379886] [drm] nouveau 0000:01:00.0: Bios version 05.73.22.54 [ 1.379888] [drm] nouveau 0000:01:00.0: TMDS table version 1.1 [ 1.379889] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed [ 1.379891] [drm] nouveau 0000:01:00.0: BIT table 'd' not found [ 1.379893] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0 [ 1.379895] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028 [ 1.379898] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 04011310 00000028 [ 1.379900] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 03011312 00000000 [ 1.379901] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020223f1 00c0c080 [ 1.379904] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2 [ 1.379907] [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 1.379909] [drm] nouveau 0000:01:00.0: 1: 0x00001130: type 0x30 idx 1 tag 0x07 [ 1.379911] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 1.379913] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff [ 1.379915] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff [ 1.379921] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCE0D [ 1.380161] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD4B7 [ 1.391496] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2 [ 1.391573] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-2/input0 [ 1.392285] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xDBEB [ 1.392299] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDD6F [ 1.395457] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDF7B [ 1.395474] [drm] nouveau 0000:01:00.0: timingset 255 does not exist [ 1.402931] md: bind [ 1.415578] [drm] nouveau 0000:01:00.0: 1 available performance level(s) [ 1.415582] [drm] nouveau 0000:01:00.0: 0: memory 400MHz core 400MHz voltage 1170mV fanspeed 100% [ 1.415589] [drm] nouveau 0000:01:00.0: c: memory 405MHz core 400MHz [ 1.415664] [TTM] Zone kernel: Available graphics memory: 2027876 kiB. [ 1.415666] [TTM] Initializing pool allocator. [ 1.415684] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM [ 1.415698] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 1.420235] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 1.421693] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.421695] [drm] No driver support for vblank timestamp query. [ 1.423281] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 1.423354] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 1.423357] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1) [ 1.423359] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [ 1.423361] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 1.423905] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input3 [ 1.424061] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-2/input1 [ 1.446977] md: bind [ 1.450184] md: raid1 personality registered for level 1 [ 1.450306] bio: create slab at 1 [ 1.450352] md/raid1:md0: active with 1 out of 2 mirrors [ 1.450364] md0: detected capacity change from 0 to 389348802560 [ 1.450604] RAID1 conf printout: [ 1.450606] --- wd:1 rd:2 [ 1.450608] disk 0, wo:0, o:1, dev:sdc2 [ 1.450610] disk 1, wo:1, o:1, dev:sda2 [ 1.450786] md: recovery of RAID array md0 [ 1.450788] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 1.450789] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery. [ 1.450792] md: using 128k window, over a total of 380223440k. [ 1.504461] md0: unknown partition table [ 1.536056] No connectors reported connected with modes [ 1.536067] [drm] Cannot find any crtc or sizes - going 1024x768 [ 1.536703] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo ffff880114248800 [ 1.536761] fbcon: nouveaufb (fb0) is primary device [ 1.536796] Console: switching to colour frame buffer device 128x48 [ 1.536811] fb0: nouveaufb frame buffer device [ 1.536812] drm: registered panic notifier [ 1.536818] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 1.842077] md: linear personality registered for level -1 [ 1.843140] md: multipath personality registered for level -4 [ 1.844181] md: raid0 personality registered for level 0 [ 1.846171] async_tx: api initialized (async) [ 1.912030] raid6: int64x1 2198 MB/s [ 1.980024] raid6: int64x2 2975 MB/s [ 2.048021] raid6: int64x4 2245 MB/s [ 2.116038] raid6: int64x8 1933 MB/s [ 2.184010] raid6: sse2x1 4958 MB/s [ 