Kirjoittaja Aihe: Näytön Hz tippuu bootin jälkeen (RATKAISTU)  (Luettu 2606 kertaa)

veivi

  • Käyttäjä
  • Viestejä: 60
  • Se mikä ei tapa, niin perunatuttaa!!!
    • Profiili
Näytön Hz tippuu bootin jälkeen (RATKAISTU)
« : 14.01.08 - klo:16.52 »
Käytössäni on Kubuntu 7.10 Gutsy Gibbon ja Nvidia driver version 100.14.19

Ongelma: Jokaisen uudelleen käynnistämisen jälkeen näytön virkistystaajuus tipahtaa 60 Hz, jolloin ongelma on ratkaistava kirjoittamalla konsoleen § nvidia-settings ja asentaa hertsit 100:aan. Miten saisin tuon 100Hz pysymään vakiona?

Ja tässä ote  /etc/X11/xorg.conf -tiedostoa

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder3)  Wed Sep 12 14:30:30 PDT 2007

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg
#Section "InputDevice"
#   Identifier   "Configured Mouse"
#   Driver      "mouse"
#   Option      "CorePointer"
#   Option      "Device"   "/dev/input/mice"
#   Option      "Protocol"   "ImPS/2"
#   Option      "ZAxisMapping"   "4 5"
#   Option      "Emulate3Buttons"   "true"

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

   # path to defoma fonts
    FontPath        "/usr/share/fonts/X11/misc"
    FontPath        "/usr/share/fonts/X11/cyrillic"
    FontPath        "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath        "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath        "/usr/share/fonts/X11/Type1"
    FontPath        "/usr/share/fonts/X11/100dpi"
    FontPath        "/usr/share/fonts/X11/75dpi"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "vbe"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fi"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "evdev"
    Option         "CorePointer"
    Option         "Name" "Logitech USB Gaming Mouse"
    Option         "ZAxisMapping" "4 5 6 7"
    Option         "Emulate3Buttons" "false"
EndSection

Section "InputDevice"
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "SyncMaster"
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Samsung SyncMaster"
    HorizSync       30.0 - 110.0
    VertRefresh     50.0 - 160.0
# 1280x1024 @ 100Hz hsync: 108.5kHz
Modeline "1280x1024" 190.96  1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync

EndSection

Section "Device"
    Identifier     "nVidia Corporation NV43 [GeForce 6600 GT]"
    Driver         "nvidia"
    Option         "NoLogo" "False"
    BusID          "PCI:5:0:0"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 6600 GT"
    BusID          "PCI:5:0:0"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "nVidia Corporation NV43 [GeForce 6600 GT]"
    Monitor        "SyncMaster"
    DefaultDepth    24
    Option         "AddARGBVisuals" "True"
    Option         "AddARGBGLXVisuals" "True"
    SubSection     "Display"
        Depth       24
        Modes      "2048x1536" "1920x1440" "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1280x1024 +0+0; 1024x768 +0+0; 832x624 +0+0; 800x600 +0+0; 720x400 +0+0; 640x480 +0+0"
    Option         "SLI" "Auto"
    SubSection     "Display"
        Depth       24
        Modes      "nvidia-auto-select"
    EndSubSection
EndSection








t. veivi
« Viimeksi muokattu: 26.01.08 - klo:04.48 kirjoittanut veivi »
Linux käyttäjäksi 23. Syyskuuta 2007

http://forum.ubuntu-fi.org/index.php?action=profile;u=6635;sa=showPosts

Sony Vaio VPCF12S1E, Ubuntu 11.04 ja Win7

veivi

  • Käyttäjä
  • Viestejä: 60
  • Se mikä ei tapa, niin perunatuttaa!!!
    • Profiili
Vs: Näytön Hz tippuu bootin jälkeen (RATKAISTU)
« Vastaus #1 : 20.01.08 - klo:11.40 »
Ongelma on lähes ratkaistu, eli hertsit pysyy buutin jälkeen :)

Mutta...näyttäisi siltä, että koneeni käyttää kaksia eri ajureita (nv ja nvidian rajoitettuja 100.14.19) ja tähän haluaisin kyllä pikaisesti neuvoa, miten toimia?

