Viestit

1

Asentaminen ja käyttöönotto / Vs: Paketinhallinnassa jotain vikaa

« : 08.08.12 - klo:13.35 »

Olenkin sillä työkalulla yrittänyt, mutta SSD levyn kohdalla kyseinen testi ei tee mitään

2

Asentaminen ja käyttöönotto / Vs: Paketinhallinnassa jotain vikaa

« : 08.08.12 - klo:11.35 »

Tuollaiset ilmoitukset tuli siitä

Koodia: [Valitse]

Traceback (most recent call last):
  File "/usr/bin/software-center", line 25, in <module>
    from gi.repository import Gtk, GObject
  File "/usr/lib/python2.7/dist-packages/gi/__init__.py", line 23, in <module>
    from ._gi import _API, Repository
ImportError: could not import gobject (error was: '/usr/lib/python2.7/dist-packages/gi/_gobject/_gobject.so: undefined symbol: PyExc_RuotimeWarning')


3

Asentaminen ja käyttöönotto / Vs: Paketinhallinnassa jotain vikaa

« : 08.08.12 - klo:11.26 »

Hienoa, nyt näyttäisi apt-get toimivan ilman virheitä.

Graafiset kikkareet eivät edelleenkään suostu käynnistymään (enää ei tule edes virheilmoitusta).

4

Asentaminen ja käyttöönotto / Vs: Paketinhallinnassa jotain vikaa

« : 08.08.12 - klo:11.07 »

sudo apt-get -f install

Koodia: [Valitse]

Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  libunistring0:i386 language-pack-kde-zh-hans-base libgomp1:i386 wine-gecko1.4 wine-gecko1.4:i386
  wine-gecko1.5 wine-gecko1.5:i386 libcroco3:i386 language-pack-kde-en kde-l10n-engb libgettextpo0:i386
  language-pack-zh-hans-base kde-l10n-zhcn language-pack-zh-hans language-pack-kde-zh-hans
  language-pack-kde-en-base
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 15 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up doc-base (0.10.3) ...
Array found where operator expected at /usr/share/perl5/Debian/DocBase/Common.pm line 51, at end of line
(Do you need to predeclare o5r?)
String found where operator expected at /usr/share/perl5/Debian/DocBase/Common.pm line 58, near "'debiandoc-sgml'"
(Missing semicolon on previous line?)
String found where operator expected at /usr/share/perl5/Debian/DocBase/Common.pm line 63, near "00                           'htmH'"
(Missing operator before                            'htmH'?)
String found where operator expected at /usr/share/perl5/Debian/DocBase/Common.pm line 68, near "our $FLD_DOCUMENT   = '"
  (Might be a runaway multi-line '' string starting on line 64)
(Missing semicolon on previous line?)
Bad name after document' at /usr/share/perl5/Debian/DocBase/Common.pm line 68.
Compilation failed in require at /usr/sbin/install-docs line 8.
BEGIN failed--compilation aborted at /usr/sbin/install-docs line 8.
dpkg: error processing doc-base (--configure):
 subprocess installed post-installation script returned error exit status 255
Errors were encountered while processing:
 doc-base
E: Sub-process /usr/bin/dpkg returned an error code (1)
sudo apt-get clean (ei mitään tulostusta)
sudo apt-get install --reinstall doc-base

Koodia: [Valitse]

Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  libunistring0:i386 language-pack-kde-zh-hans-base libgomp1:i386 wine-gecko1.4 wine-gecko1.4:i386
  wine-gecko1.5 wine-gecko1.5:i386 libcroco3:i386 language-pack-kde-en kde-l10n-engb libgettextpo0:i386
  language-pack-zh-hans-base kde-l10n-zhcn language-pack-zh-hans language-pack-kde-zh-hans
  language-pack-kde-en-base
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 15 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up doc-base (0.10.3) ...
Array found where operator expected at /usr/share/perl5/Debian/DocBase/Common.pm line 51, at end of line
(Do you need to predeclare o5r?)
String found where operator expected at /usr/share/perl5/Debian/DocBase/Common.pm line 58, near "'debiandoc-sgml'"
(Missing semicolon on previous line?)
String found where operator expected at /usr/share/perl5/Debian/DocBase/Common.pm line 63, near "00                           'htmH'"
(Missing operator before                            'htmH'?)
String found where operator expected at /usr/share/perl5/Debian/DocBase/Common.pm line 68, near "our $FLD_DOCUMENT   = '"
  (Might be a runaway multi-line '' string starting on line 64)
(Missing semicolon on previous line?)
Bad name after document' at /usr/share/perl5/Debian/DocBase/Common.pm line 68.
Compilation failed in require at /usr/sbin/install-docs line 8.
BEGIN failed--compilation aborted at /usr/sbin/install-docs line 8.
dpkg: error processing doc-base (--configure):
 subprocess installed post-installation script returned error exit status 255
Errors were encountered while processing:
 doc-base
E: Sub-process /usr/bin/dpkg returned an error code (1)

5

Yleistä keskustelua / Vs: Unity - huonoko?