2.252015] raid6: sse2x2 5544 MB/s [ 2.320012] raid6: sse2x4 8297 MB/s [ 2.320014] raid6: using algorithm sse2x4 (8297 MB/s) [ 2.320286] xor: automatically using best checksumming function: generic_sse [ 2.340009] generic_sse: 10540.000 MB/sec [ 2.340010] xor: using function: generic_sse (10540.000 MB/sec) [ 2.340609] md: raid6 personality registered for level 6 [ 2.340611] md: raid5 personality registered for level 5 [ 2.340613] md: raid4 personality registered for level 4 [ 2.343959] md: raid10 personality registered for level 10 [ 7014.874000] md: md0: recovery done. [ 7017.899988] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7017.899991] ata3.00: BMDMA stat 0x25 [ 7017.899999] ata3.00: failed command: READ DMA EXT [ 7017.900019] ata3.00: cmd 25/00:00:80:80:93/00:03:2e:00:00/e0 tag 0 dma 393216 in [ 7017.900020] res 51/40:1f:62:81:93/40:02:2e:00:00/e0 Emask 0x9 (media error) [ 7017.900022] ata3.00: status: { DRDY ERR } [ 7017.900023] ata3.00: error: { UNC } [ 7017.924364] ata3.00: configured for UDMA/133 [ 7017.924487] ata3: EH complete [ 7021.043372] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7021.043375] ata3.00: BMDMA stat 0x25 [ 7021.043377] ata3.00: failed command: READ DMA EXT [ 7021.043383] ata3.00: cmd 25/00:00:80:80:93/00:03:2e:00:00/e0 tag 0 dma 393216 in [ 7021.043384] res 51/40:1f:62:81:93/40:02:2e:00:00/e0 Emask 0x9 (media error) [ 7021.043392] ata3.00: status: { DRDY ERR } [ 7021.043393] ata3.00: error: { UNC } [ 7021.176377] ata3.00: configured for UDMA/133 [ 7021.176478] ata3: EH complete [ 7024.294570] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7024.294572] ata3.00: BMDMA stat 0x25 [ 7024.294575] ata3.00: failed command: READ DMA EXT [ 7024.294580] ata3.00: cmd 25/00:00:80:80:93/00:03:2e:00:00/e0 tag 0 dma 393216 in [ 7024.294581] res 51/40:1f:62:81:93/40:02:2e:00:00/e0 Emask 0x9 (media error) [ 7024.294584] ata3.00: status: { DRDY ERR } [ 7024.294591] ata3.00: error: { UNC } [ 7024.316361] ata3.00: configured for UDMA/133 [ 7024.316465] ata3: EH complete [ 7027.437927] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7027.437929] ata3.00: BMDMA stat 0x25 [ 7027.437932] ata3.00: failed command: READ DMA EXT [ 7027.437937] ata3.00: cmd 25/00:00:80:80:93/00:03:2e:00:00/e0 tag 0 dma 393216 in [ 7027.437939] res 51/40:1f:62:81:93/40:02:2e:00:00/e0 Emask 0x9 (media error) [ 7027.437947] ata3.00: status: { DRDY ERR } [ 7027.437948] ata3.00: error: { UNC } [ 7027.460369] ata3.00: configured for UDMA/133 [ 7027.460477] ata3: EH complete [ 7030.581279] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7030.581282] ata3.00: BMDMA stat 0x25 [ 7030.581284] ata3.00: failed command: READ DMA EXT [ 7030.581290] ata3.00: cmd 25/00:00:80:80:93/00:03:2e:00:00/e0 tag 0 dma 393216 in [ 7030.581291] res 51/40:1f:62:81:93/40:02:2e:00:00/e0 Emask 0x9 (media error) [ 7030.581299] ata3.00: status: { DRDY ERR } [ 7030.581300] ata3.00: error: { UNC } [ 7030.604362] ata3.00: configured for UDMA/133 [ 7030.604467] ata3: EH complete [ 7033.724658] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7033.724660] ata3.00: BMDMA stat 0x25 [ 7033.724663] ata3.00: failed command: READ DMA EXT [ 7033.724668] ata3.00: cmd 25/00:00:80:80:93/00:03:2e:00:00/e0 tag 0 dma 393216 in [ 7033.724669] res 51/40:1f:62:81:93/40:02:2e:00:00/e0 Emask 0x9 (media error) [ 7033.724677] ata3.00: status: { DRDY ERR } [ 7033.724679] ata3.00: error: { UNC } [ 7033.870055] ata3.00: configured for UDMA/133 [ 7033.870168] sd 2:0:0:0: [sdc] Unhandled sense code [ 7033.870170] sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 7033.870173] sd 2:0:0:0: [sdc] Sense Key : Medium Error [current] [descriptor] [ 7033.870176] Descriptor sense data with sense descriptors (in hex): [ 7033.870178] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 7033.870184] 2e 93 81 62 [ 7033.870187] sd 2:0:0:0: [sdc] Add. Sense: Unrecovered read error - auto reallocate failed [ 7033.870191] sd 2:0:0:0: [sdc] CDB: Read(10): 28 00 2e 93 80 80 00 03 00 00 [ 7033.870198] end_request: I/O error, dev sdc, sector 781418850 [ 7033.870205] ata3: EH complete [ 7037.058774] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7037.058776] ata3.00: BMDMA stat 0x25 [ 7037.058779] ata3.00: failed command: READ DMA EXT [ 7037.058790] ata3.00: cmd 25/00:08:60:81:93/00:00:2e:00:00/e0 