Alla on hieman kerrottu siitä mitä olen tähän saakka tehnyt

1. Varmuuskopio omaan kotikansioon
Koodia: [Valitse]
sudo cp /etc/X11/xorg.conf /home/käyttäjätunnuksesi/xorg.conf_backup
2. Tämä komento muokkasi xorg.conf-tiedostoa haluamaani suuntaan
Koodia: [Valitse]
sudo nvidia-xconfig --add-argb-glx-visuals
3. Otin xorgista kopion työpöydälle, jota aloin muokkaamaan
Koodia: [Valitse]
sudo cp /etc/X11/xorg.conf /home/käyttäjätunnuksesi/Desktop/xorg.conf

4. Poistin tiedoston: /home/käyttäjätunnuksesi/.kde/share/config/displayconfigrc (kotikansio->näytä->näytä piilotiedotot) ja sitten koneen buuttaus
Koodia: [Valitse]
sudo shutdown -r now
5. Seuraavaksi valitsen nvidian asetukset (resoluutio 1280x1024 ja 100Hz) painan apply ja quit
Koodia: [Valitse]
sudo nvidia-settings
6. Kokeilen säilyvätkö asetukset-> Ctrl+Alt+backspace->kirjaudun uudelleen sisään ja tarkistan-> nvidian asetukset  ;D

7. Jos jotain sattui menemän mönkään, niin otin käyttöön alkuperäiset xorg.conffat ja yritin uudelleen  :'(
Koodia: [Valitse]
sudo cp /home/käyttäjätunnuksesi/xorg.conf /etc/X11/xorg.conf
Koodia: [Valitse]
startx
Ja tältä se näyttää nyt

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder3)  Wed Sep 12 14:30:30 PDT 2007

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Wed Sep 12 14:29:35 PDT 2007
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg
#Section "InputDevice"
#   Identifier   "Configured Mouse"
#   Driver      "mouse"
#   Option      "CorePointer"
#   Option      "Device"   "/dev/input/mice"
#   Option      "Protocol"   "ImPS/2"
#   Option      "ZAxisMapping"   "4 5"
#   Option      "Emulate3Buttons"   "true"
### Monitors -----------------------------------------------

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

   # path to defoma fonts
    FontPath        "/usr/share/fonts/X11/misc"
    FontPath        "/usr/share/fonts/X11/cyrillic"
    FontPath        "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath        "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath        "/usr/share/fonts/X11/Type1"
    FontPath        "/usr/share/fonts/X11/100dpi"
    FontPath        "/usr/share/fonts/X11/75dpi"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "int10"
    Load           "vbe"
    Load           "glx"
    Load           "v4l"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fi"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "evdev"
    Option         "CorePointer"
    Option         "Name" "Logitech USB Gaming Mouse"
    Option         "ZAxisMapping" "4 5 6 7"
    Option         "Emulate3Buttons" "false"
EndSection

Section "InputDevice"
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"   
    Identifier     "SyncMaster"
    VendorName     "Samsung"
    ModelName      "Syncmaster 959NF"
    HorizSync       30.0 - 110.0
    VertRefresh     50.0 - 160.0
# Monitori 100Hz -------------------------------------------------------------------------
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
Modeline "1280x1024_100" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync

# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
Modeline "1280x960_100" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync

# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
Modeline "1024x768_100" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync

# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
Modeline "800x600_100" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync

EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Samsung SyncMaster"
    HorizSync       30.0 - 110.0
    VertRefresh     50.0 - 160.0
    Gamma           1
# Monitori 100Hz -------------------------------------------------------------------------
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
Modeline "1280x1024_100" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync

# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
Modeline "1280x960_100" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync

# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
Modeline "1024x768_100" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync

# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
Modeline "800x600_100" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync

EndSection

Section "Monitor"

 #
    Identifier     "monitor1"
    Gamma           1
EndSection

Section "Monitor"

 #
    Identifier     "monitor2"
    Gamma           1
EndSection

Section "Device"
    Identifier     "nVidia Corporation NV43 [GeForce 6600 GT]"
    Driver         "nvidia"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 6600 GT"
    BusID          "PCI:5:0:0"
EndSection

Section "Device"

 #
    Identifier     "device1"
    Driver         "nv"
    VendorName     "NVIDIA"
    BoardName      "NVIDIA GeForce 6 Series"
    BusID          "PCI:4:0:0"
    Screen          0
EndSection

Section "Device"

 #
    Identifier     "device2"
    Driver         "nvidia"
    BoardName      "nv"
    BusID          "PCI:5:0:0"
    Screen          1
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "nVidia Corporation NV43 [GeForce 6600 GT]"
    Monitor        "SyncMaster"
    DefaultDepth    24
    Option         "AddARGBVisuals" "True"
    Option         "SLI" "Auto"
    Option         "NvAGP" "1"
    Option         "NoLogo" "True"
    Option         "AddARGBGLXVisuals" "True"
    SubSection     "Display"
        Depth       24
        Modes      "1280x1024_100" "1024x768_100" "1280x960_100" "800x600_100"
    EndSubSection
EndSection

Section "Screen"

# Removed Option "metamodes" "1280x1024_100_0 +0+0; 1024x768_100_0 +0+0; 1280x960_100_0 +0+0; 800x600_100_0 +0+0"
# Removed Option "metamodes" "nvidia-auto-select 1024x768_100 +0+0"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "AddARGBGLXVisuals" "True"
    Option         "TwinView" "0"
    Option         "metamodes" "1280x1024_100_0 +0+0; 1024x768_100_0 +0+0; 1280x960_100_0 +0+0; 800x600_100_0 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"

 #
    Identifier     "screen1"
    Device         "device1"
    Monitor        "monitor1"
    DefaultDepth    24
EndSection

Section "Screen"

 #
    Identifier     "screen2"
    Device         "device2"
    Monitor        "monitor2"
    DefaultDepth    24



EndSection


« Viimeksi muokattu: 01.02.08 - klo:10.47 kirjoittanut veivi »
Linux käyttäjäksi 23. Syyskuuta 2007

http://forum.ubuntu-fi.org/index.php?action=profile;u=6635;sa=showPosts

Sony Vaio VPCF12S1E, Ubuntu 11.04 ja Win7

jori52

  • Käyttäjä
  • Viestejä: 2047
    • Profiili
Vs: Näytön Hz tippuu bootin jälkeen (osittain ratkaistu)
« Vastaus #2 : 20.01.08 - klo:20.36 »
Kokeile järjestelmä>ylläpito>näytöt ja kuva muuta molemmat näytöt sekä näyttö 1 että näyttö 2 haluamaasi resoluutioon että virkistys taajuuteen, on jollekin ollut apu siitä.

Terveisin jori52  ;)
Linux counter #348392
 Asus G750JW ja ubuntu 13.10

veivi

  • Käyttäjä
  • Viestejä: 60
  • Se mikä ei tapa, niin perunatuttaa!!!
    • Profiili
Vs: Näytön Hz tippuu bootin jälkeen (RATKAISTU)
« Vastaus #3 : 22.01.08 - klo:16.22 »
Ei onnistunut tuo :( joten tein seuraavaa:

I decided to update by drivers from 100.14.19 to 169.07 by taking the following steps:

1-Disabled restricted driver usage from Restricted Drivers Manager. (poista rajoitetut ajurit käytöstä)
2-Removed the 100.14.19 drivers (nvidia-glx-new) via Synaptic Package Manager. (poista kokonaan Synapticilla)
3-Stopped gdm/kdm  and installed the latest nvidia drivers (NVIDIA-Linux-x86-169.09-pkg1.run) and also modified the "linux-restricted-modules-common" file to prevent the restricted modules from being loaded at boot (e.g. DISABLED_MODULES="nv").
4-Restarted gdm/kdm. Lähde: http://ubuntuforums.org/showthread.php?t=649875


1. Lataa uusimmat ajurit työpöydällesi http://www.nvidia.com/object/linux_display_ia32_169.09.html

2. Tekstitilassa X:n ollessa suljettuna
2.1 Sammuta X Ctrl+Alt+backspace

3. Paina Ctrl+Alt+F1
4. Kirjoita cd ~/Desktop

Koodia: [Valitse]
sudo /etc/init.d/kdm stop tai sudo /etc/init.d/gdm
5. Paina jälleen Ctrl+Alt+F1 (nyt pitäisi näkyä cd ~/Desktop)

Koodia: [Valitse]
sudo sh NVIDIA-Linux-x86-169.09-pkg1.run
6. Vastaa kaikkiin kohtiin YES ja Ajureiden pitäisi olla asennettuna

7. Lopuksi Disabloi nv-ajuri (e.g. DISABLED_MODULES="nv")
 
Koodia: [Valitse]
sudo nano /etc/default/linux-restricted-modules-common

Ja tässä uusin xorg.conf

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder3)  Wed Sep 12 14:30:30 PDT 2007

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg
#Section "InputDevice"
#   Identifier   "Configured Mouse"
#   Driver      "mouse"
#   Option      "CorePointer"
#   Option      "Device"   "/dev/input/mice"
#   Option      "Protocol"   "ImPS/2"
#   Option      "ZAxisMapping"   "4 5"
#   Option      "Emulate3Buttons"   "true"

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

   # path to defoma fonts
    FontPath        "/usr/share/fonts/X11/misc"
    FontPath        "/usr/share/fonts/X11/cyrillic"
    FontPath        "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath        "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath        "/usr/share/fonts/X11/Type1"
    FontPath        "/usr/share/fonts/X11/100dpi"
    FontPath        "/usr/share/fonts/X11/75dpi"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "vbe"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fi"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "evdev"
    Option         "CorePointer"
    Option         "Name" "Logitech USB Gaming Mouse"
    Option         "ZAxisMapping" "4 5 6 7"
    Option         "Emulate3Buttons" "false"
EndSection

Section "InputDevice"
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "SyncMaster"
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Samsung SyncMaster"
    HorizSync       30.0 - 110.0
    VertRefresh     50.0 - 160.0
    ModeLine       "1024x768_100" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
    ModeLine       "800x600_100" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync

EndSection

Section "Device"
    Identifier     "nVidia Corporation NV43 [GeForce 6600 GT]"
    Driver         "nvidia"
    Option         "NoLogo" "False"
    BusID          "PCI:5:0:0"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 6600 GT"
    BusID          "PCI:5:0:0"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "nVidia Corporation NV43 [GeForce 6600 GT]"
    Monitor        "SyncMaster"
    DefaultDepth    24
    Option         "AddARGBVisuals" "True"
    Option         "AddARGBGLXVisuals" "True"
    SubSection     "Display"
        Depth       24
        Modes      "1024x768"  "800x600"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "metamodes" "1024x768_100_0 +0+0; 800x600_100_0 +0+0"
    Option         "SLI" "Auto"
    SubSection     "Display"
        Depth       24
        Modes      "nvidia-auto-select"
    EndSubSection
EndSection
« Viimeksi muokattu: 26.01.08 - klo:04.45 kirjoittanut veivi »
Linux käyttäjäksi 23. Syyskuuta 2007

http://forum.ubuntu-fi.org/index.php?action=profile;u=6635;sa=showPosts

Sony Vaio VPCF12S1E, Ubuntu 11.04 ja Win7