« : 08.08.12 - klo:11.01 »

Olen nyt noin kuukauden käytellyt unityä, ei mielestäni mikään hirveä roska, mutta ei myöskään ole missään vaiheessa erityisesti innostusta herättänyt.

Suurimmaksi osaksi on toiminut ihan moitteetta, mutta pikku vikoja / ongelmia löytyy, joiden kyllä uskon ajan kanssa tulevan paremmiksi.

-Virtuaalityöpöydät tuntuvat jotenkin kankeilta, eri pöytien välilä seilailu tuntuu hieman hankalalta. Chromen ikkunoita (jo avoinna olevia) ei esimerkiksi taida mitenkään saada toiselle pöydälle.
-Ohjelmien hälytykset (se sellanen vilkkuminen alapalkissa perinteisissä systeemeissä) ei mielestäni toimi kunnolla. Esim. jos skypen avoinna olevaan keskusteluun tulee uusi viesti, heiluu skypen ikoni vasemmalla hetken, mutta hetken päästä mikään ei enää indikoi uutta viestiä.
-Täyden ruudun ikkunaa ei pysty suoraan pienentämään mikäli se ei ole aktiivisena (esim pienempi ikkuna sen päällä)
-Saman ohjelman ikkunoiden välillä pomppiminen on hieman kankeaa, johtunee lähinnä turhasta animoinnista
-Ulkoisen kovalevyn tai roskakorin avaaminen toimii vaihtelevasti. Joskus ne avautuvat suoraan klikkaamalla, mutta toisinaan ne vain vilkuttavat home folderin ikonia.
-Itse pidän varsinkin uutta linuxin käyttäjää kohtaan tärkeänä, että jossain olisi perinteinen valikko kaikille ohjelmille ja asetuksille, sillä tällöin niitä selatessa oppii mitä kaikkea on mahdollista säätää

6

Asentaminen ja käyttöönotto / Vs: Paketinhallinnassa jotain vikaa

« : 08.08.12 - klo:07.41 »

Ensimmäisestä komennosta tuli Del -rimpsu ja jälkimmäisestä taas tutun näköistä:

Koodia: [Valitse]

Setting up doc-base (0.10.3) ...
Array found where operator expected at /usr/share/perl5/Debian/DocBase/Common.pm line 51, at end of line
(Do you need to predeclare o5r?)
String found where operator expected at /usr/share/perl5/Debian/DocBase/Common.pm line 58, near "'debiandoc-sgml'"
(Missing semicolon on previous line?)
String found where operator expected at /usr/share/perl5/Debian/DocBase/Common.pm line 63, near "00                           'htmH'"
(Missing operator before                            'htmH'?)
String found where operator expected at /usr/share/perl5/Debian/DocBase/Common.pm line 68, near "our $FLD_DOCUMENT   = '"
  (Might be a runaway multi-line '' string starting on line 64)
(Missing semicolon on previous line?)
Bad name after document' at /usr/share/perl5/Debian/DocBase/Common.pm line 68.
Compilation failed in require at /usr/sbin/install-docs line 8.
BEGIN failed--compilation aborted at /usr/sbin/install-docs line 8.
dpkg: error processing doc-base (--configure):
 subprocess installed post-installation script returned error exit status 255
Errors were encountered while processing:
 doc-base


7

Asentaminen ja käyttöönotto / Vs: Paketinhallinnassa jotain vikaa

« : 08.08.12 - klo:00.00 »

/usr/share/perl5/Debian/DocBase/Common.pm line 51
Rivillä olikin selvästi merkki, joka sinne ei kuulu. Muokkasin sen oikeaksi, mutta tuli muita ilmoituksia

Koodia: [Valitse]

Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  libunistring0:i386 language-pack-kde-zh-hans-base libgomp1:i386
  wine-gecko1.4 wine-gecko1.4:i386 wine-gecko1.5 wine-gecko1.5:i386
  libcroco3:i386 language-pack-kde-en kde-l10n-engb libgettextpo0:i386
  language-pack-zh-hans-base kde-l10n-zhcn language-pack-zh-hans
  language-pack-kde-zh-hans language-pack-kde-en-base
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up doc-base (0.10.3) ...
Array found where operator expected at /usr/share/perl5/Debian/DocBase/Common.pm line 51, at end of line
(Do you need to predeclare o5r?)
String found where operator expected at /usr/share/perl5/Debian/DocBase/Common.pm line 58, near "'debiandoc-sgml'"
(Missing semicolon on previous line?)
String found where operator expected at /usr/share/perl5/Debian/DocBase/Common.pm line 63, near "00                           'htmH'"
(Missing operator before                            'htmH'?)
String found where operator expected at /usr/share/perl5/Debian/DocBase/Common.pm line 68, near "our $FLD_DOCUMENT   = '"
  (Might be a runaway multi-line '' string starting on line 64)
(Missing semicolon on previous line?)
Bad name after document' at /usr/share/perl5/Debian/DocBase/Common.pm line 68.
Compilation failed in require at /usr/sbin/install-docs line 8.
BEGIN failed--compilation aborted at /usr/sbin/install-docs line 8.
dpkg: error processing doc-base (--configure):
 subprocess installed post-installation script returned error exit status 255
Errors were encountered while processing:
 doc-base
E: Sub-process /usr/bin/dpkg returned an error code (1)

Selvästi tiedostossa on muitakin virheitä, mutta niiden korjaaminen ei olekkaan minulle yhtä ilmiselviä.
Tässä vielä koko tiedosto nykyiseltään: http://pastebin.com/HuQuShXc

8

Asentaminen ja käyttöönotto / Paketinhallinnassa jotain vikaa

« : 07.08.12 - klo:16.41 »

Software centerin tai update managerin avaamisesta tulee ilmoitus "System program problem detected. Do you want to report the problem now?"

apt-get upgrade komennolla tulee lopuksi ilmoitus

Koodia: [Valitse]

Errors were encountered while processing:
 doc-base
E: Sub-process /usr/bin/dpkg returned an error code (1)

Sittemmin kokeilin apt-get install --reinstall doc-base:

Koodia: [Valitse]

Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  libunistring0:i386 language-pack-kde-zh-hans-base libgomp1:i386
  wine-gecko1.4 wine-gecko1.4:i386 wine-gecko1.5 wine-gecko1.5:i386
  libcroco3:i386 language-pack-kde-en kde-l10n-engb libgettextpo0:i386
  language-pack-zh-hans-base kde-l10n-zhcn language-pack-zh-hans
  language-pack-kde-zh-hans language-pack-kde-en-base
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up doc-base (0.10.3) ...
Array found where operator expected at /usr/share/perl5/Debian/DocBase/Common.pm line 51, at end of line
(Do you need to predeclare o5r?)
Unrecognized character \x12; marked by <-- HERE after PPORTED_FO<-- HERE near column 18 at /usr/share/perl5/Debian/DocBase/Common.pm line 51.
Compilation failed in require at /usr/sbin/install-docs line 8.
BEGIN failed--compilation aborted at /usr/sbin/install-docs line 8.
dpkg: error processing doc-base (--configure):
 subprocess installed post-installation script returned error exit status 255
Errors were encountered while processing:
 doc-base
E: Sub-process /usr/bin/dpkg returned an error code (1)

Aikaisemmin minulla oli ubuntu 10, jonka tiedostojärjestelmä meni rikki ja päivitin uuteen (ubuntu 12.04). Voisiko kovalevyssäni (SSD) olla jotain vikaa?

9

Multimedia ja grafiikka / Vs: [ratkaistu] uusi näytönohjain

« : 01.09.10 - klo:22.30 »

Katsotaan jos nämä Nvidian sivuilta ladatut toimisivat ihan hyvin (?). Pistit auttavan viestisi juuri kun muokkasin aloitusviestini, toivotaan kuitenkin että näillä selviän. Kiitos joka tapauksessa

10

Multimedia ja grafiikka / [ratkaistu] uusi näytönohjain

« : 01.09.10 - klo:22.12 »

Hommasin uuden näytönohjaimen (nvidia GTX 460). Poistin edellisen ajurit System -> Administration -> Hardware drivers

Laitoin uuden ohjaimen edellisen tilalle, käynnistin ubuntun eikä tuolta hardware drivers paikasta löydy ajureita.

Mitä pitäisi tehdä, jotta ohjain toimisi kunnolla?

Edit: Homma siis ratkesi lataamalla Nvidian sivuilta ajurit, sammuttamalla X:n ja asentamalla ne ajurit.

11

Multimedia ja grafiikka / Vs: Videon leikkaaminen

« : 04.08.10 - klo:14.58 »

No sain tuolla Avidemux:lla tämän kertaisen homman hoidettua. Täytyykin joskus kokeilla tuota kdenliveä.

Kiitoksia molemmille

12

Multimedia ja grafiikka / Videon leikkaaminen

« : 04.08.10 - klo:13.12 »

Yritän parin tunnin videosta napata muutaman minuutin pätkän. Videon resoluutio 1500x960 ja codec ITU H.264.