tag 0 dma 4096 in [ 7037.058791] res 51/40:07:62:81:93/40:00:2e:00:00/e0 Emask 0x9 (media error) [ 7037.058793] ata3.00: status: { DRDY ERR } [ 7037.058794] ata3.00: error: { UNC } [ 7037.080372] ata3.00: configured for UDMA/133 [ 7037.080379] ata3: EH complete [ 7040.202133] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7040.202135] ata3.00: BMDMA stat 0x25 [ 7040.202137] ata3.00: failed command: READ DMA EXT [ 7040.202143] ata3.00: cmd 25/00:08:60:81:93/00:00:2e:00:00/e0 tag 0 dma 4096 in [ 7040.202144] res 51/40:07:62:81:93/40:00:2e:00:00/e0 Emask 0x9 (media error) [ 7040.202147] ata3.00: status: { DRDY ERR } [ 7040.202154] ata3.00: error: { UNC } [ 7040.224364] ata3.00: configured for UDMA/133 [ 7040.224372] ata3: EH complete [ 7043.345528] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7043.345530] ata3.00: BMDMA stat 0x25 [ 7043.345533] ata3.00: failed command: READ DMA EXT [ 7043.345538] ata3.00: cmd 25/00:08:60:81:93/00:00:2e:00:00/e0 tag 0 dma 4096 in [ 7043.345540] res 51/40:07:62:81:93/40:00:2e:00:00/e0 Emask 0x9 (media error) [ 7043.345547] ata3.00: status: { DRDY ERR } [ 7043.345549] ata3.00: error: { UNC } [ 7043.368379] ata3.00: configured for UDMA/133 [ 7043.368386] ata3: EH complete [ 7046.488882] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7046.488885] ata3.00: BMDMA stat 0x25 [ 7046.488887] ata3.00: failed command: READ DMA EXT [ 7046.488893] ata3.00: cmd 25/00:08:60:81:93/00:00:2e:00:00/e0 tag 0 dma 4096 in [ 7046.488894] res 51/40:07:62:81:93/40:00:2e:00:00/e0 Emask 0x9 (media error) [ 7046.488902] ata3.00: status: { DRDY ERR } [ 7046.488903] ata3.00: error: { UNC } [ 7046.512372] ata3.00: configured for UDMA/133 [ 7046.512379] ata3: EH complete [ 7049.632251] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7049.632253] ata3.00: BMDMA stat 0x25 [ 7049.632256] ata3.00: failed command: READ DMA EXT [ 7049.632261] ata3.00: cmd 25/00:08:60:81:93/00:00:2e:00:00/e0 tag 0 dma 4096 in [ 7049.632262] res 51/40:07:62:81:93/40:00:2e:00:00/e0 Emask 0x9 (media error) [ 7049.632265] ata3.00: status: { DRDY ERR } [ 7049.632272] ata3.00: error: { UNC } [ 7049.656363] ata3.00: configured for UDMA/133 [ 7049.656371] ata3: EH complete [ 7052.775634] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 7052.775636] ata3.00: BMDMA stat 0x25 [ 7052.775638] ata3.00: failed command: READ DMA EXT [ 7052.775644] ata3.00: cmd 25/00:08:60:81:93/00:00:2e:00:00/e0 tag 0 dma 4096 in [ 7052.775645] res 51/40:07:62:81:93/40:00:2e:00:00/e0 Emask 0x9 (media error) [ 7052.775647] ata3.00: status: { DRDY ERR } [ 7052.775654] ata3.00: error: { UNC } [ 7052.921045] ata3.00: configured for UDMA/133 [ 7052.921053] sd 2:0:0:0: [sdc] Unhandled sense code [ 7052.921055] sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 7052.921058] sd 2:0:0:0: [sdc] Sense Key : Medium Error [current] [descriptor] [ 7052.921062] Descriptor sense data with sense descriptors (in hex): [ 7052.921064] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 7052.921077] 2e 93 81 62 [ 7052.921079] sd 2:0:0:0: [sdc] Add. Sense: Unrecovered read error - auto reallocate failed [ 7052.921082] sd 2:0:0:0: [sdc] CDB: Read(10): 28 00 2e 93 81 60 00 00 08 00 [ 7052.921088] end_request: I/O error, dev sdc, sector 781418850 [ 7052.921092] ata3: EH complete [ 7052.921102] md/raid1:md0: sdc: unrecoverable I/O read error for block 760443136 [ 7053.070341] RAID1 conf printout: [ 7053.070344] --- wd:1 rd:2 [ 7053.070346] disk 0, wo:0, o:1, dev:sdc2 [ 7053.070349] disk 1, wo:1, o:1, dev:sda2 [ 7053.070384] RAID1 conf printout: [ 7053.070386] --- wd:1 rd:2 [ 7053.070388] disk 0, wo:0, o:1, dev:sdc2 [ 7994.962240] [drm] nouveau 0000:01:00.0: 0xC26B: Parsing digital output script table [ 7995.011862] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2) [ 7995.011864] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A [ 8039.251044] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 8039.536095] udevd[489]: starting version 173 [ 8039.659292] Adding 1949692k swap on /dev/mapper/vg--haapa-lv--swap. Priority:-1 extents:1 across:1949692k [ 8039.671767] lp: driver loaded but no devices found [ 8039.741074] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 8039.837350] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16) [ 8039.866667] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 8039.874054] type=1400 audit(1320161191.811:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=735 comm="apparmor_parser" [ 8039.874355] type=1400 audit(1320161191.811:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=735 comm="apparmor_parser" [ 8039.874545] type=1400 audit(1320161191.811:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=735 comm="apparmor_parser" [ 8039.922088] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: discard [ 8040.096220] ppdev: user-space parallel port driver [ 8040.284978] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 8040.285034] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 8040.285060] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8040.375395] hda_codec: ALC262: BIOS auto-probing. [ 8040.388037] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 8040.644836] tg3 0000:04:00.0: irq 45 for MSI/MSI-X [ 8040.677697] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8040.681511] type=1400 audit(1320161192.619:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1140 comm="apparmor_parser" [ 8040.681807] type=1400 audit(1320161192.619:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1140 comm="apparmor_parser" [ 8040.681997] type=1400 audit(1320161192.619:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1140 comm="apparmor_parser" [ 8040.689461] type=1400 audit(1320161192.627:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1142 comm="apparmor_parser" [ 8040.689663] type=1400 audit(1320161192.627:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1142 comm="apparmor_parser" [ 8040.693709] type=1400 audit(1320161192.631:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1143 comm="apparmor_parser" [ 8040.712511] type=1400 audit(1320161192.651:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1141 comm="apparmor_parser" [ 8040.892679] init: failsafe main process (913) killed by TERM signal [ 8040.900257] init: apport pre-start process (1185) terminated with status 1 [ 8040.902250] init: apport post-stop process (1214) terminated with status 1 [ 8041.671216] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [ 8041.691241] [drm] nouveau 0000:01:00.0: 0xC26B: Parsing digital output script table [ 8041.740861] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2) [ 8041.740863] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A [ 8041.792874] Bluetooth: Core ver 2.16 [ 8041.792893] NET: Registered protocol family 31 [ 8041.792895] Bluetooth: HCI device and connection manager initialized [ 8041.792897] Bluetooth: HCI socket layer initialized [ 8041.792898] Bluetooth: L2CAP socket layer initialized [ 8041.793194] Bluetooth: SCO socket layer initialized [ 8041.814534] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8041.814537] Bluetooth: BNEP filters: protocol multicast [ 8041.841993] Bluetooth: RFCOMM TTY layer initialized [ 8041.842001] Bluetooth: RFCOMM socket layer initialized [ 8041.842003] Bluetooth: RFCOMM ver 1.11 [ 8042.304488] tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex [ 8042.304491] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX [ 8042.304831] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8042.949098] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 [ 8042.951501] EXT4-fs (dm-3): re-mounted. Opts: commit=0 [ 8042.953046] EXT4-fs (dm-2): re-mounted. Opts: discard,commit=0 [ 8043.044409] init: plymouth-stop pre-start process (1567) terminated with status 1 [ 8053.008796] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro,commit=0 [ 8053.048013] eth0: no IPv6 routers present [ 8053.100018] EXT4-fs (dm-3): re-mounted. Opts: commit=0,commit=0 [ 8053.105186] EXT4-fs (dm-2): re-mounted. Opts: discard,commit=0 [ 8066.326040] exe (2573): /proc/2573/oom_adj is deprecated, please use /proc/2573/oom_score_adj instead. [ 8438.676042] CE: hpet increased min_delta_ns to 20113 nsec [ 8811.602513] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on tmds encoder (output 2) [ 9111.612363] [drm] nouveau 0000:01:00.0: Setting dpms mode 2 on tmds encoder (output 2) [ 9411.612295] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2) [11982.755328] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 2) [14130.075695] process `skype' is using obsolete setsockopt SO_BSDCOMPAT