Openshot ensinnäkin jumittaa tosi paljon kun aikajanalla yrittää liikkua, ja renderöinnin päätteeksi se kaatuu aina.

Pitivi toimii, mutta renderöinnin lopputulos on hirveä. Haluan pitää tuon alkuperäisen resoluution, jolloin Pitivi jostain
syystä muuttaa videon resoluution pienemmäksi (äkkiseltään arvioiden n. 1000x700) ja sitten lisää reunoille mustaa.

Avidemux:lla ei pääse oiken mitään edes yrittämään, kun videon avaamisen jälkeen ohjelman napit joutuvat jonnekkin
näytön alareunan alapuolelle. Lisäksi se valittaa jotain "H.264 detected", tiedä sitten haittaisiko se mitään.

13

Ubuntu tietokoneissa / 9.10, hiiren rulla + virtuaalityöpöydät

« : 02.11.09 - klo:15.20 »

Päivitin ubuntun uuteen versioon. Nyt ei hiiren rullalla vaihdu työpöytä seuraavaan, kun osoitin on pelkän työpöydän päällä (ei ikkunan päällä).
Mistähän kyseisen asetuksen saisi takaisin kätevästi?

14

Laitealue / Vs: Hp w2007v, nvidia 7800GTX

« : 19.10.09 - klo:20.14 »

Vanhasta johdosta puuttuikin juuri kaksi nastaa, ilmeisesti siinä ei niitä ikinä ole ollutkaan.
Uudemmalla johdolla homma toimii juuri niin kuin pitääkin 

Kiitos!

15

Laitealue / Vs: Hp w2007v, nvidia 7800GTX

« : 19.10.09 - klo:03.55 »

tässä se /var/log/Xorg.0.log

Koodia: [Valitse]

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux Nip 2.6.28-15-generic #52-Ubuntu SMP Wed Sep 9 10:49:34 UTC 2009 i686
Build Date: 09 April 2009  02:10:02AM
xorg-server 2:1.6.0-0ubuntu14 (buildd@rothera.buildd)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 19 03:51:51 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@1:0:0) nVidia Corporation G70 [GeForce 7800 GTX] rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, I/O @ 0x0000af00/128, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module  180.44  Mon Mar 23 15:29:02 PST 2009
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  180.44  Mon Mar 23 15:05:32 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1360x768 +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
(II) NVIDIA(0): NVIDIA GPU GeForce 7800 GTX (G70) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.70.02.11.24
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7800 GTX at PCI:1:0:0:
(--) NVIDIA(0):     CRT-0
(--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "1360x768+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1360 x 768
(WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
(WW) NVIDIA(0):     from CRT-0's EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "1360x768+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device EL USB Keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) EL USB Keyboard: always reports core events
(**) EL USB Keyboard: Device: "/dev/input/event3"
(II) EL USB Keyboard: Found keys
(II) EL USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "EL USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) EL USB Keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) EL USB Keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "fi"
(**) EL USB Keyboard: xkb_layout: "fi"
(**) Option "xkb_variant" "classic"
(**) EL USB Keyboard: xkb_variant: "classic"
(II) config/hal: Adding input device EL USB Keyboard
(**) EL USB Keyboard: always reports core events
(**) EL USB Keyboard: Device: "/dev/input/event4"
(II) EL USB Keyboard: Found 1 mouse buttons
(II) EL USB Keyboard: Found keys
(II) EL USB Keyboard: Configuring as keyboard
(**) EL USB Keyboard: YAxisMapping: buttons 4 and 5
(**) EL USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "EL USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) EL USB Keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) EL USB Keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "fi"
(**) EL USB Keyboard: xkb_layout: "fi"
(**) Option "xkb_variant" "classic"
(**) EL USB Keyboard: xkb_variant: "classic"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event5"
(II) Logitech USB-PS/2 Optical Mouse: Found 8 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter chain progression: 2.00
(**) Logitech USB-PS/2 Optical Mouse: (accel) filter stage 0: 20.00 ms
(**) Logitech USB-PS/2 Optical Mouse: (accel) set acceleration profile 0

16

Laitealue / Vs: Hp w2007v, nvidia 7800GTX

« : 18.10.09 - klo:20.15 »

versio 180.44

17

Laitealue / Hp w2007v, nvidia 7800GTX [RATKAISTU]

« : 18.10.09 - klo:19.18 »

Asensin nvidian suljetut ajurit, mutta en saa asetettua näytölle sopivia resoluutioita.
Oikea resoluutio olisi 1680x1050. Suurin vaihtoehto nvidia-settings:llä on 1360x768.

Mitä pitäisi tehdä?